Datasheet SN74LVC157AD, SN74LVC157ADBLE, SN74LVC157ADBR, SN74LVC157ADR, SN74LVC157APWLE Datasheet (Texas Instruments)
...
SN74LVC157A
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SCAS292G – JANUARY 1993 – REVISED OCTOBER 1998
D
EPIC
(Enhanced-Performance Implanted
CMOS) Submicron Process
D
Typical V
< 0.8 V at V
D
Typical V
> 2 V at V
D
Inputs Accept Voltages to 5.5 V
D
ESD Protection Exceeds 2000 V Per
(Output Ground Bounce)
OLP
= 3.3 V, TA = 25°C
CC
(Output VOH Undershoot)
OHV
= 3.3 V, TA = 25°C
CC
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D
Latch-Up Performance Exceeds 250 mA Per
D, DB, OR PW PACKAGE
(TOP VIEW)
A/B
1A
1B
1Y
2A
2B
2Y
GND
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
V
CC
G
4A
4B
4Y
3A
3B
9
3Y
JESD 17
D
Package Options Include Plastic
Small-Outline (D), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages
description
This quadruple 2-line to 1-line data selector/multiplexer is designed for 1.65-V to 3.6-V VCC operation.
The SN74LVC157A features a common strobe (G
the strobe is low, a 4-bit word is selected from one of two sources and is routed to the four outputs. The device
provides true data.
) input. When the strobe is high, all outputs are low. When
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
The SN74LVC157A is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
G A/B A B
H X X X L
L LLX L
LLHX H
LHXL L
LHXH H
OUTPUT
Y
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1998, Texas Instruments Incorporated
1
SN74LVC157A
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SCAS292G – JANUARY 1993 – REVISED OCTOBER 1998
logic symbol
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
†
15
A/B
1A
1B
2A
2B
3A
3B
4A
4B
G
1
2
3
5
6
11
10
14
13
EN
G1
1
1
MUX
logic diagram (positive logic)
2
1A
3
1B
12
4
1Y
7
2Y
9
3Y
4Y
4
1Y
2A
2B
3A
3B
4A
4B
A/B
5
7
12
2Y
9
3Y
4Y
6
11
10
14
13
15
G
1
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
VCCSuppl
oltage
V
IOHHigh-level output current
mA
IOLLow-level output current
mA
SN74LVC157A
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SCAS292G – JANUARY 1993 – REVISED OCTOBER 1998
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
Input voltage range, V
Output voltage range, V
Input clamp current, I
Output clamp current, I
Continuous output current, I
Continuous current through V
Package thermal impedance, θ
–0.5 V to 6.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
(see Note 1) –0.5 V to 6.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I
(see Notes 1 and 2) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
(VI < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IK
(VO < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OK
±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
or GND ±100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
(see Note 3): D package 113°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JA
†
DB package 131°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 149°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The value of VCC is provided in the recommended operating conditions table.
3. The package thermal impedance is calculated in accordance with JESD 51.
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
recommended operating conditions (see Note 4)
MIN MAX UNIT
pp
y v
V
V
V
V
∆t/∆v Input transition rise or fall rate 0 10 ns/V
T
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
High-level input voltage
IH
Low-level input voltage
IL
Input voltage 0 5.5 V
I
Output voltage 0 V
O
p
p
Operating free-air temperature –40 85 °C
A
Implications of Slow or Floating CMOS Inputs
, literature number SCBA004.
Operating 1.65 3.6
Data retention only 1.5
VCC = 1.65 V to 1.95 V 0.65 × V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V 2
VCC = 1.65 V to 1.95 V 0.35 × V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V 0.8
VCC = 1.65 V –4
VCC = 2.3 V –8
VCC = 2.7 V –12
VCC = 3 V –24
VCC = 1.65 V 4
VCC = 2.3 V 8
VCC = 2.7 V 12
VCC = 3 V 24
CC
1.7
0.7
CC
V
CC
V
V
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
SN74LVC157A
V
V
I
mA
(INPUT)
(OUTPUT)
PARAMETER
UNIT
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SCAS292G – JANUARY 1993 – REVISED OCTOBER 1998
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER TEST CONDITIONS
IOH = –100 µA 1.65 V to 3.6 V VCC–0.2
IOH = –4 mA 1.65 V 1.2
OH
V
OL
I
I
I
CC
∆I
CC
C
†
All typical values are at VCC = 3.3 V, TA = 25°C.
i
IOH = –8 mA 2.3 V 1.7
= –12
OH
IOH = –24 mA 3 V 2.2
IOL = 100 µA 1.65 V to 3.6 V 0.2
IOL = 4 mA 1.65 V 0.45
IOL = 8 mA 2.3 V 0.7
IOL = 12 mA 2.7 V 0.4
IOL = 24 mA 3 V 0.55
VI = 5.5 V or GND 3.6 V ±5 µA
VI = VCC or GND, IO = 0 3.6 V 10 µA
One input at VCC – 0.6 V,
Other inputs at VCC or GND
VI = VCC or GND 3.3 V 5 pF
V
CC
2.7 V 2.2
3 V 2.4
2.7 V to 3.6 V 500 µA
MIN TYP†MAX UNIT
V
switching characteristics over recommended operating free-air temperature range (unless
otherwise noted) (see Figures 1 through 3)
PARAMETER
t
pd
‡
t
sk(o)
‡
Skew between any two outputs of the same package switching in the same direction
FROM
A or B 13.9 1 7.9 5.9 1 5.2
A/B
G 15.8 1 9.8 7.8 1 6.5
TO
Y
VCC = 1.8 V
TYP MIN MAX MIN MAX MIN MAX
16.1 1 10.1 8.1 1 6.8
VCC = 2.5 V
± 0.2 V
VCC = 2.7 V
VCC = 3.3 V
± 0.3 V
UNIT
ns
1 ns
operating characteristics, T
C
4
Power dissipation capacitance f = 10 MHz 14 15 16 pF
pd
= 25°C
A
CONDITIONS
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TEST
VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V
TYP TYP TYP
From Output
Under Test
CL = 30 pF
(see Note A)
SN74LVC157A
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SCAS292G – JANUARY 1993 – REVISED OCTOBER 1998
PARAMETER MEASUREMENT INFORMATION
V
= 1.8 V ± 0.15 V
CC
2 × V
Open
GND
CC
TEST S1
t
pd
t
PLZ/tPZL
t
PHZ/tPZH
Open
2 × V
Open
CC
1 kΩ
1 kΩ
S1
LOAD CIRCUIT
Timing
Input
t
Data
Input
Input
t
PLH
Output
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2 ns, tf ≤ 2 ns.
D. The outputs are measured one at a time with one transition per measurement.
E. t
PLZ
F. t
PZL
G. t
PLH
VCC/2
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VCC/2 VCC/2
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
and t
PHZ
and t
PZH
and t
PHL
VCC/2
t
su
are the same as t
are the same as ten.
are the same as tpd.
h
VCC/2
VCC/2 VCC/2
.
dis
t
PHL
V
0 V
V
0 V
V
0 V
V
V
CC
CC
CC
OH
OL
Input
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 2 × V
(see Note B)
Output
Waveform 2
S1 at Open
(see Note B)
VOLTAGE WAVEFORMS
PULSE DURATION
t
PZL
CC
t
PZH
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
VCC/2
VCC/2
t
w
V
0 V
V
0 V
V
V
V
0 V
CC
CC
CC
OL
OH
VCC/2VCC/2
VCC/2VCC/2
t
PLZ
VOL + 0.15 V
t
PHZ
VOH – 0.15 V
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
SN74LVC157A
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SCAS292G – JANUARY 1993 – REVISED OCTOBER 1998
PARAMETER MEASUREMENT INFORMATION
V
= 2.5 V ± 0.2 V
CC
2 × V
From Output
Under Test
CL = 30 pF
(see Note A)
500 Ω
500 Ω
S1
Open
GND
CC
t
PLZ/tPZL
t
PHZ/tPZH
TEST S1
t
pd
Open
2 × V
GND
CC
LOAD CIRCUIT
Timing
Input
t
Data
Input
Input
t
PLH
Output
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr ≤ 2 ns, tf ≤ 2 ns.
D. The outputs are measured one at a time with one transition per measurement.
E. t
PLZ
F. t
PZL
G. t
PLH
VCC/2
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
VCC/2 VCC/2
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
and t
PHZ
and t
PZH
and t
PHL
VCC/2
t
su
are the same as t
are the same as ten.
are the same as tpd.
h
VCC/2
VCC/2 VCC/2
.
dis
t
PHL
V
0 V
V
0 V
V
0 V
V
V
CC
CC
CC
OH
OL
Input
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 2 × V
(see Note B)
Output
Waveform 2
S1 at GND
(see Note B)
VOLTAGE WAVEFORMS
PULSE DURATION
t
PZL
CC
t
PZH
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
VCC/2
VCC/2
t
w
V
0 V
V
0 V
V
V
V
0 V
CC
CC
CC
OL
OH
VCC/2VCC/2
VCC/2VCC/2
t
PLZ
VOL + 0.15 V
t
PHZ
VOH – 0.15 V
Figure 2. Load Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN74LVC157A
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER
SCAS292G – JANUARY 1993 – REVISED OCTOBER 1998
PARAMETER MEASUREMENT INFORMATION
V
= 2.7 V AND 3.3 V ± 0.3 V
CC
From Output
Under Test
CL = 50 pF
(see Note A)
Timing
Input
Data
Input
Input
t
PLH
Output
500 Ω
500 Ω
LOAD CIRCUIT
1.5 V
t
su
1.5 V 1.5 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
1.5 V 1.5 V
1.5 V 1.5 V
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
t
h
S1
t
PHL
6 V
GND
2.7 V
0 V
2.7 V
0 V
2.7 V
0 V
V
V
Open
OH
OL
Input
Output
Control
(low-level
enabling)
Output
Waveform 1
S1 at 6 V
(see Note B)
Output
Waveform 2
S1 at GND
(see Note B)
TEST S1
t
pd
t
PLZ/tPZL
t
PHZ/tPZH
1.5 V 1.5 V
VOLTAGE WAVEFORMS
PULSE DURATION
t
PZL
t
PZH
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
t
w
t
1.5 V
t
1.5 V
Open
6 V
GND
1.5 V1.5 V
PLZ
PHZ
VOL + 0.3 V
VOH – 0.3 V
2.7 V
0 V
2.7 V
0 V
3 V
V
OL
V
OH
0 V
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤10 MHz, ZO = 50 Ω, tr ≤2.5 ns, tf ≤2.5 ns.
D. The outputs are measured one at a time with one transition per measurement.
E. t
F. t
G. t
PLZ
PZL
PLH
and t
and t
and t
are the same as t
PHZ
are the same as ten.
PZH
are the same as tpd.
PHL
dis
.
Figure 3. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
7
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
Loading...