Texas Instruments SN74LVC14AD, SN74LVC14ADBLE, SN74LVC14ADBR, SN74LVC14ADR, SN74LVC14APWLE Datasheet
...
SN54LVC14A, SN74LVC14A
HEX SCHMITT-TRIGGER INVERTERS
SCAS285L – MARCH 1993 – REVISED JUL Y 1999
D
EPIC
(Enhanced-Performance Implanted
CMOS) Submicron Process
D
Typical V
(Output Ground Bounce)
OLP
< 0.8 V at VCC = 3.3 V, TA = 25°C
D
Typical V
> 2 V at V
D
Inputs Accept Voltages to 5.5 V
D
ESD Protection Exceeds 2000 V Per
(Output VOH Undershoot)
OHV
= 3.3 V, TA = 25°C
CC
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D
Latch-Up Performance Exceeds 250 mA Per
JESD 17
D
Package Options Include Plastic
Small-Outline (D), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages, Ceramic Flat (W) Packages, Chip
Carriers (FK), and DIPs (J)
description
The SN54LVC14A hex Schmitt-trigger inverter is
designed for 2.7-V to 3.6-V VCC operation and the
SN74LVC14A hex Schmitt-trigger inverter is
designed for 1.65-V to 3.6-V VCC operation.
The devices contain six independent inverters,
and perform the Boolean function Y = A.
SN54LVC14A...J OR W PACKAGE
SN74LVC14A. . . D, DB, OR PW PACKAGE
SN54LVC14. . . FK PACKAGE
2A
NC
2Y
NC
3A
NC – No internal connection
(TOP VIEW)
1A
1
1Y
2
2A
3
2Y
4
3A
5
6
3Y
GND
7
(TOP VIEW)
1Y1ANC
3212019
4
5
6
7
8
910111213
3Y
GND
NC
14
13
12
11
10
9
8
CC
V
4Y
V
6A
6Y
5A
5Y
4A
4Y
6A
18
17
16
15
14
4A
CC
6Y
NC
5A
NC
5Y
Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators
in a mixed 3.3-V/5-V system environment.
The SN54LVC14A is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74LVC14A is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
(each inverter)
INPUTAOUTPUT
H L
L H
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Y
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1999, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1
SN54LVC14A, SN74LVC14A
HEX SCHMITT-TRIGGER INVERTERS
SCAS285L – MARCH 1993 – REVISED JUL Y 1999
logic symbol
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, DB, J, PW, and W packages.
†
1
1A
3
2A 2Y
5
3A 3Y
9
4A 4Y
11
5A 5Y
13
6A 6Y
10
12
2
1Y
4
6
8
logic diagram, each inverter (positive logic)
YA
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC –0.5 V to 6.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) –0.5 V to 6.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, VO (see Notes 1 and 2) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, I
Continuous current through VCC or GND ±100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
Storage temperature range, T
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The value of VCC is provided in the recommended operating conditions table.
3. The package thermal impedance is calculated in accordance with JESD 51.
±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
(see Note 3): D package 127°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JA
DB package 158°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 170°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
‡
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
UNIT
VCCSuppl
oltage
V
IOHHigh-level output current
mA
IOLLow-level output current
mA
SN54LVC14A, SN74LVC14A
HEX SCHMITT-TRIGGER INVERTERS
SCAS285L – MARCH 1993 – REVISED JUL Y 1999
recommended operating conditions (see Note 4)
SN54LVC14A SN74LVC14A
MIN MAX MIN MAX
pp
y v
V
V
T
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Input voltage 0 5.5 0 5.5 V
I
Output voltage 0 V
O
p
p
Operating free-air temperature –55 125 –40 85 °C
A
Implications of Slow or Floating CMOS Inputs
Operating 2 3.6 1.65 3.6
Data retention only 1.5 1.5
CC
VCC = 1.65 V –4
VCC = 2.3 V –8
VCC = 2.7 V –12 –12
VCC = 3 V –24 –24
VCC = 1.65 V 4
VCC = 2.3 V 8
VCC = 2.7 V 12 12
VCC = 3 V 24 24
, literature number SCBA004.
0 V
CC
V
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
Loading...