Texas Instruments SN74HC74DBR, SN74HC74DR, SN74HC74N, SN74HC74N3, SN74HC74NSR Datasheet
...
SN54HC74, SN74HC74
DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
WITH CLEAR AND PRESET
SCLS094B – DECEMBER 1982 – REVISED MA Y 1997
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Package Options Include Plastic
Small-Outline (D), Shrink Small-Outline
(DB), Thin Shrink Small-Outline (PW), and
Ceramic Flat (W) Packages, Ceramic Chip
Carriers (FK), and Standard Plastic (N) and
Ceramic (J) 300-mil DIPs
description
The ’HC74 contain two independent D-type
positive-edge-triggered flip-flops. A low level at
the preset (PRE) or clear (CLR) inputs sets or
resets the outputs regardless of the levels of the
other inputs. When PRE and CLR are inactive
(high), data at the data (D) input meeting the setup
time requirements are transferred to the outputs
on the positive-going edge of the clock (CLK)
pulse. Clock triggering occurs at a voltage level
and is not directly related to the rise time of CLK.
Following the hold-time interval, data at the
D input can be changed without affecting the
levels at the outputs.
The SN54HC74 is characterized for operation
over the full military temperature range –55°C to
125°C. The SN74HC74 is characterized for
operation from –40°C to 85°C.
FUNCTION TABLE
INPUTS
OUTPUTS
PRE CLR CLK D Q Q
L H X X H L
H LXXLH
L LXXH†H
†
H H ↑ HHL
H H ↑ LLH
H H L X Q
0
Q
0
†
This configuration is unstable; that is, it does not
persist when PRE
or CLR returns to its inactive
(high) level.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1CLR
1D
1CLK
1PRE
1Q
1Q
GND
V
CC
2CLR
2D
2CLK
2PRE
2Q
2Q
SN54HC74 . . . J OR W PACKAGE
SN74HC74 . . . D, DB, N, OR PW PACKAGE
(TOP VIEW)
3212019
910111213
4
5
6
7
8
18
17
16
15
14
2D
NC
2CLK
NC
2PRE
1CLK
NC
1PRE
NC
1Q
1D
1CLR
NC
2Q
2Q
V
2CLR
1Q
GND
NC
SN54HC74 . . . FK PACKAGE
(TOP VIEW)
CC
NC – No internal connection
Copyright 1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
SN54HC74, SN74HC74
DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
WITH CLEAR AND PRESET
SCLS094B – DECEMBER 1982 – REVISED MA Y 1997
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
logic symbol
†
S
4
3
5
1D
2
R
1
9
10
11
12
13
6
8
1PRE
1CLK
1D
2PRE
1CLR
2CLK
2D
2CLR
1Q
1Q
2Q
2Q
C1
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, DB, J, N, PW, and W packages.
logic diagram (positive logic)
PRE
CLK
D
CLR
Q
Q
C
C
C
C
C
C
C
C
C
C
TG
TG
TG
TG
absolute maximum ratings over operating free-air temperature range
‡
Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0 or VI > VCC) (see Note 1) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VCC) (see Note 1) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, I
O
(VO = 0 to VCC) ±25 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through VCC or GND ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
JA
(see Note 2): D package 127°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DB package 158°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N package 78°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 170°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51, except for through-hole packages, which use a trace
length of zero.
SN54HC74, SN74HC74
DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
WITH CLEAR AND PRESET
SCLS094B – DECEMBER 1982 – REVISED MA Y 1997
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
recommended operating conditions
SN54HC74 SN74HC74
MIN NOM MAX MIN NOM MAX
UNIT
V
CC
Supply voltage 2 5 6 2 5 6 V
VCC = 2 V 1.5 1.5
V
IH
High-level input voltage
VCC = 4.5 V
3.15 3.15
V
VCC = 6 V 4.2 4.2
VCC = 2 V 0 0.5 0 0.5
V
IL
Low-level input voltage
VCC = 4.5 V
0 1.35 0 1.35
V
VCC = 6 V 0 1.8 0 1.8
V
I
Input voltage 0 V
CC
0 V
CC
V
V
O
Output voltage 0 V
CC
0 V
CC
V
VCC = 2 V 0 1000 0 1000
t
t
Input transition (rise and fall) time
VCC = 4.5 V
0 500 0 500
ns
VCC = 6 V 0 400 0 400
T
A
Operating free-air temperature –55 125 –40 85 °C
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
TA = 25°C SN54HC74 SN74HC74
PARAMETER
TEST CONDITIONS
V
CC
MIN TYP MAX MIN MAX MIN MAX
UNIT
2 V 1.9 1.998 1.9 1.9
IOH = –20 µA
4.5 V 4.4 4.499 4.4 4.4
V
OH
VI = VIH or V
IL
6 V 5.9 5.999 5.9 5.9
V
IOH = –4 mA 4.5 V 3.98 4.3 3.7 3.84
IOH = –5.2 mA 6 V 5.48 5.8 5.2 5.34
2 V 0.002 0.1 0.1 0.1
IOL = 20 µA
4.5 V 0.001 0.1 0.1 0.1
V
OL
VI = VIH or V
IL
6 V 0.001 0.1 0.1 0.1
V
IOL = 4 mA 4.5 V 0.17 0.26 0.4 0.33
IOL = 5.2 mA 6 V 0.15 0.26 0.4 0.33
I
I
VI = VCC or 0 6 V ±0.1 ±100 ±1000 ±1000 nA
I
CC
VI = VCC or 0, IO = 0 6 V 4 80 40 µA
C
i
2 V to 6 V 3 10 10 10 pF
SN54HC74, SN74HC74
DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
WITH CLEAR AND PRESET
SCLS094B – DECEMBER 1982 – REVISED MA Y 1997
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
timing requirements over recommended operating free-air temperature range (unless otherwise
noted)
TA = 25°C SN54HC74 SN74HC74
V
CC
MIN MAX MIN MAX MIN MAX
UNIT
2 V 0 6 0 4.2 0 5
f
clock
Clock frequency
4.5 V
0 31 0 21 0 25
MHz
6 V 0 36 0 25 0 29
2 V 100 150 125
PRE or CLR low
4.5 V 20 30 25
6 V 17 25 21
twPulse duration
2 V 80 120 100
ns
CLK high or low
4.5 V 16 24 20
6 V 14 20 17
2 V 100 150 125
Data
4.5 V 20 30 25
p
6 V 17 25 21
tsuSetup time before CLK↑
2 V 25 40 30
ns
PRE or CLR inactive
4.5 V 5 8 6
6 V 4 7 5
2 V 0 0 0
t
h
Hold time, data after CLK
↑
4.5 V 0 0 0
ns
6 V 0 0 0
switching characteristics over recommended operating free-air temperature range, CL = 50 pF
(unless otherwise noted) (see Figure 1)
FROM TO
TA = 25°C SN54HC74 SN74HC74
PARAMETER
(INPUT) (OUTPUT)
V
CC
MIN TYP MAX MIN MAX MIN MAX
UNIT
2 V 6 10 4.2 5
f
max
4.5 V 31 50 21 25
MHz
6 V 36 60 25 29
2 V 70 230 345 290
PRE or CLR Q or Q
4.5 V 20 46 69 58
6 V 15 39 59 49
t
pd
2 V 70 175 250 220
ns
CLK Q or Q
4.5 V 20 35 50 44
6 V 15 30 42 37
2 V 28 75 110 95
t
t
Q or Q
4.5 V 8 15 22 19
ns
6 V 6 13 19 16
operating characteristics, TA = 25°C
PARAMETER TEST CONDITIONS TYP UNIT
C
pd
Power dissipation capacitance per flip-flop No load 35 pF
SN54HC74, SN74HC74
DUAL D-TYPE POSITIVE-EDGE-TRIGGERED FLIP-FLOPS
WITH CLEAR AND PRESET
SCLS094B – DECEMBER 1982 – REVISED MA Y 1997
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
VOLTAGE WAVEFORMS
SETUP AND HOLD AND INPUT RISE AND FALL TIMES
VOLTAGE WAVEFORMS
PULSE DURATIONS
t
h
t
su
50%
50%50%
10%10%
90% 90%
V
CC
V
CC
0 V
0 V
t
r
t
f
Reference
Input
Data
Input
50%
High-Level
Pulse
50%
V
CC
0 V
50%
50%
V
CC
0 V
t
w
Low-Level
Pulse
VOLTAGE WAVEFORMS
PROPAGATION DELAY AND OUTPUT TRANSITION TIMES
50%
50%50%
10%10%
90% 90%
V
CC
V
OH
V
OL
0 V
t
r
t
f
Input
In-Phase
Output
50%
t
PLH
t
PHL
50% 50%
10% 10%
90%90%
V
OH
V
OL
t
r
t
f
t
PHL
t
PLH
Out-of-Phase
Output
Test
Point
From Output
Under Test
CL = 50 pF
(see Note A)
LOAD CIRCUIT
NOTES: A. CL includes probe and test-fixture capacitance.
B. Phase relationships between waveforms were chosen arbitrarily. All input pulses are supplied by generators having the following
characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 6 ns, tf = 6 ns.
C. For clock inputs, f
max
is measured when the input duty cycle is 50%.
D. The outputs are measured one at a time with one input transition per measurement.
E. t
PLH
and t
PHL
are the same as tpd.
Figure 1. Load Circuit and Voltage Waveforms
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICA TIONS IS UNDERSTOOD T O
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
Loading...