Texas Instruments SN54F373J, SN74F373DBLE, SN74F373DBR, SN74F373DW, SN74F373DWR Datasheet

SN54F373, SN74F373
OCTAL TRANSPARENT D-TYPE LATCHES
WITH 3-STATE OUTPUTS
SDFS076A – D2932, MARCH 1987 – REVISED OCT OBER 1993
Eight Latches in a Single Package
Full Parallel Access for Loading
Buffered Control Inputs
Package Options Include Plastic
Small-Outline (SOIC) and Shrink Small-Outline (SSOP) Packages, Ceramic Chip Carriers, and Plastic and Ceramic DIPs
description
These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight latches of the F373 are transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs will follow the data (D) inputs. When the latch enable is taken low, the Q outputs are latched at the logic levels set up at the D inputs.
A buffered output-enable (OE to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly . The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
) input can be used
SN54F373 ...J PACKAGE
SN74F373 ... DB, DW, OR N PACKAGE
SN54F373 . . . FK PACKAGE
2D 2Q 3Q 3D 4D
(TOP VIEW)
OE
1Q 1D 2D 2Q 3Q 3D 4D 4Q
GND
(TOP VIEW)
1D1QOE
3 2 1 20 19
4 5 6 7 8
9 10 11 12 13
4Q
1 2 3 4 5 6 7 8 9 10
GND
LE
20 19 18 17 16 15 14 13 12 11
V
CC
5Q
8Q
18 17 16 15 14
5D
V 8Q 8D 7D 7Q 6Q 6D 5D 5Q LE
CC
8D 7D 7Q 6Q 6D
The output-enable (OE
) input does not affect the internal operations of the latches. Old data can be retained
or new data can be entered while the outputs are in the high-impedance state. The SN74F373 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count
and functionality of standard small-outline packages in less than half the printed-circuit-board area. The SN54F373 is characterized for operation over the full military temperature range of –55°C to 125°C. The
SN74F373 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
(each latch)
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
INPUTS
OE LE D
L H H H L HL L L LX Q
H X X Z
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
OUTPUT
Q
0
Copyright 1993, Texas Instruments Incorporated
1
SN54F373, SN74F373
UNIT
OCTAL TRANSPARENT D-TYPE LATCHES WITH 3-STATE OUTPUTS
SDFS076A – D2932, MARCH 1987 – REVISED OCT OBER 1993
1 11
3 4 7 8 13 14 17 18
EN C1
1D
2 5 6
9 12 15 16 19
logic diagram (positive logic)
1
OE
11
LE
1Q 2Q 3Q 4Q 5Q 6Q 7Q 8Q
1D
3
To Seven Other Channels
C1 1D
2
1Q
logic symbol
OE LE
1D 2D 3D 4D 5D 6D 7D 8D
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
Input voltage range, VI (see Note 1) –1.2 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current range –30 mA to 5 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage range applied to any output in the disabled or power-off state –0.5 V to 5.5 V. . . . . . . . . . . . . . . . . . .
Voltage range applied to any output in the high state –0.5 V to V
Current into any output in the low state: SN54F373 40 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range: SN54F373 –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The input voltage ratings may be exceeded provided the input current ratings are observed.
–0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN74F373 48 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN74F373 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
recommended operating conditions
V
CC
V
IH
V
IL
I
IK
I
OH
I
OL
T
A
2
Supply voltage 4.5 5 5.5 4.5 5 5.5 V High-level input voltage 2 2 V Low-level input voltage 0.8 0.8 V Input clamp current –18 –18 mA High-level output current –3 –3 mA Low-level output current 20 24 mA Operating free-air temperature –55 125 0 70 °C
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
SN54F373 SN74F373
MIN NOM MAX MIN NOM MAX
Loading...
+ 2 hidden pages