Datasheet SN74BCT29863BNT, SN74BCT29863BDW, SN74BCT29863BDWR Datasheet (Texas Instruments)

SN54BCT29863B, SN74BCT29863B
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS015D – NOVEMBER 1988 – REVISED NOVEMBER 1993
Copyright 1993, Texas Instruments Incorporated
2–1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
BiCMOS Design Substantially Reduces I
Functionally Equivalent to ′ALS29863 and
AMD Am29863A
Power-Up High-Impedance State
ESD Protection Exceeds 2000 V Per
MIL-STD-883C, Method 3015
Package Options Include Plastic
Small-Outline Packages (DW), Ceramic Chip Carriers (FK) and Flatpacks (W), and Standard Plastic and Ceramic 300-mil DIPs (JT, NT)
description
These 9-bit transceivers are designed for asynchronous communication between data buses. The control-function implementation allows for maximum flexibility in timing.
These devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending upon the logic levels at the output-enable (OEBA
and OEAB) inputs.
The outputs are in the high-impedance state during power-up and power-down conditions. The outputs remain in the high-impedance state while the device is powered down.
The SN54BCT29863B is characterized for operation over the full military temperature range of –55°C to 125°C. The SN74BCT29863B is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
INPUTS
OEAB1 OEAB2 OEBA1 OEBA2
OPERATION
L L L L Latch A and B L L H X L LXH
A to B
H X L L X HLL
B to A
H X H X H XXH X HXH
Isolation
X H H X
1 2 3 4 5 6 7 8 9 10 11 12
24 23 22 21 20 19 18 17 16 15 14 13
OEBA1
A1 A2 A3 A4 A5 A6 A7 A8 A9
OEBA2
GND
V
CC
B1 B2 B3 B4 B5 B6 B7 B8 B9 OEAB2 OEAB1
SN54BCT29863B . . . JT OR W PACKAGE
SN74BCT29863B . . . DW OR NT PACKAGE
(TOP VIEW)
321
13 14
5 6 7 8 9 10 11
B3 B4 B5 NC B6 B7 B8
A3 A4 A5
NC
A6 A7 A8
4
15 16 17
18
GND
NC
OEAB1
B9
A2A1OEBA1
NC
SN54BCT29863B . . . FK PACKAGE
(TOP VIEW)
28 27 26
25 24 23 22 21 20 19
12
A9
B1
B2
V
CC
NC – No internal connection
OEBA2
OEAB2
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
SN54BCT29863B, SN74BCT29863B 9-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SCBS015D – NOVEMBER 1988 – REVISED NOVEMBER 1993
2–2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
logic symbol
logic diagram (positive logic)
2
A1
1 11 13 14
B1
23
3
A2 B2
22
4
A3 B3
21
5
A4 B4
20
6
A5 B5
19
7
A6 B6
18
8
A7 B7
17
9
A8 B8
16
10
A9 B9
15
OEBA1 OEBA2 OEAB1 OEAB2
&
&
EN1
2
1
EN2
A1 B1
23
11
OEBA
1
1
2
14
13
OEBA2
OEAB1 OEAB2
To Eight Other Channels
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the DW, JT, NT, and W packages.
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range (I/O ports) (see Note 1) –0.5 V to 5.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range (excluding I/O ports) (see Note 1) –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Voltage range applied to any output in the high state –0.5 V to V
CC
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current –30 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Current into any output in the low state: SN54BCT29863B 48 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN74BCT29863B 96 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range: SN54BCT29863B –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SN74BCT29863B 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: The negative input voltage ratings may be exceeded if the input current rating is observed.
SN54BCT29863B, SN74BCT29863B
9-BIT BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCBS015D – NOVEMBER 1988 – REVISED NOVEMBER 1993
2–3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
recommended operating conditions
SN54BCT29863B SN74BCT29863B
MIN NOM MAX MIN NOM MAX
UNIT
V
CC
Supply voltage 4.5 5 5.5 4.5 5 5.5 V
V
IH
High-level input voltage 2 2 V
V
IL
Low-level input voltage 0.8 0.8 V
I
IK
Input clamp current –18 –18 mA
I
OH
High-level output current –15 –24 mA
I
OL
Low-level output current 24 48 mA
T
A
Operating free-air temperature –55 125 0 70 °C
electrical characteristics over recommended operating free-air temperature range (unless otherwise noted)
SN54BCT29863B SN74BCT29863B
PARAMETER
TEST CONDITIONS
MIN TYP†MAX MIN TYP†MAX
UNIT
V
IK
VCC = 4.5 V, II = –18 mA –1.2 –1.2 V
IOH = –15 mA 2.4 3.3 2.4 3.3
V
OH
V
CC
=
4.5 V
IOH = –24 mA 2 3.1
V
VCC = 4.75 V , IOH = –3 mA 2.7
IOL = 24 mA 0.35 0.5
VOLV
CC
= 4.5
V
IOL = 48 mA 0.35 0.5
V
I
I
VCC = 5.5 V, VI = 5.5 V 0.1 0.1 mA
Control inputs
20 20
I
IH
A or B port
V
CC
= 5.5 V,
V
I
= 2.7
V
20 20
µ
A
Control inputs
–0.2 –0.2
I
IL
A or B port
V
CC
= 5.5 V,
V
I
= 0.5
V
–0.2 –0.2
mA
I
IO(off)
§
VCC = 0, VO = 2.7 V 0.1 0.1 mA
I
OS
VCC = 5.5 V, VO = 0 –75 –250 –75 –250 mA
Outputs high 18 30 18 30
I
CC
VCC = 5.5 V
Outputs low 30 45 30 45
mA
Outputs disabled 6.5 12 6.5 12
C
i
VCC = 5 V, VI = 2.5 V or 0.5 V 6 6 pF
C
io
VCC = 5 V, VI = 2.5 V or 0.5 V 8 8 pF
All typical values are at VCC = 5 V, TA = 25°C.
For I/O ports, the parameters IIH and IIL include the off-state output current.
§
I
O(off)
= Power-off bus-leakage current
Not more than one output should be shorted at a time and duration of the short circuit should not exceed one second.
SN54BCT29863B, SN74BCT29863B 9-BIT BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
SCBS015D – NOVEMBER 1988 – REVISED NOVEMBER 1993
2–4
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
switching characteristics (see Note 2)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
VCC = 5 V, CL = 50 pF, R1 = 500 Ω, R2 = 500
,
TA = 25°C
VCC = 4.5 V to 5.5 V, CL = 50 pF, R1 = 500 Ω, R2 = 500
,
TA = MIN to MAX
UNIT
BCT29863B SN54BCT29863B SN74BCT29863B
MIN TYP MAX MIN MAX MIN MAX
t
PLH
1 3 4.5 1 5.4 1 5
t
PHL
A or B
B or A
2 4.8 6.8 2 7.9 2 7.5
ns
t
PZH
2 5.1 7 2 9.2 2 8.4
t
PZL
OEAB
or
OEBA
A or B
4.5 8.4 10.8 4.5 13.6 4.5 12.6
ns
t
PHZ
2 5 7.2 2 9.6 2 8.8
t
PLZ
OEAB
or
OEBA
A or B
1.7 4.7 6.7 1.7 9.1 1.7 8.1
ns
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
NOTE 2: Load circuits and voltage waveforms are shown in Section 1.
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICA TIONS IS UNDERSTOOD T O BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1998, Texas Instruments Incorporated
Loading...