Texas Instruments SN74ALVC04D, SN74ALVC04DGVR, SN74ALVC04DR, SN74ALVC04PWLE, SN74ALVC04PWR Datasheet
SN74ALVC04
HEX INVERTER
SCES117F – JULY 1997 – REVISED FEBRUARY 1999
D
EPIC
(Enhanced-Performance Implanted
CMOS) Submicron Process
D
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D
Latch-Up Performance Exceeds 250 mA Per
JESD 17
D
Package Options Include Plastic
Small-Outline (D), Thin Very Small-Outline
D, DGV, OR PW PACKAGE
(TOP VIEW)
1A
1
14
1Y
2
13
2A
3
12
2Y
4
11
3A
5
10
3Y
6
GND
7
(DGV), and Thin Shrink Small-Outline (PW)
Packages
description
This hex inverter contains six independent inverters designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVC04 performs the Boolean function Y = A
The SN74ALVC04 is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
(each inverter)
INPUT
A
H L
L H
.
OUTPUT
Y
V
CC
6A
6Y
5A
5Y
4A
9
4Y
8
logic symbol
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
†
1A
2A
3A
4A
5A
6A
1
3
5
9
11
13
1
logic diagram, each inverter (positive logic)
AY
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
10
12
2
1Y
4
2Y
6
3Y
8
4Y
5Y
6Y
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1999, Texas Instruments Incorporated
1
SN74ALVC04
IOHHigh-level output current
mA
IOLLow-level output current
mA
HEX INVERTER
SCES117F – JULY 1997 – REVISED FEBRUARY 1999
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
Input voltage range, V
Output voltage range, V
Input clamp current, I
Output clamp current, I
Continuous output current, I
Continuous current through V
Package thermal impedance, θ
–0.5 V to 4.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
(see Note 1) –0.5 V to 4.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I
(see Notes 1 and 2) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
(VI < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IK
(VO < 0) –50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OK
±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
or GND ±100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
(see Note 3): D package 127°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JA
†
DGV package 182°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 170°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. This value is limited to 4.6 V maximum.
3. The package thermal impedance is calculated in accordance with JESD 51.
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
recommended operating conditions (see Note 4)
MIN MAX UNIT
V
V
V
V
V
∆t/∆v Input transition rise or fall rate 5 ns/V
T
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Supply voltage 1.65 3.6 V
CC
VCC = 1.65 V to 1.95 V 0.65 × V
High-level input voltage
IH
Low-level input voltage
IL
Input voltage 0 V
I
Output voltage 0 V
O
p
p
Operating free-air temperature –40 85 °C
A
Implications of Slow or Floating CMOS Inputs
, literature number SCBA004.
VCC = 2.3 V to 2.7 V 1.7
VCC = 2.7 V to 3.6 V 2
VCC = 1.65 V to 1.95 V 0.35 × V
VCC = 2.3 V to 2.7 V
VCC = 2.7 V to 3.6 V 0.8
VCC = 1.65 V –4
VCC = 2.3 V –12
VCC = 2.7 V –12
VCC = 3 V –24
VCC = 1.65 V 4
VCC = 2.3 V 12
VCC = 2.7 V 12
VCC = 3 V 24
CC
0.7
CC
CC
V
CC
V
V
V
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
V
V
I
mA
(INPUT)
(OUTPUT)
PARAMETER
TEST CONDITIONS
UNIT
SN74ALVC04
HEX INVERTER
SCES117F – JULY 1997 – REVISED FEBRUARY 1999
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER TEST CONDITIONS
IOH = –100 µA 1.65 V to 3.6 V VCC–0.2
IOH = –4 mA 1.65 V 1.2
IOH = –6 mA 2.3 V 2
V
OH
IOH = –12 mA
IOH = –24 mA 3 V 2
IOL = 100 µA 1.65 V to 3.6 V 0.2
IOL = 4 mA 1.65 V 0.45
OL
I
I
I
CC
∆I
CC
C
†
All typical values are at VCC = 3.3 V, TA = 25°C.
i
IOL = 6 mA 2.3 V 0.4
= 12
OL
IOL = 24 mA 3 V 0.55
VI = VCC or GND 3.6 V ±5 µA
VI = VCC or GND, IO = 0 3.6 V 10 µA
One input at VCC – 0.6 V, Other inputs at VCC or GND 3 V to 3.6 V 750 µA
VI = VCC or GND 3.3 V 3.5 pF
V
CC
2.3 V 1.7
2.7 V 2.2
3 V 2.4
2.3 V 0.7
2.7 V 0.4
MIN TYP†MAX UNIT
V
switching characteristics over recommended operating free-air temperature range (unless
otherwise noted) (see Figures 1 through 3)
PARAMETER
t
pd
‡
This information was not available at the time of publication.
FROM
A
TO
Y
VCC = 1.8 V
TYP MIN MAX MIN MAX MIN MAX
‡
VCC = 2.5 V
± 0.2 V
1 3 3.3 1 2.8 ns
VCC = 2.7 V
VCC = 3.3 V
± 0.3 V
UNIT
operating characteristics, T
C
‡
This information was not available at the time of publication.
Power dissipation capacitance per inverter CL = 0, f = 10 MHz
pd
= 25°C
A
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V
TYP TYP TYP
‡
23 27.5 pF
3
Loading...