Texas Instruments SN74AHCT541DBLE, SN74AHCT541DBR, SN74AHCT541DW, SN74AHCT541DWR, SN74AHCT541N Datasheet
...
SN54AHCT541, SN74AHCT541
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS269M – DECEMBER 1995 – REVISED JANUARY 2000
D
EPIC
(Enhanced-Performance Implanted
CMOS) Process
D
Inputs Are TTL-Voltage Compatible
D
Latch-Up Performance Exceeds 250 mA Per
JESD 17
D
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D
Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), Thin Very Small-Outline (DGV), Thin
Shrink Small-Outline (PW), and Ceramic
Flat (W) Packages, Ceramic Chip Carriers
(FK), and Standard Plastic (N) and Ceramic
(J) DIPs
description
The ’AHCT541 octal buffers/drivers are ideal for
driving bus lines or buffer memory address
registers. These devices feature inputs and
outputs on opposite sides of the package to
facilitate printed circuit board layout.
The 3-state control gate is a 2-input AND gate with
active-low inputs so that if either output-enable
(OE1
or OE2) input is high, all corresponding
outputs are in the high-impedance state. The
outputs provide noninverted data when they are
not in the high-impedance state.
SN74AHCT541 . . . DB, DGV, DW, N, OR PW PACKAGE
SN54AHCT541 ...J OR W PACKAGE
(TOP VIEW)
Y8
20
19
18
17
16
15
14
13
12
11
V
CC
Y7
V
CC
OE2
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
18
17
16
15
14
Y6 OE2
Y1
Y2
Y3
Y4
Y5
OE1
1
A1
2
A2
3
A3
4
A4
5
A5
6
A6
7
A7
8
9
A8
GND
SN54AHCT541 . . . FK PACKAGE
10
(TOP VIEW)
A2A1OE1
A3
A4
A5
A6
A7
3212019
4
5
6
7
8
910111213
A8
GND
T o ensure the high-impedance state during power up or power down, OE should be tied to V
through a pullup
CC
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54AHCT541 is characterized for operation over the full military temperature range of –55°C to 125°C.
The SN74AHCT541 is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
(each buffer/driver)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
INPUTS
OE1 OE2 A
L L L L
L LH H
H XX Z
X H X Z
OUTPUT
Y
Copyright 2000, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
1
SN54AHCT541, SN74AHCT541
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS269M – DECEMBER 1995 – REVISED JANUARY 2000
logic symbol
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
†
OE1
OE2
A1
A2
A3
A4
A5
A6
A7
A8
1
19
2
3
4
5
6
7
8
9
&
EN
1
logic diagram (positive logic)
OE1
OE2
1
19
18
17
16
15
14
13
12
11
Y1
Y2
Y3
Y4
Y5
Y6
Y7
Y8
218
A1
To Seven Other Channels
Y1
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, V
Output voltage range, VO (see Note 1) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0) –20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VCC) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, IO (VO = 0 to VCC) ±25 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through V
Package thermal impedance, θJA (see Note 2): DB package 70°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
‡
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51.
(see Note 1) –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I
or GND ±75 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
DGV package 92°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DW package 58°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N package 69°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 83°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
‡
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
UNIT
PARAMETER
TEST CONDITIONS
V
UNIT
V
4.5 V
V
V
4.5 V
V
SN54AHCT541, SN74AHCT541
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS269M – DECEMBER 1995 – REVISED JANUARY 2000
recommended operating conditions (see Note 3)
SN54AHCT541 SN74AHCT541
MIN MAX MIN MAX
V
V
V
V
V
I
OH
I
OL
∆t/∆v Input transition rise or fall rate 20 20 ns/V
T
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
* On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V.
†
This is the increase in supply current for each input at one of the specified TTL voltage levels rather than 0 V or VCC.
Supply voltage 4.5 5.5 4.5 5.5 V
CC
High-level input voltage 2 2 V
IH
Low-level input voltage 0.8 0.8 V
IL
Input voltage 0 5.5 0 5.5 V
I
Output voltage 0 V
O
High-level output current –8 –8 mA
Low-level output current 8 8 mA
Operating free-air temperature –55 125 –40 85 °C
A
Implications of Slow or Floating CMOS Inputs
IOH = –50 mA
IOH = –8 mA
IOL = 50 mA
IOL = 8 mA
VI = VCC or GND 0 V to 5.5 V ±0.1 ±1* ±1
VO = VCC or GND 5.5 V ±0.25 ±2.5 ±2.5
VI = VCC or GND, IO = 0 5.5 V 4 40 40
One input at 3.4 V ,
†
Other inputs at VCC or GND
VI = VCC or GND 5 V 2 10 10 pF
VO = VCC or GND 5 V 4 pF
I
I
I
∆I
C
C
OH
OL
I
OZ
CC
CC
i
o
, literature number SCBA004.
CC
5.5 V 1.35 1.5 1.5 mA
TA = 25°C SN54AHCT541 SN74AHCT541
MIN TYP MAX MIN MAX MIN MAX
4.4 4.5 4.4 4.4
3.94 3.8 3.8
0.1 0.1 0.1
0.36 0.44 0.44
CC
0 V
CC
V
m
A
m
A
m
A
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
SN54AHCT541, SN74AHCT541
PARAMETER
UNIT
AYC
15 pF
ns
OE
Y
C
15 pF
ns
OE
Y
C
pF
ns
AYC
50 pF
ns
OE
Y
C
50 pF
ns
OE
Y
C
pF
ns
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS269M – DECEMBER 1995 – REVISED JANUARY 2000
switching characteristics over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
CC
FROM TO LOAD
(INPUT) (OUTPUT) CAPACITANCE
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
t
sk(o)
* On products compliant to MIL-PRF-38535, this parameter is not production tested.
** On products compliant to MIL-PRF-38535, this parameter does not apply.
CL = 50 pF 1** 1 ns
=
L
=
L
= 15
L
=
L
=
L
= 50
L
p
p
p
p
p
p
TA = 25°C SN54AHCT541 SN74AHCT541
MIN TYP MAX MIN MAX MIN MAX
4.1* 6* 1* 6.5* 1 6.5
3.7* 5.5* 1* 6.5* 1 6.5
5* 7* 1* 8* 1 8
5* 7* 1* 8* 1 8
4.5* 7* 1* 8* 1 8
4.5* 7* 1* 8* 1 8
6.2 8.5 1 9.5 1 9.5
6 8.5 1 9.5 1 9.5
7.5 10 1 12 1 12
7.5 10 1 12 1 12
7 10 1 12 1 12
7 10 1 12 1 12
operating characteristics, V
C
Power dissipation capacitance No load, f = 1 MHz 12 pF
pd
= 5 V, TA = 25°C
CC
PARAMETER TEST CONDITIONS TYP UNIT
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
From Output
Under Test
(see Note A)
SN54AHCT541, SN74AHCT541
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCLS269M – DECEMBER 1995 – REVISED JANUARY 2000
PARAMETER MEASUREMENT INFORMATION
V
Test
Point
C
L
From Output
Under Test
(see Note A)
C
L
RL = 1 kΩ
S1
CC
Open
GND
TEST S1
t
PLH/tPHL
t
PLZ/tPZL
t
PHZ/tPZH
Open Drain
Open
V
CC
GND
V
CC
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
t
w
Input
Input
In-Phase
Output
Out-of-Phase
Output
INVERTING AND NONINVERTING OUTPUTS
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
D. The outputs are measured one at a time with one input transition per measurement.
1.5 V 1.5 V
VOLTAGE WAVEFORMS
PULSE DURATION
t
PLH
50% V
t
PHL
50% V
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
3-STATE AND OPEN-DRAIN OUTPUTS
CC
CC
LOAD CIRCUIT FOR
3 V
0 V
3 V
0 V
t
PHL
V
t
PLH
CC
V
V
CC
V
OH
OL
OH
OL
50% V
50% V
Timing Input
Data Input
Output
Control
Output
Waveform 1
S1 at V
(see Note B)
Waveform 2
(see Note B)
CC
Output
S1 at GND
1.5 V
t
CC
CC
h
t
PLZ
VOL + 0.3 V
t
PHZ
VOH – 0.3 V
t
su
1.5 V 1.5 V
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
1.5 V 1.5 V1.5 V 1.5 V
t
PZL
50% V
t
PZH
50% V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
3 V
0 V
3 V
0 V
3 V
0 V
≈V
V
OL
V
OH
≈0 V
CC
Figure 1. Load Circuit and Voltage Waveforms
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICA TIONS USING SEMICONDUCT OR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated
Loading...