Texas Instruments SN74AHC245DBLE, SN74AHC245DBR, SN74AHC245DGVR, SN74AHC245DW, SN74AHC245DWR Datasheet
...
OPERATION
SN54AHC245, SN74AHC245
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCLS230G – OCTOBER 1995 – REVISED JANUARY 2000
D
EPIC
(Enhanced-Performance Implanted
CMOS) Process
D
Operating Range 2-V to 5.5-V V
D
Latch-Up Performance Exceeds 250 mA Per
CC
JESD 17
D
Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), Thin Very Small-Outline (DGV), Thin
Shrink Small-Outline (PW), and Ceramic
Flat (W) Packages, Ceramic Chip Carriers
(FK), and Standard Plastic (N) and Ceramic
(J) DIPs
description
The ’AHC245 octal bus transceivers are designed
for asynchronous two-way communication
between data buses. The control-function
implementation minimizes external timing
requirements.
These devices allow data transmission from the A
bus to the B bus or from the B bus to the A bus,
depending on the logic level at the
direction-control (DIR) input. The output-enable
(OE
) input can be used to disable the device so
that the buses are effectively isolated.
T o ensure the high-impedance state during power
up or power down, OE should be tied to V
through a pullup resistor; the minimum value of
the resistor is determined by the current-sinking
capability of the driver.
CC
SN74AHC245 . . . DB, DGV, DW, N, OR PW PACKAGE
SN54AHC245 ...J OR W PACKAGE
(TOP VIEW)
1
20
B8
19
18
17
16
15
14
13
12
11
V
B7
CC
V
OE
B1
B2
B3
B4
B5
B6
B7
B8
OE
18
17
16
15
14
B6
CC
B1
B2
B3
B4
B5
DIR
2
A1
3
A2
4
A3
5
A4
6
A5
7
A6
8
A7
9
A8
GND
SN54AHC245 . . . FK PACKAGE
10
(TOP VIEW)
A2A1DIR
A3
A4
A5
A6
A7
3212019
4
5
6
7
8
910111213
A8
GND
The SN54AHC245 is characterized for operation
over the full military temperature range of –55°C
to 125°C. The SN74AHC245 is characterized for
operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
FUNCTION TABLE
(each transceiver)
INPUTS
OE DIR
L L B data to A bus
L H A data to B bus
H X Isolation
Copyright 2000, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1
SN54AHC245, SN74AHC245
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCLS230G – OCTOBER 1995 – REVISED JANUARY 2000
logic symbol
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
†
OE
DIR
A1
A2
A3
A4
A5
A6
A7
A8
19
1
2
3
4
5
6
7
8
9
G3
3 EN1 [BA]
3 EN2 [AB]
1
2
logic diagram (positive logic)
1
DIR
18
17
16
15
14
13
12
11
B1
B2
B3
B4
B5
B6
B7
B8
A1
19
OE
2
18
B1
To Seven Other Channels
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
UNIT
mA
mA
∆t/∆vInput transition rise or fall rate
ns/V
SN54AHC245, SN74AHC245
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCLS230G – OCTOBER 1995 – REVISED JANUARY 2000
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
†
Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, V
Input clamp current, I
Output clamp current, I
(see Note 1) –0.5 V to V
O
(V
IK
I
OK
Continuous output current, I
< 0) –20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(V
< 0 or VO > VCC) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
(V
= 0 to VCC) ±25 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
O
CC
+ 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through VCC or GND ±75 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
(see Note 2): DB package 70°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JA
DGV package 92°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DW package 58°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N package 69°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 83°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51.
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
recommended operating conditions (see Note 3)
SN54AHC245 SN74AHC245
MIN MAX MIN MAX
V
V
V
V
V
I
OH
I
OL
T
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Supply voltage 2 5.5 2 5.5 V
CC
VCC = 2 V 1.5 1.5
High-level input voltage
IH
Low-level input voltage
IL
Input voltage OE or DIR 0 5.5 0 5.5 V
I
Output voltage A or B 0 V
O
High-level output current
Low-level output current
p
Operating free-air temperature –55 125 –40 85 °C
A
Implications of Slow or Floating CMOS Inputs
, literature number SCBA004.
VCC = 3 V
VCC = 5.5 V 3.85 3.85
VCC = 2 V 0.5 0.5
VCC = 3 V
VCC = 5.5 V 1.65 1.65
VCC = 2 V –50 –50
VCC = 3.3 V ± 0.3 V
VCC = 5 V ± 0.5 V –8 –8
VCC = 2 V 50 50
VCC = 3.3 V ± 0.3 V
VCC = 5 V ± 0.5 V 8 8
VCC = 3.3 V ± 0.3 V 100 100
VCC = 5 V ± 0.5 V 20 20
2.1 2.1
0.9 0.9
CC
–4 –4
4 4
0 V
CC
V
V
V
m
A
m
A
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
SN54AHC245, SN74AHC245
PARAMETER
TEST CONDITIONS
V
UNIT
OH
OL
I
V
V
GND
A
PARAMETER
UNIT
A or B
B or A
C
15 pF
ns
OE
A or B
C
pF
ns
OE
A or B
C
pF
ns
A or B
B or A
C
pF
ns
OE
A or B
C
pF
ns
OE
A or B
C
pF
ns
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCLS230G – OCTOBER 1995 – REVISED JANUARY 2000
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
CC
2 V 1.9 2 1.9 1.9
IOH = –50 mA
V
OH
IOH = –4 mA
IOH = –8 mA
IOL = 50 mA
V
OL
IOL = 4 mA
IOL = 8 mA
A or B inputs
I
OE or DIR
†
I
OZ
I
CC
C
OE or DIR
i
C
A or B inputs VI = VCC or GND 5 V 4 pF
io
* On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V.
†
The parameter IOZ includes the input leakage current.
=
or
I
CC
VO = VCC or GND,
VI (OE
) = VIL or V
VI = VCC or GND, IO = 0 5.5 V 4 40 40
VI = VCC or GND 5 V 2.5 10 10 pF
IH
3 V 2.9 3 2.9 2.9
4.5 V 4.4 4.5 4.4 4.4
3 V 2.58 2.48 2.48
4.5 V 3.94 3.8 3.8
2 V 0.1 0.1 0.1
3 V 0.1 0.1 0.1
4.5 V 0.1 0.1 0.1
3 V 0.36 0.5 0.44
4.5 V 0.36 0.5 0.44
5.5 V ±0.1 ±1 ±1
0 V to 5.5 V ±0.1 ±1* ±1
5.5 V ±0.25 ±2.5 ±2.5
TA = 25°C SN54AHC245 SN74AHC245
MIN TYP MAX MIN MAX MIN MAX
V
V
m
m
A
m
A
switching characteristics over recommended operating free-air temperature range,
= 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
V
CC
FROM TO LOAD
(INPUT) (OUTPUT) CAPACITANCE
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
t
sk(o)
** On products compliant to MIL-PRF-38535, this parameter is not production tested.
∗∗∗
On products compliant to MIL-PRF-38535, this parameter does not apply.
CL = 50 pF 1.5*** 1.5 ns
=
L
= 15
L
= 15
L
= 50
L
= 50
L
= 50
L
p
p
p
p
p
p
TA = 25°C SN54AHC245 SN74AHC245
MIN TYP MAX MIN MAX MIN MAX
5.8** 8.4** 1** 10** 1 10
5.8** 8.4** 1** 10** 1 10
8.5** 13.2** 1** 15.5** 1 15.5
8.5** 13.2** 1** 15.5** 1 15.5
8.9** 12.5** 1** 15.5** 1 15.5
8.9** 12.5** 1** 15.5** 1 15.5
8.3 11.9 1 13.5 1 13.5
8.3 11.9 1 13.5 1 13.5
11 16.7 1 19 1 19
11 16.7 1 19 1 19
11.5 15.8 1 18 1 18
11.5 15.8 1 18 1 18
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER
UNIT
A or B
B or A
C
15 pF
ns
OE
A or B
C
15 pF
ns
OE
A or B
C
pF
ns
A or B
B or A
C
50 pF
ns
OE
A or B
C
50 pF
ns
OE
A or B
C
pF
ns
PARAMETER
UNIT
SN54AHC245, SN74AHC245
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCLS230G – OCTOBER 1995 – REVISED JANUARY 2000
switching characteristics over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
CC
FROM TO LOAD
(INPUT) (OUTPUT) CAPACITANCE
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
t
PLH
t
PHL
t
PZH
t
PZL
t
PHZ
t
PLZ
t
sk(o)
∗
On products compliant to MIL-PRF-38535, this parameter is not production tested.
∗∗
On products compliant to MIL-PRF-38535, this parameter does not apply.
CL = 50 pF 1** 1 ns
=
L
=
L
= 15
L
=
L
=
L
= 50
L
p
p
p
p
p
p
TA = 25°C SN54AHC245 SN74AHC245
MIN TYP MAX MIN MAX MIN MAX
4* 5.5* 1* 6.5* 1 6.5
4* 5.5* 1* 6.5* 1 6.5
5.8* 8.5* 1* 10* 1 10
5.8* 8.5* 1* 10* 1 10
5.6* 7.8* 1* 9.2* 1 9.2
5.6* 7.8* 1* 9.2* 1 9.2
5.5 7.5 1 8.5 1 8.5
5.5 7.5 1 8.5 1 8.5
7.3 10.6 1 12 1 12
7.3 10.6 1 12 1 12
7 9.7 1 11 1 11
7 9.7 1 11 1 11
noise characteristics, V
V
OL(P)
V
OL(V)
V
OH(V)
V
IH(D)
V
IL(D)
NOTE 4: Characteristics are for surface-mount packages only.
Quiet output, maximum dynamic V
Quiet output, minimum dynamic V
Quiet output, minimum dynamic V
High-level dynamic input voltage 3.5 V
Low-level dynamic input voltage 1.5 V
operating characteristics, V
C
Power dissipation capacitance No load, f = 1 MHz 14 pF
pd
= 5 V, C
CC
CC
PARAMETER TEST CONDITIONS TYP UNIT
= 50 pF, TA = 25°C (see Note 4)
L
OL
OL
OH
= 5 V, TA = 25°C
SN74AHC245
MIN TYP MAX
0.9 V
–0.9 V
4.3 V
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
SN54AHC245, SN74AHC245
OCTAL BUS TRANSCEIVERS
WITH 3-STATE OUTPUTS
SCLS230G – OCTOBER 1995 – REVISED JANUARY 2000
PARAMETER MEASUREMENT INFORMATION
From Output
Under Test
(see Note A)
Test
Point
C
L
From Output
Under Test
(see Note A)
V
RL = 1 kΩ
C
L
S1
CC
Open
GND
TEST S1
t
PLH/tPHL
t
PLZ/tPZL
t
PHZ/tPZH
Open Drain
Open
V
CC
GND
V
CC
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
Input
Input
t
PLH
In-Phase
Output
t
PHL
Out-of-Phase
Output
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
t
w
50% V
CC
VOLTAGE WAVEFORMS
PULSE DURATION
50% V
CC
50% V
50% V
VOLTAGE WAVEFORMS
50% V
CC
CC
3-STATE AND OPEN-DRAIN OUTPUTS
50% V
LOAD CIRCUIT FOR
V
CC
CC
0 V
V
CC
CC
t
PHL
50% V
t
PLH
50% V
CC
CC
0 V
V
V
V
V
OH
OL
OH
OL
Timing Input
Data Input
Output
Control
Output
Waveform 1
S1 at V
(see Note B)
Output
Waveform 2
S1 at GND
(see Note B)
50% V
CC
t
su
50% V
CC
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
50% V
CC
t
PZL
50% V
50% V
CC
CC
CC
t
PZH
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
t
h
50% V
50% V
VOL + 0.3 V
VOH – 0.3 V
CC
t
t
CC
PLZ
PHZ
V
CC
0 V
V
CC
0 V
V
CC
0 V
≈V
V
OL
V
OH
≈0 V
CC
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
D. The outputs are measured one at a time with one input transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICA TIONS USING SEMICONDUCT OR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated
Loading...