Texas Instruments SN74AHC1G02DBVR, SN74AHC1G02DCKR Datasheet

SN74AHC1G02
SINGLE 2-INPUT POSITIVE-NOR GATE
SCLS342F – APRIL 1996 – REVISED JANUARY 2000
EPIC
(Enhanced-Performance Implanted
CMOS) Process
Operating Range 2-V to 5.5-V V
Package Options Include Plastic Small-Outline Transistor (DBV, DCK) Packages
CC
DBV OR DCK PACKAGE
(TOP VIEW)
V
5
Y
4
GND
A
1
B
2 3
CC
description
This device contains a single 2-input NOR gate that performs the Boolean function Y = ASB or Y = A + B in positive logic.
The SN74AHC1G02 is characterized for operation from –40°C to 85°C.
FUNCTION TABLE
logic symbol
INPUTS
A B
H X L X HL
L L H
1
A
2
B
1
OUTPUT
Y
4
Y
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram (positive logic)
1
A
2
B
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
4
Y
EPIC is a trademark of Texas Instruments Incorporated.
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright 2000, Texas Instruments Incorporated
1
SN74AHC1G02
mA
mA
t/∆vInput transition rise or fall rate
ns/V
SINGLE 2-INPUT POSITIVE-NOR GATE
SCLS342F – APRIL 1996 – REVISED JANUARY 2000
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, V
(see Note 1) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
Input clamp current, IIK (VI < 0) –20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VCC) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, IO (VO = 0 to VCC) ±25 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through VCC or GND ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
(see Note 2): DBV package 347°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JA
DCK package 389°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51.
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
recommended operating conditions (see Note 3)
MIN MAX UNIT
V
V
V
V V
I
OH
I
OL
T
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Supply voltage 2 5.5 V
CC
VCC = 2 V 1.5
High-level input voltage
IH
Low-level input voltage
IL
Input voltage 0 5.5 V
I
Output voltage 0 V
O
High-level output current
Low-level output current
p
Operating free-air temperature –40 85 °C
A
Implications of Slow or Floating CMOS Inputs
, literature number SCBA004.
VCC = 3 V VCC = 5.5 V 3.85 VCC = 2 V 0.5 VCC = 3 V VCC = 5.5 V 1.65
VCC = 2 V –50 VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V –8 VCC = 2 V 50 VCC = 3.3 V ± 0.3 V VCC = 5 V ± 0.5 V 8 VCC = 3.3 V ± 0.3 V 100 VCC = 5 V ± 0.5 V 20
2.1
0.9
CC
–4
V
V
V
m
A
m
A
4
2
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Loading...
+ 3 hidden pages