Datasheet SN74AHC158DGVR, SN74AHC158DR, SN74AHC158N, SN74AHC158PWLE, SN74AHC158PWR Datasheet (Texas Instruments)
...
SN54AHC158, SN74AHC158
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCLS346E – MAY 1996 – REVISED JANUAR Y 2000
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
EPIC
(Enhanced-Performance Implanted
CMOS) Process
D
Operating Range 2-V to 5.5-V V
CC
D
Latch-Up Performance Exceeds 250 mA Per
JESD 17
D
ESD Protection Exceeds 2000 V Per
MIL-STD-833, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D
Package Options Include Plastic
Small-Outline (D), Shrink Small-Outline
(DB), Thin Very Small-Outline (DGV), Thin
Shrink Small-Outline (PW), and Ceramic
Flat (W) Packages, Ceramic Chip Carriers
(FK), and Standard Plastic (N) and Ceramic
(J) DIPs
description
These quadruple 2-line to 1-line data
selectors/multiplexers are designed for 2-V to
5.5-V V
CC
operation.
The ’AHC158 devices feature a common strobe
(G
) input. When the strobe is high, all outputs are
high. When the strobe is low, a 4-bit word is
selected from one of two sources and is routed to
the four outputs. These devices provide inverted
data.
The SN54AHC158 is characterized for operation
over the full military temperature range of –55°C
to 125°C. The SN74AHC158 is characterized for
operation from –40°C to 85°C.
FUNCTION TABLE
(each data selector/multiplexer)
INPUTS
OUTPUT
G A/B A B
Y
H X X X H
L LLX H
L LHX L
L HXL H
L H X H L
Copyright 2000, Texas Instruments Incorporated
UNLESS OTHERWISE NOTED this document contains PRODUCTION
DATA information current as of publication date. Products conform to
specifications per the terms of Texas Instruments standard warranty.
Production processing does not necessarily include testing of all
parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC is a trademark of Texas Instruments Incorporated.
SN54AHC158 ...J OR W PACKAGE
SN74AHC158 . . . D, DB, DGV, N, OR PW PACKAGE
(TOP VIEW)
3 2 1 20 19
910111213
4
5
6
7
8
18
17
16
15
14
4A
4B
NC
4Y
3A
1B
1Y
NC
2A
2B
SN54AHC158 . . . FK PACKAGE
(TOP VIEW)
1A
A/B
NC
3Y
3B
V
G
2Y
GND
NC
CC
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
A/B
1A
1B
1Y
2A
2B
2Y
GND
V
CC
G
4A
4B
4Y
3A
3B
3Y
NC – No internal connection
SN54AHC158, SN74AHC158
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCLS346E – MAY 1996 – REVISED JANUAR Y 2000
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
logic symbol
†
G
MUX
2
1A
1
3
1B
EN
15
G1
1
1Y
4
5
2A
6
2B
2Y
7
11
3A
10
3B
3Y
9
14
4A
13
4B
4Y
12
A/B
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
Pin numbers shown are for the D, DB, DGV , J, N, PW, and W packages.
1
logic diagram (positive logic)
2
3
5
6
11
10
14
13
15
1
G
A/B
4B
4A
3B
3A
2B
2A
1B
1A
4
7
9
12
1Y
2Y
3Y
4Y
Pin numbers shown are for the D, DB, DGV, J, N, PW, and W packages.
SN54AHC158, SN74AHC158
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCLS346E – MAY 1996 – REVISED JANUAR Y 2000
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
†
Supply voltage range, VCC –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage range, VI (see Note 1) –0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output voltage range, V
O
(see Note 1) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input clamp current, IIK (VI < 0) –20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output clamp current, IOK (VO < 0 or VO > VCC) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous output current, IO (VO = 0 to VCC) ±25 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous current through VCC or GND ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Package thermal impedance, θ
JA
(see Note 2): D package 73°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DB package 82°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DGV package 120°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N package 67°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PW package 108°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
stg
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51.
recommended operating conditions (see Note 3)
SN54AHC158 SN74AHC158
MIN MAX MIN MAX
UNIT
V
CC
Supply voltage 2 5.5 2 5.5 V
VCC = 2 V 1.5 1.5
V
IH
High-level input voltage
VCC = 3 V
2.1 2.1
V
VCC = 5.5 V 3.85 3.85
VCC = 2 V 0.5 0.5
V
IL
Low-level input voltage
VCC = 3 V
0.9 0.9
V
VCC = 5.5 V 1.65 1.65
V
I
Input voltage 0 5.5 0 5.5 V
V
O
Output voltage 0 V
CC
0 V
CC
V
VCC = 2 V –50 –50
m
A
I
OH
High-level output current
VCC = 3.3 V ± 0.3 V
–4 –4
VCC = 5 V ± 0.5 V –8 –8
mA
VCC = 2 V 50 50
m
A
I
OL
Low-level output current
VCC = 3.3 V ± 0.3 V
4 4
VCC = 5 V ± 0.5 V 8 8
mA
p
VCC = 3.3 V ± 0.3 V 100 100
∆t/∆vInput transition rise or fall rate
VCC = 5 V ± 0.5 V 20 20
ns/V
T
A
Operating free-air temperature –55 125 –40 85 °C
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs
, literature number SCBA004.
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
SN54AHC158, SN74AHC158
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCLS346E – MAY 1996 – REVISED JANUAR Y 2000
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
TA = 25°C SN54AHC158 SN74AHC158
PARAMETER
TEST CONDITIONS
V
CC
MIN TYP MAX MIN MAX MIN MAX
UNIT
2 V 1.9 2 1.9 1.9
IOH = –50 mA
3 V 2.9 3 2.9 2.9
V
OH
4.5 V 4.4 4.5 4.4 4.4
V
OH
IOH = –4 mA
3 V 2.58 2.48 2.48
IOH = –8 mA
4.5 V 3.94 3.8 3.8
2 V 0.1 0.1 0.1
IOL = 50 mA
3 V 0.1 0.1 0.1
V
OL
4.5 V 0.1 0.1 0.1
V
OL
IOL = 4 mA
3 V 0.36 0.5 0.44
IOL = 8 mA
4.5 V 0.36 0.5 0.44
I
I
A or B inputs VI = VCC or GND 0 V to 5.5 V ±0.1 ±1* ±1
m
A
I
CC
VI = VCC or GND, IO = 0 5.5 V 4 40 40
m
A
C
i
VI = VCC or GND 5 V 2 10 10 pF
* On products compliant to MIL-PRF-38535, this parameter is not production tested at VCC = 0 V.
switching characteristics over recommended operating free-air temperature range,
V
CC
= 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1)
FROM TO LOAD
TA = 25°C SN54AHC158 SN74AHC158
PARAMETER
(INPUT) (OUTPUT) CAPACITANCE
MIN TYP MAX MIN MAX MIN MAX
UNIT
t
PLH
p
6.2** 9.7** 1** 11.5** 1 11.5
t
PHL
A or B
Y
C
L
=
15 pF
6.2** 9.7** 1** 11.5** 1 11.5
ns
t
PLH
p
8.4** 13.2** 1** 15.5** 1 15.5
t
PHL
A/B
Y
C
L
= 15
pF
8.4** 13.2** 1** 15.5** 1 15.5
ns
t
PLH
p
8.7** 13.6** 1** 16** 1 16
t
PHL
G
Y
C
L
= 15
pF
8.7** 13.6** 1** 16** 1 16
ns
t
PLH
p
8.7 13.2 1 15 1 15
t
PHL
A or B
Y
C
L
= 50
pF
8.7 13.2 1 15 1 15
ns
t
PLH
p
10.9 16.7 1 19 1 19
t
PHL
A/B
Y
C
L
=
50 pF
10.9 16.7 1 19 1 19
ns
t
PLH
p
11.2 17.1 1 19.5 1 19.5
t
PHL
G
Y
C
L
= 50
pF
11.2 17.1 1 19.5 1 19.5
ns
** On products compliant to MIL-PRF-38535, this parameter is not production tested.
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
SN54AHC158, SN74AHC158
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCLS346E – MAY 1996 – REVISED JANUAR Y 2000
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics over recommended operating free-air temperature range,
V
CC
= 5 V ± 0.5 V (unless otherwise noted) (see Figure 1)
FROM TO LOAD
TA = 25°C SN54AHC158 SN74AHC158
PARAMETER
(INPUT) (OUTPUT) CAPACITANCE
MIN TYP MAX MIN MAX MIN MAX
UNIT
t
PLH
p
4.1* 6.4* 1* 7.5* 1 7.5
t
PHL
A or B
Y
C
L
=
15 pF
4.1* 6.4* 1* 7.5* 1 7.5
ns
t
PLH
p
5.3* 8.1* 1* 9.5* 1 9.5
t
PHL
A/B
Y
C
L
=
15 pF
5.3* 8.1* 1* 9.5* 1 9.5
ns
t
PLH
p
5.6* 8.6* 1* 10* 1 10
t
PHL
G
Y
C
L
= 15
pF
5.6* 8.6* 1* 10* 1 10
ns
t
PLH
p
5.6 8.4 1 9.5 1 9.5
t
PHL
A or B
Y
C
L
= 50
pF
5.6 8.4 1 9.5 1 9.5
ns
t
PLH
p
6.8 10.1 1 11.5 1 11.5
t
PLH
A/B
Y
C
L
= 50
pF
6.8 10.1 1 11.5 1 11.5
ns
t
PLH
p
7.1 10.6 1 12 1 12
t
PHL
G
Y
C
L
= 50
pF
7.1 10.6 1 12 1 12
ns
* On products compliant to MIL-PRF-38535, this parameter is not production tested.
noise characteristics V
CC
= 5 V, C
L
= 50 pF, TA = 25°C (see Note 4)
SN74AHC158
PARAMETER
MIN TYP MAX
UNIT
V
OL(P)
Quiet output, maximum dynamic V
OL
0.8 V
V
OL(V)
Quiet output, minimum dynamic V
OL
–0.8 V
V
OH(V)
Quiet output, minimum dynamic V
OH
4.8 V
V
IH(D)
High-level dynamic input voltage 3.5 V
V
IL(D)
Low-level dynamic input voltage 1.5 V
NOTE 4: Characteristics are for surface-mount packages only.
operating characteristics, V
CC
= 5 V, T
A
= 25°C
PARAMETER TEST CONDITIONS TYP UNIT
C
pd
Power dissipation capacitance No load, f = 1 MHz 11 pF
PRODUCT PREVIEW information concerns products in the formative or
design phase of development. Characteristic data and other
specifications are design goals. Texas Instruments reserves the right to
change or discontinue these products without notice.
SN54AHC158, SN74AHC158
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCLS346E – MAY 1996 – REVISED JANUAR Y 2000
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PARAMETER MEASUREMENT INFORMATION
50% V
CC
V
CC
V
CC
0 V
0 V
t
h
t
su
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
Data Input
t
PLH
t
PHL
t
PHL
t
PLH
V
OH
V
OH
V
OL
V
OL
V
CC
0 V
50% V
CC
50% V
CC
Input
Out-of-Phase
Output
In-Phase
Output
Timing Input
50% V
CC
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
Output
Control
Output
Waveform 1
S1 at V
CC
(see Note B)
Output
Waveform 2
S1 at GND
(see Note B)
V
OL
V
OH
t
PZL
t
PZH
t
PLZ
t
PHZ
≈V
CC
0 V
50% V
CC
VOL + 0.3 V
50% V
CC
≈0 V
V
CC
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
t
PLH/tPHL
t
PLZ/tPZL
t
PHZ/tPZH
Open Drain
Open
V
CC
GND
V
CC
TEST S1
V
CC
0 V
50% V
CC
t
w
VOLTAGE WAVEFORMS
PULSE DURATION
Input
NOTES: A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns.
D. The outputs are measured one at a time with one input transition per measurement.
From Output
Under Test
C
L
(see Note A)
LOAD CIRCUIT FOR
3-STATE AND OPEN-DRAIN OUTPUTS
S1
V
CC
RL = 1 kΩ
GND
From Output
Under Test
C
L
(see Note A)
Test
Point
LOAD CIRCUIT FOR
TOTEM-POLE OUTPUTS
Open
50% V
CC
50% V
CC
50% V
CC
50% V
CC
50% V
CC
50% V
CC
50% V
CC
50% V
CC
VOH – 0.3 V
Figure 1. Load Circuit and Voltage Waveforms
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICA TIONS IS UNDERSTOOD T O
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 2000, Texas Instruments Incorporated
Loading...