Datasheet SN54F153J Datasheet (Texas Instruments)

SN54F153, SN74F153

DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993

Copyright  1993, Texas Instruments Incorporated

2–1

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

• Permits Multiplexing From N Lines to

One Line

• Performs Parallel-to-Serial Conversion

• Strobe (Enable) Line Provided for

Cascading (N Lines to N Lines)

• Package Options Include Plastic

Small-Outline Packages, Ceramic Chip
Carriers, and Standard Plastic and Ceramic
300-mil DIPs

description

These data selectors/multiplexers contain
inverters and drivers to supply full binary decoding
data selection to the AND-OR gates. Separate
strobe (G

) inputs are provided for each of the two

4-line sections.
The SN54F153 is characterized for operation over

the full military temperature range of –55°C to
125°C. The SN74F153 is characterized for
operation from 0°C to 70°C.

FUNCTION TABLE

INPUTS

SELECT DATA

STROBE

OUTPUT

B A C0 C1 C2 C3

G

Y

X X X X X X H L
L LLXXX L L
LLHXXX L H
LHXLXX L L
LHXHXX L H
HLXXLX L L
HLXXHX L H
HHXXXL L L
HHXXXH L H

Select inputs A and B are common to both sections.

SN54F153 ...J PACKAGE

SN74F153 ...D OR N PACKAGE

(TOP VIEW)

3212019

910111213

4
5
6
7
8

18
17
16
15
14

A
2C3
NC
2C2
2C1

1C3
1C2

NC
1C1
1C0

SN54F153 . . . FK PACKAGE

(TOP VIEW)

B1GNC

2Y

2C0

2G

1Y

GND

NC

NC – No internal connection

V

CC

1
2
3
4
5
6
7
8

16
15
14
13
12
11
10

9

1G

B
1C3
1C2
1C1
1C0

1Y

GND

V

CC

2G
A
2C3
2C2
2C1
2C0
2Y

PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.

SN54F153, SN74F153
DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDFS052A – D2932, MARCH 1987 – REVISED OCT OBER 1993

2–2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

logic symbol

†

G

MUX

0
3

0

14

A

1

2

B

EN

1

15

1Y

7

0

6

1C0

1

5

1C1

2

4

1C2

3

3

1C3

10

2C0

11

2C1

12

2C2

13

2C3

2Y

9

1G

2G

†

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

Pin numbers shown are for the D, J, and N packages.

SN54F153, SN74F153

DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993

2–3

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

logic diagram (positive logic)

Data 2

Select

Data 1

2G

2C3

2C2

2C1

2C0

A

B

1C3

1C2

1C1

1C0

1G

2Y

1Y

1

6

5

4

3

2

14

10

11

12

13

15

7

9

Pin numbers shown are for the D, J, and N packages.

SN54F153, SN74F153
DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDFS052A – D2932, MARCH 1987 – REVISED OCT OBER 1993

2–4

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

†

Supply voltage range, V

CC

–0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range (see Note 1) –1.2 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input current range –30 mA to 5 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Voltage range applied to any output in the high state –0.5 V to V

CC

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Current into any output in the low state 40 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Operating free-air temperature range: SN54F153 –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SN74F153 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

†

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTE 1: The input voltage rating may be exceeded provided that the input current rating is observed.

recommended operating conditions

SN54F153 SN74F153

MIN NOM MAX MIN NOM MAX

UNIT

V

CC

Supply voltage 4.5 5 5.5 4.5 5 5.5 V

V

IH

High-level input voltage 2 2 V

V

IL

Low-level input voltage 0.8 0.8 V

I

IK

Input clamp current –18 –18 mA

I

OH

High-level output current –1 –1 mA

I

OL

Low-level output current 20 20 mA

T

A

Operating free-air temperature –55 125 0 70 °C

electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)

SN54F153 SN74F153

PARAMETER

TEST CONDITIONS

MIN TYP‡MAX MIN TYP‡MAX

UNIT

V

IK

VCC = 4.5 V, II = –18 mA –1.2 –1.2 V
VCC = 4.5 V, IOH = – 1 mA 2.5 3.4 2.5 3.4

V

OH

VCC = 4.75 V , IOH = – 1 mA 2.7

V

V

OL

VCC = 4.5 V, IOL = 20 mA 0.3 0.5 0.3 0.5 V

I

I

VCC = 5.5 V, VI = 7 V 0.1 0.1 mA

I

IH

VCC = 5.5 V, VI = 2.7 V 20 20 µA

I

IL

VCC = 5.5 V, VI = 0.5 V – 0.6 – 0.6 mA

I

OS

§

VCC = 5.5 V, VO = 0 –60 –150 –60 –150 mA

I

CC

VCC = 5.5 V, VI = 0 12 20 12 20 mA

‡

All typical values are at VCC = 5 V, TA = 25°C.

§

Not more than one output should be shorted at a time, and the duration of the short circuit should not exceed one second.

SN54F153, SN74F153

DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDFS052A – D2932, MARCH 1987 – REVISED OCTOBER 1993

2–5

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

switching characteristics (see Note 2)

PARAMETER

FROM

(INPUT)

TO

(OUTPUT)

VCC = 5 V,
CL = 50 pF,
RL = 500 Ω,
TA = 25°C

VCC = 4.5 V to 5.5 V,
CL = 50 pF,
RL = 500Ω,
TA = MIN to MAX

†

UNIT

()

()

′F153 SN54F153 SN74F153

MIN TYP MAX MIN MAX MIN MAX

t

PLH

3.7 7.7 10.5 3.7 14 3.7 12

t

PHL

A or B

Y

2.7 6.6 9 2.7 11 2.7 10.5

ns

t

PLH

3.7 6.7 9 3.7 11.5 3.7 10.5

t

PHL

G

Y

2.2 5.3 7 1.7 9 1.7 8

ns

t

PLH

2.2 4.9 7 1.7 9 2.2 8

t

PHL

C

Y

2.2 4.7 6.5 1.7 8 1.7 7.5

ns

†

For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.

NOTE 2: Load circuits and voltage waveforms are shown in Section 1.

SN54F153, SN74F153
DUAL 1-OF-4 DATA SELECTORS/MULTIPLEXERS

SDFS052A – D2932, MARCH 1987 – REVISED OCT OBER 1993

2–6

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

IMPORTANT NOTICE

T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.

TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.

CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICA TIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.

In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.

TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

Copyright  1998, Texas Instruments Incorporated