TEXAS INSTRUMENTS RI-ANT-G01E Technical data

www.ti.com

查询RI-ANT-S01C-00供应商

FEATURES APPLICATIONS

• Best in Class Performance Through Patented

HDX Technology

• Protection Class IP 65 and Higher (Exception:

RI-ANTG04E)

• 6 Form Factors available

• Proven in Harsh Industrial Environments

• Easy to Install and Use

RI-ANT-G01E , RI-ANT-G02E , RI-ANT-G04E

RI-ANT-S01C , RI-ANT-S02C , RI-ANT-P02A

SCBS845 – MARCH 2002

SERIES 2000 ANTENNAS

• Access Control

• Vehicle Identification

• Container Tracking

• Asset Management

• Waste Management

DESCRIPTION

These antenna products connect to Radio Frequency Modules (RFM) and reader/writers to form the interface to
the low frequency (LF) 134.2 kHz Texas Instruments transponders. In combination with a reader/writer they
transmit energy and signals to the transponder and receive the response from the tag. There are three standard
gate antennas (small, medium and large), two standard stick antennas with 1 or 3 meter cable length and a stick
antenna specially designed for use with the Mini-RFM available for usage in low frequency systems. Each
antenna is capable of creating a specific size and shape of read zone to meet the requirements of the target
application. In general the gate antennas create a large read zone including greater read distance, while the
stick antennas provide a more focused read zone and an ability to discriminate between transponders.

The antennas are well suited for usage in a broad range of applications including, but not limited to, access
control, vehicle identification, container tracking, asset management and waste management applications.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.

Copyright © 2002, Texas Instruments Incorporated

www.ti.com

RI-ANT-G01E , RI-ANT-G02E , RI-ANT-G04E
RI-ANT-S01C , RI-ANT-S02C , RI-ANT-P02A

SCBS845 – MARCH 2002

GATE ANTENNAS – SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range (unless otherwise noted)

RI-ANT-G01E RI-ANT-G02E RI-ANT-G04E UNIT

Operating Temperature –30 to +60 –30 to +60 –30 to +60 ° C
Storage Temperature –40 to +70 –40 to +70 –40 to +70 ° C

OPERATING CHARACTERISTICS

over operating free-air temperature range (unless otherwise noted)

PARAMETER UNIT

Inductance Typically 27 µ H @ 134.2 Typically 27 µ H @ 134.2 Typically 26 µ H @ 134.2 kHz
Protection Class IP 65 IP 65 IP 44
Vibration Mil-Std-810E, Test 514.4 (Category 1, Procedure 1; Basic transportation)
Case Material UVSHIPS (UV Stabilized High Impact Polystyrol)

Dimensions (mm) 715 ± 5 × 270 ± 3 × 25 ± 1 200 ± 3 × 200 ± 3 × 25 ± 1
Weight Typically 745 Typically 425 Typically 2500 g

Cable Length 1 1 — m
Connection Terminals Spade/Tongue, stud hole 3.5 mm, width 7.5 mm

Mounting Suitable for pole or wall

RI-ANT-G01E RI-ANT-G02E RI-ANT-G04E

Use non-metallic clamps, standard screws and washers
through 6.5mm pre-drilled holes, so that the screw hole is
flush with the mounting. Mounting material is not supplied
with the antenna.

PART NUMBER

1018 ± 5 × 518 ± 5 × 47 ±
5

1/4 inch push-on
(automotive type)

2

Submit Documentation Feedback