TEXAS INSTRUMENTS PTH08T230W Technical data

www.ti.com
查询PTH08T230W供应商
6-A, 4.5-V to 14-V INPUT, NON-ISOLATED,
WIDE-OUTPUT, ADJUSTABLE POWER MODULE WITH TurboTrans™
FEATURES
Up to 6-A Output Current On/Off Inhibit
4.5-V to 14-V Input Voltage
Wide-Output Voltage Adjust (0.7 V to 5.5 V)
± 1.5% Total Output Voltage Variation
Efficiencies up to 96%
Output Overcurrent Protection
(Nonlatching, Auto-Reset)
Operating Temperature: –40 ° C to 85 ° C
Safety Agency Approvals:
UL 1950, CSA 22.2 950, EN60950 VDE
(Pending)
Prebias Startup
Differential Output Voltage Remote Sense
Adjustable Undervoltage Lockout
TurboTrans™ Technology
SmartSync Technology
Auto-Track™ Sequencing
APPLICATIONS
Complex Multi-Voltage Systems
Microprocessors
Bus Drivers
PTH08T230W
DESCRIPTION
The PTH08T230W is a high-performance 6-A rated, non-isolated power module. This regulator represents the
nd
2
generation of the popular PTH series of power modules.
Operating from an input voltage range of 4.5 V to 14 V, the PTH08T230W requires a single resistor to set the output voltage to any value over the range, 0.7 V to 5.5 V. The wide input voltage range makes the PTH08T230W particularly suitable for advanced computing and server applications that utilize a loosely regulated 8-V to 12-V intermediate distribution bus. Additionally, the wide input voltage range increases design flexibility by supporting operation with tightly regulated 5-V, 8-V, or 12-V intermediate bus architectures.
The module incorporates a comprehensive list of features. Output over-current and over-temperature shutdown protects against most load faults. A differential remote sense ensures tight load regulation. An adjustable under-voltage lockout allows the turn-on voltage threshold to be customized. Auto-Track™ sequencing is a popular feature that greatly simplifies the simultaneous power-up and power-down of multiple modules in a power system.
The PTH08T230W includes new patent pending technologies, TurboTrans™ and SmartSync. The TurboTrans feature optimizes the transient response of the regulator while simultaneously reducing the quantity of external output capacitors required to meet a target voltage deviation specification. Additionally, for a target output capacitor bank, TurboTrans can be used to significantly improve the regulators transient response by reducing the peak voltage deviation. SmartSync allows for switching frequency synchronization of multiple modules, thus simplifying EMI noise suppression tasks and/or reducing input capacitor RMS current requirements.
The module uses double-sided surface mount construction to provide a low profile and compact footprint. Package options include both through-hole and surface mount configurations that are lead (Pb) - free and RoHS compatible.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TurboTrans, Auto-Track, POLA, TMS320 are trademarks of Texas Instruments.
PRODUCT PREVIEW information concerns products in the formative or design phase of development. Characteristic data and other specifications are design goals. Texas Instruments reserves the right to change or discontinue these products without notice.
Copyright © 2005, Texas Instruments Incorporated
www.ti.com
PRODUCT PREVIEW
1
10
PTH08T230W
(Top View)
9
7
6
5
43
82
PTH08T230W
SLTS265 – NOVEMBER 2005
ENVIRONMENTAL AND ABSOLUTE MAXIMUM RATINGS
(Voltages are with respect to GND)
V T
T
T
T
(1) During reflow of surface mount package version do not elevate peak temperature of the module, pins or internal components above the
Input voltage Track –0.3 to VI+ 0.3 V
I
Operating temperature range Over Virange –40 to 85
A
Wave soldering temperature PTH08T230WAD
wave
Solder reflow temperature Surface temperature of module body or pins
reflow
Storage temperature –40 to 125
stg
Mechanical shock Per Mil-STD-883D, Method 2002.3 1 mssec, 1/2 sine, mounted TBD
Mechanical vibration Mil-STD-883D, Method 2007.2 20-2000 Hz
Weight TBD grams Flammability Meets UL94V-O
stated maximum.
Surace temperature of module body or pins for 260 5 seconds maximum.
PTH08T230WAS 235 PTH08T230WAZ 260
Suffix AH TBD G
Suffix AS and AZ TBD
(1) (1)
UNIT
° C
2
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty . Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
Copyright © Each Manufacturing Company.
All Datasheets cannot be modified without permission.
This datasheet has been download from :
www.AllDataSheet.com
100% Free DataSheet Search Site.
Free Download.
No Register.
Fast Search System.
www.AllDataSheet.com
Loading...