For assistance or to order, call (800) 531-5782
Revised 3/1/99
PT4100 Series
48V
48V 15 WATT ISOLATED
DC-DC CONVERTER
• -40°C to +85°C Operating
Temperature Range
• 1500 VDC Isolation
• Power Density 15 Watts/in
• Wide Input Voltage Range
36V to 75V
• 82% Efficiency
• Small Footprint
• Fast Transient Response
• UL Approved
3
48V DC-DC Converters advance the state-ofthe-art for board-mounted converters by
employing high switching frequencies greater
than 650 KHz and planar magnetics and surface-mount construction. They feature the
industry’s smallest footprint, a power density of
15 Watts/in
They are designed for Telecom, Industrial,
Computer, Medical, and other distributed
power applications requiring input-to-output
isolation and an industrial temperature range.
Specifications
Characteristics
(Ta=25°C unless noted) Symbols Conditions Min Typ Max Units
Output Current I
Current Limit I
On/Off Standby Current I
Short Circuit Current I
Inrush Current I
Input Voltage Range V
Output Voltage Tolerance ∆V
Ripple Rejection RR Over Vin range @ 120 Hz — 60 — dB
Line Regulation Reg
Load Regulation Reg
Vo Ripple/Noise V
Transient Response t
Efficiency η Vin=48V, Io=3.0A, Vo=5V — 80 — %
Switching Frequency ƒ
Recommended Operating T
Temperature Range Free air convection, (40-60LFM)
Thermal Resistance θ
Case Temperature T
Storage Temperature T
Mechanical Shock — Per Mil-STD-202F, Method 213B,
Mechanical Vibration — Per Mil-STD-202F, Method 204D,
Weight — — — 28 — grams
Isolation — — 1500 — — V
Capacitance — — — 1100 — pF
Resistance — — 10 — — MΩ
Flammability — Materials meet UL 94V-0
Remote On/Off On Open or 2.5 to 7.0 VDC above -V
* See thermal derating curves
o
cl
in standby
sc
ir
t
ir
in
n
tr
o
a
ja
c
s
Off Short or 0 to 0.8 VDC above -V
Over Vin range Vo = 3.3V 0 — 4.0 A
Vin = 36V Vo = 5V — 4.00 — A
Vin = 48V, Pin 1 = -V
Vin = 48V Vo = 5V — 5.5 — A
Vin = 48V @ max I
On start-up — 1.0 5.0 mSec
Io = 0.1 to max I
Over Vin Range
o
TA= -40°C to +85°C
Over Vin range @ max I
line
10% to 100% of Io max — ±0.4 ±1.0 %V
load
Vin=48V, Io=3.0A, Vo=5V — 75 100 mV
Vin=48V, Io=1.25A, Vo=12V — 120 150 mV
Vin=48V, Io=1.0A, Vo=15V — 100 200 mV
50% load change — 100 200 µSec
Vo over/undershoot — 3.0 5.0 %V
V
=48V, Io=1.25A, Vo=12V — 81 — %
in
Vin=48V, Io=1A, Vo=15V — 82 — %
Over Vin and Io, Vo=5V 800 850 900 kHz
Vo=12V/15V 600 650 700 kHz
Vin = 48V @ max I
200 LFM PT4110 0 — +70 °C
Free Air Convection, (40-60LFM) — 14 — °C/W
@ Thermal shutdown — — 100 °C
— -40 — 110 °C
6mS, Half-sine, mounted to a PCB
10-500Hz, Soldered in a PCB
V
= 5V 0 — 3.0 A
o
= 12V 0 — 1.25 A
V
o
Vo = 15V 0 — 1.0 A
= 12V — 1.75 — A
V
o
Vo = 15V — 1.4 — A
in
= 12V — 3.5 — A
V
o
Vo = 15V — 2.0 — A
o
o
o
o
PT4100 SERIES
— 7 10 mA
— 0.6 1.0 A
36.0 48.0 75.0 V
— ±1.0 ±2.0 %V
— ±0.2 ±1.0 %V
-40 — +85* °C
—50—G’s
—10—G’s
in
in
Application Notes
Mechanical Outline
Product Selector Guide
Power Trends’ PT4100 series of Isolated
3
, and operate at 82% efficiency.
Standard Application
On/Off
+Vin
1
+Vout
PT4100
5
-Vout-Vin
3
24
Pin-Out Information
Pin Function
Remote
1
ON/OFF
2-V
3+V
4-V
o
o
o
pp
pp
pp
o
5+V
6 Do not connect
Ordering Information
Through-Hole
PT4101A = 5 Volts
PT4102A = 12 Volts
PT4103A = 15 Volts
PT4110A = 3.3 Volts
PT4117A = 5.2 Volts
Surface Mount
PT4101C = 5 Volts
PT4102C = 12 Volts
PT4103C = 15 Volts
PT4110C = 3.3 Volts
PT4117C = 5.2 Volts
(For dimensions and PC
board layout, see Package
Style 700.)
in
in
out
out
70
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com
˝
For assistance or to order, call (800) 531-5782
˝
˝
PT4100 Series
CHARACTERISTIC DATA
PT4101, 5.0 VDC (See Note 1)
Efficiency vs Output Current Efficiency vs Output Current Efficiency vs Output Current
100
90
80
70
60
Efficiency - %Ripple-(mV)Iout-(Amps)PD-(Watts)
50
40
00.511.522.53
Ripple vs Output Current Ripple vs Output Current Ripple vs Output Current
120
100
80
60
40
20
0
0 0.5 1 1.5 2 2.5 3
Iout-(Amps) Iout-(Amps)
Vin
36V
48V
60V
72V
Vin
72V
60V
48V
36V
PT4102, 12.0 VDC (See Note 1) PT4103, 15.0 VDC (See Note 1)
100
90
80
70
60
Efficiency - %
50
40
0.25 0.5 0.75 1 1.25
Iout-(Amps) Iout-(Amps)Iout-(Amps)
120
100
80
60
Ripple-(mV)
40
20
0
0.25 0.5 0.75 1 1.25
Iout-(Amps)
Vin
36V
48V
60V
72V
Vin
72V
60V
48V
36V
100
90
80
70
Efficiency - %
60
50
40
0.25 0.5 0.75 1
120
100
80
60
Ripple-(mV)Iout-(Amps)
40
20
0
0.25 0.5 0.75 1
48V
DATA SHEETS
48V Bus Products
Vin
36V
48V
60V
72V
Vin
72V
60V
48V
36V
Thermal Derating (Ta) (See Note 2) Thermal Derating (Ta) (See Note 2) Thermal Derating (Ta) (See Note 2)
3
2.5
2
1.5
1
0.5
0
36 40 44 48 52 56 60 64 68 72
70°
85°
1.25
1
0.75
0.5
Iout-(Amps)
0.25
0
36 40 44 48 52 56 60 64 68 72
70°
85°
1
0.75
0.5
0.25
0
36 40 44 48 52 56 60 64 68 72
85°
Vin-(Volts) Vin-(Volts)Vin-(Volts)
Power Dissipation vs Output Current Power Dissipation vs Output Current Power Dissipation vs Output Current
5
4
3
2
1
0
00.511.522.53
Iout-(Amps)
5
Vin
72V
60V
48V
36V
4
3
PD-(Watts)
2
1
0
0.25 0.5 0.75 1 1.25
Vin
72V
60V
48V
36V
Iout-(Amps)
5
4
3
2
PD-(Watts)
1
0
0.25 0.5 0.75 1
Iout-(Amps)
70°
Vin
72V
60V
48V
36V
Note 1: All data listed in the above graphs, except for derating data, has been developed from actual products tested at 25°C. This data is considered typical data for the DC-DC Converter.
Note 2: Thermal derating graphs are developed in free air convection cooling of 40-60 LFM.
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com
71
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERST OOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1999, Texas Instruments Incorporated
Loading...