How it Works
Datasheet
Loading...
PT3342C

Datasheet PT3341A, PT3341C, PT3341N, PT3342A, PT3342C Datasheet (Texas Instruments)

...
Download
PT3340
30 WATT ISOLATED DC/DC CONVERTER
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com
Series
For assistance or to order, call (800) 531-5782
Standard Application
Cin= Optional 100µF/100V electrolytic C
out
= Required 330µF electrolytic
Q1= NFET
PT3340
7-9
4-6
14-17
+V
IN
-V
IN
+V
O
C
OUT
+
C
IN
+
19
+REMOTE SENSE
10-12
2
LOAD
18
-V
O
13
Q
1
-REMOTE SENSE
Inhibit
VO Adjust
• 30W Output Power
• Input Voltage Range:
18V to 60V
• 1500 VDC Isolation
• Vo Inhibit
• V
o
Adjust
• Differential Remote Sense
• Current Limit
• Short-Circuit Protection
• Over-Temperature Shutdown
• Undervoltage Lockout
• Flexibile SIP Package
• UL 1950, CSA 22.2 950
approval pending
• Meets EN60950
Features
The PT3340 is a new series of high­input voltage, 30 Watt, isolated DC to DC converters housed in a unique vertical or horizontal 19-pin SIP pack­age. The 18 to 60V input range allows easy integration into many distributed power applications which utilize 24V bus architectures.
The PT3340 series is available with output voltages from 3.3V to 15V. The output voltage is adjustable from 90 to
110% of nominal with the addition of an external resistor. Other easy to use features include an inhibit function and a differential remote sense which auto­matically compensates for any voltage drop from the converter to the load. The PT3340 includes built in current limit, short circuit protection and over­temperature shutdown.
The PT3340 requires a 330µF output
capacitor for proper operation.
(For dimensions and PC board layout, see Package Styles 840 and 850.)
PT Series Suffix
(PT1234X)
Case/Pin Configuration
Vertical Through-Hole
N
Horizontal Through-Hole
A
Horizontal Surface Mount
C
Ordering Information
PT3341¨ = 3.3V/8A PT3342¨ = 5.0V/6A PT3343¨ = 12.0V/2.5A PT3344¨ = 15.0V/2A
Preliminary Specifications
Characteristics
PT3340 SERIES
(Ta = 25°C unless noted) Symbols Conditions Min Typ Max Units
Output Current I
o
Over Vin range Vo = 3.3V 0.25 — 8.0 A
V
o
= 5V 0.25 — 6.0 A
Vo = 12V 0.1 — 2.5 A
On/Off Standby Current I
in standby
Vin = 24V, Pin 1 = -V
in
—7 14mA
Short Circuit Current I
sc
Vin = 24V — I
omax
x2 — A
Input Voltage Range V
in
Over Io Range 18.0 24.0 60.0 V
Output Voltage Tolerance ∆V
o
Over Vin Range TA= -40°C to +85°C
— ±1.0 — %V
o
Line Regulation Reg
line
Over Vin range @ max I
o
— ±0.5 — %V
o
Load Regulation Reg
load
10% to 100% of Io max — ±0.5 — %V
o
Vo Ripple/Noise V
n
Vin=24V, Io=Io max, Vo>5V — 1.0 — %V
o
Vin=24V, Io=Io max, Vo<5V — 50 — mV
pp
Transient Response t
tr
50% load change, 1A/µSec — 100 — µSec Vo over/undershoot, Vo>5V — 3.0 — %V
o
Efficiency η Vin=24V, Io=6A, Vo=3.3V — 80 — %
V
in
=24V, Io=6A, Vo=5V — 82 — %
Vin=24V, Io=2.5A, Vo=12V — 86 — %
Switching Frequency ƒ
o
Over Vin and Io Vo<10V 600 750 900 kHz
Vo>10V 400 500 600 kHz
Recommended Operating T
a
Vin = 48V @ max I
o
-40* — +85 °C
Temperature Range Airflow = 200 LFM Storage Temperature T
s
— -40 — +125 °C
Mechanical Shock — Per Mil-Std-883D, method 2002.3,
— 500 — G’s
1mS, half-sine, mounted to a fixture
Mechanical Vibration — Per Mil-Std-883D, method 2007.2,
—10—G’s
20-2000Hz, soldered in a PC board Weight — — — 40 — grams Input/Output Isolation — — 1500 — — VDC
Capacitance — — — 1200 — pF Resistance — — 10 — — MΩ
Flammability — Materials meet UL 94V-0 Inhibit (pin 2) On**
Referenced to -V
in
2.5 — 15 VDC
Off 0 — 0.8 VDC
* At temperatures below 0°C, the PT3340 series requires output capacitors with temperature stable dielectrics such as tantalum or Oscon.
** If pin 2 is left open, the PT3340 will operate when input power is applied.
Pin-Out Information
Pin Function
1 Do Not Use 2 Inhibit 3 Do Not Use 4-V
5-V
6-V
7+V
in
8+V
in
9+V
in
Pin Function
10 -V
o
11 -V
o
12 -V
o
13 -Remote Sense 14 +V
o
15 +V
o
16 +V
o
17 +V
o
18 Vo Adjust 19 +Remote Sense
* Note: This product is the subject of one or more patents. Other patents pending.
Patent pending*
New 30W Isolated SIPs
Revised 5/19/99
Application Notes
Mechanical Outline
Product Selector Guide
For assistance or to order, call (800) 531-5782
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com
Note 1: All data listed in the above graphs has been developed from actual products tested at 25°C. This data is considered typical data for the DC-DC Converter.
PT3342, 5.0 VDC (See Note 1) PT3343, 12.0 VDC (See Note 1)
Efficiency vs Output Current Efficiency vs Output Current Efficiency vs Output Current
Ripple vs Output Current Ripple vs Output Current Ripple vs Output Current
Power Dissipation vs Output Current Power Dissipation vs Output Current Power Dissipation vs Output Current
PT3341, 3.3 VDC (See Note 1)
Efficiency (%)Ripple (mV)PD (Watts)
Efficiency (%)
Efficiency (%)
Ripple (mV)
Ripple (mV)PD (Watts)
PD (Watts)
Iout (A) Iout (A)
Iout (A) Iout (A) Iout (A)
Iout (A) Iout (A)Iout (A)
Iout (A)
SeriesPT3340
CHARACTERISTIC DATA
Vin
Vin
Vin
Vin
Vin
Vin
Vin
Vin
Vin
40
50
60
70
80
90
100
02468
18.0V
24.0V
36.0V
48.0V
60.0V
0
10
20
30
40
50
60
02468
18.0V
24.0V
36.0V
48.0V
60.0V
0
2
4
6
8
10
02468
18.0V
24.0V
36.0V
48.0V
60.0V
40
50
60
70
80
90
100
0123456
18.0V
24.0V
36.0V
48.0V
60.0V
0
10
20
30
40
50
60
70
0123456
18.0V
24.0V
36.0V
48.0V
60.0V
0
2
4
6
8
0123456
18.0V
24.0V
36.0V
48.0V
60.0V
40
50
60
70
80
90
100
0.0 0.5 1.0 1.5 2.0 2.5
18.0V
24.0V
36.0V
48.0V
60.0V
0
20
40
60
80
100
120
0.0 0.5 1.0 1.5 2.0 2.5
18.0V
24.0V
36.0V
48.0V
60.0V
0
1
2
3
4
5
6
7
0.0 0.5 1.0 1.5 2.0 2.5
18.0V
24.0V
36.0V
48.0V
60.0V
Safe Operating Area (@Vin=24V) Safe Operating Area (@Vin=24V) Safe Operating Area (@Vin=24V)
Iout (A) Iout (A) Iout (A)
Ambient Temperature (°C)
Ambient Temperature (°C)
Ambient Temperature (°C)
Airflow
Airflow
Airflow
20
30
40
50
60
70
80
90
02468
Nat conv
60LFM
120LFM
200LFM
20
30
40
50
60
70
80
90
01234 56
Nat conv
60LFM
120LFM 200LFM
20
30
40
50
60
70
80
90
0 0.5 1 1.5 2 2.5
Nat conv
60LFM
120LFM
200LFM
For assistance or to order, call (800) 531-5782
3
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com
Application Notes
PT3320/3340 Series
More Application Notes
Adjusting the Output Voltage of the PT3320 / PT3340 Series of Isolated DC-DC Converters
The factory pre-set output voltage of Power Trends’ PT3320 and PT3340 series DC-DC converters may be adjusted within a nominal ±10% range. This is accomplished with the addition of a single external resistor. For the input voltage range specified in the data sheet, Table 1 gives the allowable adjustment range for each model as V
o
(min) and Vo (max).
Adjust Up: An increase in the output voltage is obtained by adding a resistor, R2 between pin 18 (V
o
adjust), and pin 13
(-Remote Sense).
See note 4.
Adjust Down: Add a resistor (R1), between pin 18 (V
o
adjust)
and pin 19 (+Remote Sense).
Refer to Figure 1 and Table 2 for both the placement and value of the required resistor, (R1) or R2.
Notes:
1. Use only a single 1% resistor in either the (R1) or R2 loca­tion. Place the resistor as close to the ISR as possible.
2. Never connect capacitors to Vo adjust. Any capacitance added to the Vo adjust control pin will affect the stability of the ISR.
Table 1
DC-DC CONVERTER ADJUSTMENT RANGE AND FORMULA PARAMETERS
Series Pt # 24V Bus PT3341 PT3342 PT3343 PT3344 48V Bus PT3325 PT3326 PT3321 PT3322 PT3323 PT3324
Vo(nom) 2.0V 2.5 3.3 5.0 12.0 15.0 Vo(min) 1.8V 2.25 2.95 4.5 10.8 13.5 Vo(max) 2.2 2.75 3.65 5.5 13.2 16.5 V
r 1.225 1.225 1.225 1.225 2.5 2.5
Ro (k
ΩΩ
ΩΩ
Ω) 80.6 33.2 33.2 18.2 14.3 11.0
Rs (k
ΩΩ
ΩΩ
Ω) 150.0 121.0 150.0 121.0 90.9 80.6
Figure 1
(R1) Adj Down
R2 Adj Up
Cin 100
µ
F 100V (Optional)
+
Cout 330
µ
F
+
L O A D
+V
-V
+V
in
-V
in
PT3320/3340
184, 5, 6
7, 8, 9
+Vin +Vout
-Vin Vo(adj)
Inhibit
2
Sns(+)
19
10 - 12
-Vout
14 - 17
Sns(-)
13
3. If the remote sense pins are not being used, the resistors (R1) and R2 can be connected to +V
out
or -V
out
respectively.
4. The adjusted output voltage V
a
effectively sets the voltage across pins 13 and 19 (±Remote Sense). When using the remote sense pins, V
out
(measured directly across pins 10–12, and 14–17) can be significantly higher than Va, and may exceed Vo (max). If Va is adjusted upward, the alternative is to increase the minimum input voltage by the same percent­age as V
out
exceeds Vo(max).
The values of (R1) [adjust down], and R2 [adjust up], can also be calculated using the following formulas.
(R1) =
R
o
(Vo – Vr)(Va – Vr)
– R
s
kΩ
Vr (Vo – Va)
R2 =
R
o
(Vo – Vr)
– R
s
kΩ
(Va – Vo)
Where V
o
= Original output voltage
V
a
= Adjusted output voltage
V
r
= Reference voltage (Table 1)
R
o
= Multiplier resistance (Table 1)
R
s
= Series resistance (Table 1)
For assistance or to order, call (800) 531-5782
4
Application
Power Trends, Inc. 27715 Diehl Road, Warrenville, IL 60555 (800) 531-5782 Fax: (630) 393-6902 http://www.powertrends.com
Notes
PT3320/3340 Series
Table 2
PT3320 / PT3340 ADJUSTMENT RESISTOR VALUES
Series Pt # 24V Bus PT3341 PT3342 PT3343 PT3344 48V Bus PT3325 PT3326 PT3321 PT3322 PT3323 PT3324 Current 8Adc 8Adc 8Adc 6adc 2.5Adc 2.0Adc Vo(nom) 2.0Vdc 2.5Vdc 3.3Vdc 5.0Vdc 12.0Vdc 15.0Vdc Va(req’d) Va(req’d Va(req’d)
1.8 0.0kΩ 4.5 (246.0)kΩ 10.8 (285.0)kΩ
1.85 (62.5)kΩ 4.55 (293.0)kΩ 11.0 (371.0)kΩ
1.9 (194.0)kΩ 4.6 (352.0)kΩ 11.2 (500.0)kΩ
1.95 (589.0)kΩ 4.65 (428.0)kΩ 11.4 (715.0)kΩ
2.0 4.7 (529.0)kΩ 11.6 (1150.0)kΩ
2.05 1100.0kΩ 4.75 (670.0)kΩ 11.8
2.1 475.0kΩ 4.8 (882.0)kΩ 12.0
2.15 266.0kΩ 4.85 (1230.0)kΩ 12.2 588.0kΩ
2.2 162.0kΩ 4.9 (1940.0)kΩ 12.4 249.0kΩ
2.25 (20.7)kΩ 4.95 12.6 136.0kΩ
2.3 (64.7.0)kΩ 5.0 12.8 78.9kΩ
2.35 (138.0)kΩ 5.05 13.0 45.0kΩ
2.4 (285.0)kΩ 5.1 566.0kΩ 13.2 22.3kΩ
2.45 (726.0)kΩ 5.15 337.0kΩ
2.5 5.2 223.0kΩ 13.5 (323.0)kΩ
2.55 726.0kΩ 5.25 154.0kΩ 13.6 (355.0)kΩ
2.6 302.0kΩ 5.3 108.0kΩ 13.8 (437.0)kΩ
2.65 161.0kΩ 5.35 75.3kΩ 14.0 (522.0)kΩ
2.7 90.6kΩ 5.4 50.8kΩ 14.2 (724.0)kΩ
2.75 48.3kΩ 5.45 31.7kΩ 14.4 (1010.0)kΩ
2.95 (127.0)kΩ 5.5 16.4kΩ 14.6 (1580.0)kΩ
3.0 (183.0)kΩ 14.8
3.05 (261.0)kΩ 15.0
3.1 (377.0)kΩ 15.2 607.0kΩ
3.15 (572.0)kΩ 15.4 263.0kΩ
3.2 (961.0)kΩ 15.6 149.0kΩ
3.25 (2130.0)kΩ 15.8 91.3kΩ
3.3 16.0 56.9kΩ
3.35 1230.0kΩ 16.5 11.1kΩ
3.4 539.0kΩ
3.45 309.0kΩ
3.5 194.0kΩ
3.55 126.0kΩ
3.6 79.6kΩ
3.65 46.8kΩ
R1 = (Red) R2 = Black
IMPORTANT NOTICE
T exas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements.
CERT AIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICA TIONS IS UNDERSTOOD T O BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI’s publication of information regarding any third party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1999, Texas Instruments Incorporated
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use