现货库存、技术资料、百科信息、热点资讯，精彩尽在鼎好!
www.ti.com
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
2OUT
V
CC
2IN−
2IN+
1IN−
1IN+
OUT3
OUT4
GND
4IN+
4IN−
3IN+
3IN−
LM139, LM139A . . . D, J, OR W PACKAGE
LM239.. . D, N, OR PW PACKAGE
LM239A. . . D PACKAGE
LM339, LM339A . . . D, DB, N, NS, OR PW PACKAGE
LM2901. . . D, N, NS, OR PW PACKAGE
(TOP VIEW)
3 2 1 20 19
9 10 11 12 13
4
5
6
7
8
18
17
16
15
14
GND
NC
4IN+
NC
4IN−
V
CC
NC
2IN−
NC
2IN+
2OUT
1OUT
NC
3IN−
3IN+
3OUT
4OUT
1IN−
1IN+
NC
LM139, LM139A . . . FK PACKAGE
(TOP VIEW)
NC − No internal connection
FEATURES
• Single Supply or Dual Supplies
• Wide Range of Supply Voltage:
– Max Rating . . . 2 V to 36 V
– Tested to 30 V . . . Non-V Devices
– Tested to 32 V . . . V-Suffix Devices
• Low Supply-Current Drain Independent of
Supply Voltage . . . 0.8 mA Typ
• Low Input Bias Current . . . 25 nA Typ
• Low Input Offset Current . . . 3 nA Typ (LM139)
• Low Input Offset Voltage . . . 2 mV Typ
• Common-Mode Input Voltage Range Includes
Ground
• Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ± 36 V
• Low Output Saturation Voltage
• Output Compatible With TTL, MOS, and CMOS
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
DESCRIPTION/ORDERING
INFORMATION
These devices consist of four independent voltage
comparators that are designed to operate from a
single power supply over a wide range of voltages.
Operation from dual supplies also is possible, as
long as the difference between the two supplies is
2 V to 36 V, and V
than the input common-mode voltage. Current drain
is independent of the supply voltage. The outputs
can be connected to other open-collector outputs to
achieve wired-AND relationships.
The LM139 and LM139A are characterized for operation over the full military temperature range of –55 ° C to
125 ° C. The LM239 and LM239A are characterized for operation from –25 ° C to 125 ° C. The LM339 and LM339A
are characterized for operation from 0 ° C to 70 ° C. The LM2901, LM2901AV, and LM2901V are characterized for
operation from –40 ° C to 125 ° C.
is at least 1.5 V more positive
CC
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1979–2006, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are
tested unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
www.ti.com
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
ORDERING INFORMATION
T
A
0 ° C to 70 ° C
–25 ° C to 85 ° C Tube of 90 LM239PW
–40 ° C to 125 ° C TSSOP – PW L2901
–55 ° C to 125 ° C
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
VIOmax ORDERABLE TOP-SIDE
AT 25 ° C PART NUMBER MARKING
5 mV 30 V SOP – NS Reel of 2000 LM339NSR LM339
2 mV 30 V SOP – NS Reel of 2000 LM339ANSR LM339A
5 mV 30 V Reel of 2500 LM239DR
2 mV 30 V SOIC – D LM239A
7 mV 30 V
7 mV 32 V
2 mV 32 V
5 mV 30 V LCCC – FK Tube of 55 LM139FK LM139FK
2 mV 30 V LCCC – FK Tube of 55 LM139AFK LM139AFK
MAX V
CC
PDIP – N Tube of 25 LM339N LM339N
SOIC – D LM339
SSOP – DB Reel of 2000 LM339DBR LM339
TSSOP – PW L339
PDIP – N Tube of 25 LM339AN LM339AN
SOIC – D LM339A
SSOP – DB Reel of 2000 LM339ADBR L339A
TSSOP – PW L339A
PDIP – N Tube of 25 LM239N LM239N
SOIC – D LM239
TSSOP – PW L239
PDIP – N Tube of 25 LM2901N LM2901N
SOIC – D LM2901
SOP – NS Reel of 2000 LM2901NSR LM2901
SOIC – D Reel of 2500 LM2901VQDR L2901V
TSSOP – PW Reel of 2000 LM2901VQPWR L2901V
SOIC – D Reel of 2500 LM2901AVQDR L2901AV
TSSOP – PW Reel of 2000 LM2901AVQPWR L2901AV
CFP – W Tube of 25 LM139W LM139W
CDIP – J Tube of 25 LM139J LM139J
SOIC – D LM139D
CFP – W Tube of 25 LM139AW LM139AW
CDIP – J Tube of 25 LM139AJ LM139AJ
SOIC – D LM139AD
PACKAGE
(1)
Tube of 50 LM339D
Reel of 2500 LM339DR
Tube of 90 LM339PW
Reel of 2000 LM339PWR
Tube of 50 LM339AD
Reel of 2500 LM339ADR
Tube of 90 LM339APW
Reel of 2000 LM339APWR
Tube of 50 LM239D
Reel of 2000 LM239PWR
Tube of 50 LM239AD
Reel of 2500 LM239ADR
Tube of 50 LM2901D
Reel of 2500 LM2901DR
Tube of 90 LM2901PW
Reel of 2000 LM2901PWR
Tube of 50 LM139D
Reel of 2500 LM139DR
Tube of 50 LM139AD
Reel of 2500 LM139ADR
2
Submit Documentation Feedback
www.ti.com
OUT
IN−
IN+
80-µA
Current
Regulator
80 µA
GND
OUT
V
CC
10 µA
60 µA
10 µA
IN+
IN−
All current values shown are nominal.
SYMBOL (EACH COMPARATOR)
SCHEMATIC (EACH COMPARATOR)
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Submit Documentation Feedback
3
www.ti.com
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)
V
Supply voltage
CC
V
Differential input voltage
ID
V
Input voltage range (either input) –0.3 36 V
I
V
Output voltage 36 V
O
I
Output current 20 mA
O
Duration of output short circuit to ground
θ
Package thermal impedance
JA
θ
Package thermal impedance
JC
T
Operating virtual junction temperature 150 ° C
J
Case temperature for 60 s FK package 260 ° C
Lead temperature 1,6 mm (1/16 in) from case for 60 s J package 300 ° C
T
Storage temperature range –65 150 ° C
stg
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to network ground.
(3) Differential voltages are at IN+ with respect to IN–.
(4) Short circuits from outputs to V
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD= (T
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
(7) Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD= (T
(8) The package thermal impedance is calculated in accordance with MIL-STD-883.
(2)
(max) – TA)/ θJA. Operating at the absolute maximum TJof 150 ° C can affect reliability.
J
(max) – TC)/ θJC. Operating at the absolute maximum TJof 150 ° C can affect reliability.
J
(1)
(3)
(4)
(5) (6)
(7) (8)
can cause excessive heating and eventual destruction.
CC
MIN MAX UNIT
D package 86
DB package 96
N package 80 ° C/W
NS package 76
PW package 113
FK package 5.61
J package 15.05 ° C/W
W package 14.65
36 V
± 36 V
Unlimited
4
Submit Documentation Feedback
www.ti.com
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Electrical Characteristics
at specified free-air temperature, V
PARAMETER TEST CONDITIONS
V
Input offset voltage VIC= V
IO
I
Input offset current VO= 1.4 V nA
IO
I
Input bias current VO= 1.4 V nA
IB
Common-mode
V
ICR
input-voltage range
Large-signal
A
differential-voltage 25 ° C 200 50 200 V/mV
VD
amplification
I
High-level output current VID= 1 V
OH
V
Low-level output voltage VID= –1 V, IOL= 4 mA mV
OL
I
Low-level output current VID= –1 V, V
OL
Supply current
I
CC
(four comparators)
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM139 and LM139A is –55 ° C to 125 ° C. All characteristics are measured with zero common-mode input
voltage, unless otherwise specified.
= 5 V (unless otherwise noted)
CC
(1)
V
= 5 V to 30 V, 25 ° C 2 5 1 2
CC
VO= 1.4 V
min, mV
ICR
(2)
T
A
Full range 9 4
LM139 LM139A
MIN TYP MAX MIN TYP MAX
25 ° C 3 25 3 25
Full range 100 100
25 ° C –25 –100 –25 –100
Full range –300 –300
0 to 0 to
V
– 1.5 V
CC
0 to 0 to
V
– 2 V
CC
– 1.5
CC
– 2
CC
V
= ± 7.5 V,
CC+
VO= –5 V to 5 V
25 ° C
Full range
V
= 5 V 25 ° C 0.1 0.1 nA
OH
V
= 30 V Full range 1 1 µ A
OH
25 ° C 150 400 150 400
Full range 700 700
= 1.5 V 25 ° C 6 16 6 16 mA
OL
VO= 2.5 V, No load 25 ° C 0.8 2 0.8 2 mA
UNIT
V
Switching Characteristics
V
= 5 V, TA= 25 ° C
CC
LM139
PARAMETER TEST CONDITIONS UNIT
Response time µ s
RLconnected to 5 V through 5.1 k Ω ,
CL= 15 pF
(1) (2)
100-mV input step with 5-mV overdrive 1.3
TTL-level input step 0.3
(1) CLincludes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
LM139A
TYP
Submit Documentation Feedback
5
www.ti.com
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Electrical Characteristics
at specified free-air temperature, V
PARAMETER TEST CONDITIONS
V
Input offset voltage VIC= V
IO
I
Input offset current VO= 1.4 V nA
IO
I
Input bias current VO= 1.4 V nA
IB
Common-mode
V
ICR
input-voltage range
Large-signal V
A
differential-voltage VO= 1.4 V to 11.4 V, 25 ° C 50 200 50 200 V/mV
VD
amplification RL≥ 15 k Ω to V
I
High-level output current VID= 1 V
OH
V
Low-level output voltage VID= –1 V, IOL= 4 mA mV
OL
I
Low-level output current VID= –1 V, V
OL
Supply current
I
CC
(four comparators)
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM239/LM239A is –25 ° C to 85 ° C, and for LM339/LM339A is 0 ° C to 70 ° C. All characteristics are measured
with zero common-mode input voltage, unless otherwise specified.
= 5 V (unless otherwise noted)
CC
LM239 LM239A
(1)
(2)
T
A
LM339 LM339A
MIN TYP MAX MIN TYP MAX
V
= 5 V to 30 V, 25 ° C 2 5 1 3
CC
VO= 1.4 V
min, mV
ICR
Full range 9 4
25 ° C 5 50 5 50
Full range 150 150
25 ° C –25 –250 –25 –250
Full range –400 –400
25 ° C
Full range
= 15 V,
CC
CC
V
= 5 V 25 ° C 0.1 50 0.1 50 nA
OH
V
= 30 V Full range 1 1 µ A
OH
0 to 0 to
V
– 1.5 V
CC
0 to 0 to
V
– 2 V
CC
– 1.5
CC
– 2
CC
25 ° C 150 400 150 400
Full range 700 700
= 1.5 V 25 ° C 6 16 6 16 mA
OL
VO= 2.5 V, No load 25 ° C 0.8 2 0.8 2 mA
UNIT
V
Switching Characteristics
V
= 5 V, TA= 25 ° C
CC
LM239
LM239A
PARAMETER TEST CONDITIONS UNIT
Response time µ s
RLconnected to 5 V through 5.1 k Ω ,
CL= 15 pF
(1) (2)
100-mV input step with 5-mV overdrive 1.3
TTL-level input step 0.3
(1) CLincludes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
LM339
LM339A
TYP
6
Submit Documentation Feedback
www.ti.com
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
Electrical Characteristics
at specified free-air temperature, V
PARAMETER TEST CONDITIONS
V
Input offset voltage VO= 1.4 V, mV
IO
I
Input offset current VO= 1.4 V nA
IO
I
Input bias current VO= 1.4 V nA
IB
Common-mode
V
ICR
input-voltage range
Large-signal
A
differential-voltage 25 ° C 25 100 V/mV
VD
amplification
I
High-level output current VID= 1 V
OH
V
Low-level output voltage V-suffix devices 150 400 mV
OL
I
Low-level output current VID= –1 V, V
OL
Supply current VO= 2.5 V,
I
CC
(four comparators) No load
(1) All characteristics are measured with zero common-mode input voltage, unless otherwise specified.
(2) Full range (MIN to MAX) for LM2901 is –40 ° C to 125 ° C. All characteristics are measured with zero common-mode input voltage, unless
otherwise specified.
(3) V
MAX = 30 V for non-V devices, and 32 V for V-suffix devices
CC
= 5 V (unless otherwise noted)
CC
VIC= V
V
CC
V
CC
RL≥ 15 k Ω to V
min,
ICR
= 5 V to MAX
= 15 V, VO= 1.4 V to 11.4 V,
CC
VID= –1 V,
IOL= 4 mA
(1)
Non-A devices
(3)
A-suffix devices
(2)
T
A
25 ° C 2 7
Full range 15
25 ° C 1 2
Full range 4
25 ° C 5 50
Full range 200
25 ° C –25 –250
Full range –500
25 ° C
V
Full range
V
= 5 V 25 ° C 0.1 50 nA
OH
V
= V
OH
Non-V devices 150 500
(3)
MAX
CC
Full range 1 µ A
25 ° C
All devices Full range 700
= 1.5 V 25 ° C 6 16 mA
OL
V
= 5 V 0.8 2
CC
V
CC
(3)
= MAX
25 ° C mA
MIN TYP MAX
0 to
– 1.5
CC
0 to
V
CC
LM2901
– 2
1 2.5
UNIT
V
Switching Characteristics
V
= 5 V, TA= 25 ° C
CC
PARAMETER TEST CONDITIONS UNIT
Response time µ s
RLconnected to 5 V through 5.1 k Ω ,
CL= 15 pF
(1) (2)
100-mV input step with 5-mV overdrive 1.3
TTL-level input step 0.3
(1) CLincludes probe and jig capacitance.
(2) The response time specified is the interval between the input step function and the instant when the output crosses 1.4 V.
Submit Documentation Feedback
LM2901
TYP
7
www.ti.com
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
0 5 10 15 20 25 30 35
VCC– Supply Voltage – V
I
CC
– Supply Current – mA
T = –55°C
A
T = 0°C
A
T = 25°C
A
T = 70°C
A
T = 125°C
A
0
10
20
30
40
50
60
70
80
0 5 10 15 20 25 30 35
VCC– Supply Voltage – V
I
IN
– Input Bias Current – nA
T = –55°C
A
T = 0°C
A
T = 25°C
A
T = 70°C
A
T = 125°C
A
0.001
0.01
0.1
1
10
0.01 0.1 1 10 100
IO– Output Sink Current – mA
V
O
– Saturation Voltage – V
T = –55°C
A
T = 25°C
A
T = 125°C
A
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
TYPICAL CHARACTERISTICS
SUPPLY CURRENT INPUT BIAS CURRENT
vs vs
SUPPLY VOLTAGE SUPPLY VOLTAGE
OUTPUT SATURATION VOLTAGE
8
Submit Documentation Feedback
www.ti.com
-1
0
1
2
3
4
5
6
-0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25
t – Time – µs
V
O
– Output Voltage – V
Overdrive = 5 mV
Overdrive = 100 mV
Overdrive = 20 mV
-1
0
1
2
3
4
5
6
-0.3 0 0.25 0.5 0.75 1 1.25 1.5 1.75 2 2.25
t – Time – µs
V
O
– Output Voltage – V
Overdrive = 5 mV
Overdrive = 100 mV
Overdrive = 20 mV
TYPICAL CHARACTERISTICS (continued)
LM139 , , LM139A , , LM239 , , LM239A
LM339 , LM339A , LM2901 , LM2901AV , LM2901V
QUAD DIFFERENTIAL COMPARATORS
SLCS006N – OCTOBER 1979 – REVISED NOVEMBER 2006
RESPONSE TIME FOR VARIOUS OVERDRIVES RESPONSE TIME FOR VARIOUS OVERDRIVES
NEGATIVE TRANSITION POSITIVE TRANSITION
Submit Documentation Feedback
9
PACKAGE OPTION ADDENDUM
www.ti.com
PACKAGING INFORMATION
Orderable Device Status
5962-7700801VCA ACTIVE CDIP J 14 1 TBD A42 SNPB N/ A for Pkg Type
5962-87739012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
5962-8773901CA ACTIVE CDIP J 14 1 TBD A42 SNPB N/ A for Pkg Type
5962-8773901DA ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
77008012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
7700801CA ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
7700801DA ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
JM38510/11201BCA ACTIVE CDIP J 14 1 TBD A42 SNPB N/ A for Pkg Type
LM139AD ACTIVE SOIC D 14 50 TBD CU NIPDAU Level-3-245C-168 HR
LM139ADR ACTIVE SOIC D 14 2500 Pb-Free
LM139AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM139AJ ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM139AJB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM139AN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM139AW ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
LM139AWB ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
LM139D ACTIVE SOIC D 14 50 TBD CU NIPDAU Level-1-220C-UNLIM
LM139DR ACTIVE SOIC D 14 2500 TBD CU NIPDAU Level-1-220C-UNLIM
LM139FK ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM139FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
LM139J ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM139JB ACTIVE CDIP J 14 1 TBD A42 SNPB N / A for Pkg Type
LM139N OBSOLETE PDIP N 14 TBD Call TI Call TI
LM139W ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
LM139WB ACTIVE CFP W 14 1 TBD A42 SNPB N / A for Pkg Type
LM239AD ACTIVE SOIC D 14 50 Green (RoHS &
LM239ADE4 ACTIVE SOIC D 14 50 Green (RoHS &
LM239ADR ACTIVE SOIC D 14 2500 Green (RoHS &
LM239ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
LM239AN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM239D ACTIVE SOIC D 14 50 Green (RoHS &
LM239DE4 ACTIVE SOIC D 14 50 Green (RoHS &
LM239DG4 ACTIVE SOIC D 14 50 Green (RoHS &
LM239DR ACTIVE SOIC D 14 2500 Green (RoHS &
LM239DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
no Sb/Br)
no Sb/Br)
no Sb/Br)
no Sb/Br)
no Sb/Br)
no Sb/Br)
no Sb/Br)
no Sb/Br)
no Sb/Br)
(RoHS)
(2)
Lead/Ball Finish MSL Peak Temp
CU NIPDAU Level-2-250C-1 YEAR/
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
Level-1-235C-UNLIM
21-Nov-2006
(3)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device Status
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
LM239DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
(2)
Lead/Ball Finish MSL Peak Temp
CU NIPDAU Level-1-260C-UNLIM
21-Nov-2006
no Sb/Br)
LM239N ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM239NE4 ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM239PW ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM239PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM239PWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM239PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901AVQDR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2901AVQPWR ACTIVE TSSOP PW 14 2000 TBD CU NIPDAU Level-1-250C-UNLIM
LM2901D ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901DE4 ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901DG4 ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901DR ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901N ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM2901NE4 ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM2901NSR ACTIVE SO NS 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901NSRE4 ACTIVE SO NS 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901PW ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM2901PWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM2901QD OBSOLETE SOIC D 14 TBD Call TI Call TI
(3)
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device Status
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
(2)
Lead/Ball Finish MSL Peak Temp
21-Nov-2006
LM2901QN OBSOLETE PDIP N 14 TBD Call TI Call TI
LM2901VQDR ACTIVE SOIC D 14 2500 Pb-Free
(RoHS)
CU NIPDAU Level-2-250C-1 YEAR/
Level-1-235C-UNLIM
LM2901VQPWR ACTIVE TSSOP PW 14 2000 TBD CU NIPDAU Level-1-250C-UNLIM
LM339AD ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ADBR ACTIVE SSOP DB 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ADBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ADE4 ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ADG4 ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ADR ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339AN ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM339ANE4 ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM339ANSR ACTIVE SO NS 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339APW ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339APWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339D ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339DBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI
LM339DBR ACTIVE SSOP DB 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339DE4 ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339DG4 ACTIVE SOIC D 14 50 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339DR ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339DRE4 ACTIVE SOIC D 14 2500 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
(3)
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com
Orderable Device Status
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
LM339DRG4 ACTIVE SOIC D 14 2500 Green (RoHS &
(2)
Lead/Ball Finish MSL Peak Temp
CU NIPDAU Level-1-260C-UNLIM
21-Nov-2006
(3)
no Sb/Br)
LM339N ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM339NE4 ACTIVE PDIP N 14 25 Pb-Free
CU NIPDAU N / A for Pkg Type
(RoHS)
LM339NSLE OBSOLETE SO NS 14 TBD Call TI Call TI
LM339NSR ACTIVE SO NS 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339NSRG4 ACTIVE SO NS 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339PW ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339PWE4 ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339PWG4 ACTIVE TSSOP PW 14 90 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
LM339PWR ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS &
CU NIPDAU Level-1-260C-UNLIM
no Sb/Br)
LM339Y OBSOLETE 0 TBD Call TI Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
21-Nov-2006
Addendum-Page 5
MECHANICAL DATA
MLCC006B – OCTOBER 1996
FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
A SQ
B SQ
19
20
21
22
23
24
25
12826 27
12
1314151618 17
0.020 (0,51)
0.010 (0,25)
MIN
0.342
(8,69)
0.442
0.640
0.739
0.938
1.141
A
0.358
(9,09)
0.458
(11,63)
0.660
(16,76)
0.761
(19,32)(18,78)
0.962
(24,43)
1.165
(29,59)
NO. OF
TERMINALS
**
11
10
9
8
7
6
5
432
20
28
44
52
68
84
0.020 (0,51)
0.010 (0,25)
(11,23)
(16,26)
(23,83)
(28,99)
MINMAX
0.307
(7,80)
0.406
(10,31)
0.495
(12,58)
0.495
(12,58)
0.850
(21,6)
1.047
(26,6)
0.080 (2,03)
0.064 (1,63)
B
MAX
0.358
(9,09)
0.458
(11,63)
0.560
(14,22)
0.560
(14,22)
0.858
(21,8)
1.063
(27,0)
0.055 (1,40)
0.045 (1,14)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a metal lid.
D. The terminals are gold plated.
E. Falls within JEDEC MS-004
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
4040140/D 10/96
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,65
28
1
2,00 MAX
0,38
0,22
15
14
A
0,05 MIN
0,15
5,60
5,00
M
8,20
7,40
Seating Plane
0,10
0,25
0,09
0°–ā8°
Gage Plane
0,25
0,95
0,55
PINS **
DIM
A MAX
A MIN
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
14
6,50
6,50
5,905,90
2016
7,50
6,90
24
8,50
28
10,50
9,907,90
30
10,50
9,90
38
12,90
12,30
4040065 /E 12/01
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65
1,20 MAX
14
0,30
0,19
8
4,50
4,30
PINS **
7
Seating Plane
0,15
0,05
8
1
A
DIM
6,60
6,20
14
0,10
M
0,10
0,15 NOM
0°–8°
2016
Gage Plane
24
0,25
0,75
0,50
28
A MAX
A MIN
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-153
3,10
2,90
5,10
4,90
5,10
4,90
6,60
6,40
7,90
7,70
9,80
9,60
4040064/F 01/97
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty . Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2006, Texas Instruments Incorporated
Loading...