
EGP20A - EGP20K
2.0 Ampere Glass Passivated High Efficiency Rectifiers
Features
• Glass passivated cavity-free junction
• High surge current capability
• Low leakage current
• Superfast recovery time for high efficiency
• Low forward voltage, high current capability
DO-15 Glass case
COLOR BAND DENOTES CATHODE
EGP20A - EGP20K 2.0 Ampere Glass Passivated High Efficiency Rectifiers
July 2007
Absolute Maximum Ratings* T
= 25°C unless otherwise noted
a
Symbol Parameter Value Units
I
O
i
f(surge)
P
D
RθJA Thermal Resistance, Junction to Ambient 40 °C/W
RθJL Thermal Resistance, Junction to Lead 15 °C/W
TJ, T
* These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Electrical Characteristics* T
Average Rectified Current
.375 " lead length @ TL = 55°C
Peak Forward Surge Current
8.3 ms single half-sine-wave
Superimposed on rated load (JEDEC method)
Total Device Dissipation
Derate above 25°C
Junction and Storage Temperature Range -65 ~ 150 °C
STG
= 25°C unless otherwise noted
a
2.0 A
75 A
3.13
25
W
mW°C
Device
Parameter
Peak Repetitive Reverse Voltage
Maximum RMS Voltage 35 70 105 140 210 280 420 560 V
DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V
Maximum Reverse Current
@ rated V
T
Maximum Reverse Recovery Time
I
F = 0.5 A, IR = 1.0 A, Irr = 0.25 A
Maximum Forward Voltage @ 2.0 A 0.95 1.25 1.7 V
Typical Junction Capacitance
V
R = 4.0 V, f = 1.0 MHz
* Pulse Test: Pulse Width≤300μs, Duty Cycle≤2%
R TA = 25°C
A = 125°C
20A 20B 20C 20D 20F 20G 20J 20K
50 100 150 200 300 400 600 800 V
5.0
100
50 75 nS
70 45 pF
Units
μA
μA
©2007 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com
EGP20A - EGP20K Rev. A

Typical Performance Characteristics
EGP20A - EGP20K 2.0 Ampere Glass Passivated High Efficiency Rectifiers
EGP20A - EGP20K Rev. A
2 www.fairchildsemi.com

Reverse Recovery Time Characterstic and Test Circuit Diagram
EGP20A - EGP20K 2.0 Ampere Glass Passivated High Efficiency Rectifiers
EGP20A - EGP20K Rev. A
3 www.fairchildsemi.com

TRADEMARKS
The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and
is not intended to be an exhaustive list of all such trademarks.
®
ACEx
Build it Now™
CorePLUS™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK
Fairchild
®
®
Fairchild Semiconductor
FACT Quiet Series™
®
FACT
®
FAST
FastvCore™
FPS™
®
FRFET
Global Power Resource
®
SM
Green FPS™
Green FPS™ e-Series™
GTO™
i-Lo™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
Motion-SPM™
OPTOLOGIC
OPTOPLANAR
®
PDP-SPM™
Power220
®
®
®
Power247
POWEREDGE
Power-SPM™
PowerTrench
Programmable Active Droop™
QFET
QS™
QT Optoelectronics™
Quiet Series™
RapidConfigure™
SMART START™
SPM
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS
HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIA BILITY ARISING OUT OF
THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CO NVEY ANY LICENSE
UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF
FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE
PRODUCTS.
®
®
®
®
SuperSOT™-8
SyncFET™
The Power Franchise
TinyBoost™
TinyBuck™
TinyLogic
®
®
TINYOPTO™
TinyPower™
®
TinyPWM™
TinyWire™
µSerDes™
®
UHC
UniFET™
VCX™
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the bo dy, or
(b) support or sustain life, and (c ) whose failure to perform
when properly used in accordance with instructions for use
2. A critical component is any component of a life support
device or system whose failure to perform can be reasonably
expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
provided in the labeling, can be reasonably expected to result
in significant injury to the user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative or In Design
This datasheet contains the design specifications for product development.
Specifications may change in any manner without notice.
This datasheet contains preliminary data; supplementary data will be pub-
Preliminary First Production
lished at a later date. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve design.
No Identification Needed Full Production
This datasheet contains final specifications. Fairchild Semiconductor reserves
the right to make changes at any time without notice to improve design.
This datasheet contains specifications on a product that has been discontin-
Obsolete Not In Production
ued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I30