55°C to 125°C
SOIC
M
AC153M
OUTPUT
G
Y
查询CD54AC153F3A供应商
CD54AC153, CD74AC153
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCHS334A – MARCH 2003 - REVISED MA Y 2003
D
AC Types Feature 1.5-V to 5.5-V
Operation and Balanced Noise
Immunity at 30% of the Supply
D
Speed of Bipolar F, AS, and S, With
Significantly Reduced Power
Consumption
D
Balanced Propagation Delays
D
±24-mA Output Drive Current
– Fanout to 15 F Devices
D
SCR-Latchup-Resistant CMOS Process
and Circuit Design
D
Exceeds 2-kV ESD Protection Per
CD54AC153 ...F PACKAGE
CD74AC153 ...E OR M PACKAGE
1G
1C3
1C2
1C1
1C0
1Y
GND
(TOP VIEW)
1
B
2
3
4
5
6
7
8
16
15
14
13
12
11
10
V
CC
2G
A
2C3
2C2
2C1
2C0
9
2Y
MIL-STD-883, Method 3015
description/ordering information
Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data
selection to the AND-OR gates. Separate strobe (G
ORDERING INFORMA TION
T
A
PDIP – E Tube CD74AC153E CD74AC153E
–
CDIP – F Tube CD54AC153F3A CD54AC153F3A
†
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines
are available at www.ti.com/sc/package.
PACKAGE
–
†
Tube CD74AC153M
Tape and reel CD74AC153M96
) inputs are provided for each of the two 4-line sections.
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
SELECT
B A C0 C1 C2 C3
X X X X X X H L
L LLXXXL L
L LHXXXL H
L HXLXXL L
L HXHXXL H
H LXXLXL L
H LXXHXL H
H HXXXLL L
H H X X X H L H
‡
Select inputs A and B are common to both sections.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
FUNCTION TABLE
INPUTS
‡
DATA
Copyright 2003, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
1
CD54AC153, CD74AC153
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCHS334A – MARCH 2003 - REVISED MAY 2003
logic diagram (positive logic)
14
A
2
B
1
1G
6
1C0
1C1
1C2
1C3
5
4
3
TG
TG
TG
TG
TG
TG
7
1Y
2G
2C0
2C1
2C2
2C3
15
10
11
12
13
TG
TG
TG
TG
TG
TG
9
2Y
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
∆t/∆v
Input transition rise or fall rate
ns/V
CD54AC153, CD74AC153
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCHS334A – MARCH 2003 - REVISED MAY 2003
absolute maximum ratings over operating free-air temperature range
Supply voltage range, V
Input clamp current, I
Output clamp current, I
Continuous output current, I
Continuous current through V
Package thermal impedance, θ
–0.5 V to 6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
(VI < 0 or VI > VCC) (see Note 1) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IK
(VO < 0 or VO > VCC) (see Note 1) ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OK
(VO = 0 to VCC) ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
O
or GND ±100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CC
(see Note 2): E package 67°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
JA
†
M package 73°C/W. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, T
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. The package thermal impedance is calculated in accordance with JESD 51-7.
–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
recommended operating conditions (see Note 3)
TA = 25°C
MIN MAX MIN MAX MIN MAX
V
V
V
V
V
I
OH
I
OL
NOTE 3: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Supply voltage 1.5 5.5 1.5 5.5 1.5 5.5 V
CC
VCC = 1.5 V 1.2 1.2 1.2
High-level input voltage
IH
Low-level input voltage
IL
Input voltage 0 V
I
Output voltage 0 V
O
High-level output current VCC = 4.5 V to 5.5 V –24 –24 –24 mA
Low-level output current VCC = 4.5 V to 5.5 V 24 24 24 mA
p
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
VCC = 3 V
VCC = 5.5 V 3.85 3.85 3.85
VCC = 1.5 V 0.3 0.3 0.3
VCC = 3 V
VCC = 5.5 V 1.65 1.65 1.65
VCC = 1.5 V to 3 V 50 50 50
VCC = 3.6 V to 5.5 V 20 20 20
2.1 2.1 2.1
–55°C to
125°C
0.9 0.9 0.9
CC
CC
0 V
0 V
CC
CC
–40°C to
85°C
0 V
0 V
CC
CC
UNIT
V
V
V
V
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
3
CD54AC153, CD74AC153
CC
(INPUT)
(OUTPUT)
A or B
Y
ns
Any C
Y
ns
G
Y
ns
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCHS334A – MARCH 2003 - REVISED MAY 2003
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER TEST CONDITIONS V
1.5 V 1.4 1.4 1.4
IOH = –50 µA
V
OH
V
OL
I
I
I
CC
C
†
i
T est one output at a time, not exceeding 1-second duration. Measurement is made by forcing indicated current and measuring voltage to minimize
power dissipation. T est verifies a minimum 50-Ω transmission-line drive capability at 85°C and 75-Ω transmission-line drive capability at 125°C.
VI = VIH or V
VI = VIH or V
VI = VCC or GND 5.5 V ±0.1 ±1 ±1 µA
VI = VCC or GND, IO = 0 5.5 V 8 160 80 µA
IL
IL
IOH = –4 mA 3 V 2.58 2.4 2.48
IOH = –24 mA 4.5 V 3.94 3.7 3.8
IOH = –50 mA
IOH = –75 mA
IOL = 50 µA
IOL = 12 mA 3 V 0.36 0.5 0.44
IOL = 24 mA 4.5 V 0.36 0.5 0.44
IOL = 50 mA
IOL = 75 mA
†
†
†
†
3 V 2.9 2.9 2.9
4.5 V 4.4 4.4 4.4
5.5 V 3.85
5.5 V 3.85
1.5 V 0.1 0.1 0.1
3 V 0.1 0.1 0.1
4.5 V 0.1 0.1 0.1
5.5 V 1.65
5.5 V 1.65
TA = 25°C
MIN MAX MIN MAX MIN MAX
–55°C to
125°C
10 10 10 pF
–40°C to
85°C
UNIT
V
V
switching characteristics over recommended operating free-air temperature range,
V
= 1.5 V, CL = 50 pF (unless otherwise noted) (see Figure 1)
CC
PARAMETER
t
PLH
t
PHL
t
PLH
t
PHL
t
PLH
t
PHL
FROM
TO
–55°C to
125°C
MIN MAX MIN MAX
250 227
250 227
166 151
166 151
148 134
148 134
–40°C to
85°C
UNIT
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
(INPUT)
(OUTPUT)
A or B
Y
ns
Any C
Y
ns
G
Y
ns
(INPUT)
(OUTPUT)
A or B
Y
ns
Any C
Y
ns
G
Y
ns
CD54AC153, CD74AC153
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCHS334A – MARCH 2003 - REVISED MAY 2003
switching characteristics over recommended operating free-air temperature range,
V
= 3.3 V ± 0.3 V, CL = 50 pF (unless otherwise noted) (see Figure 1)
CC
–55°C to
125°C
MIN MAX MIN MAX
7 28 7.2 25.5
7 28 7.2 25.5
4.7 18.6 4.8 16.9
4.7 18.6 4.8 16.9
4.1 16.5 4.3 15
4.1 16.5 4.3 15
PARAMETER
t
PLH
t
PHL
t
PLH
t
PHL
t
PLH
t
PHL
FROM
TO
switching characteristics over recommended operating free-air temperature range,
V
= 5 V ± 0.5 V, CL = 50 pF (unless otherwise noted) (see Figure 1)
CC
–55°C to
125°C
MIN MAX MIN MAX
5 20 5.2 18.2
5 20 5.2 18.2
3.3 13.3 3.4 12.1
3.3 13.3 3.4 12.1
3 11.8 3.1 10.7
3 11.8 3.1 10.7
PARAMETER
t
PLH
t
PHL
t
PLH
t
PHL
t
PLH
t
PHL
FROM
TO
–40°C to
–40°C to
85°C
85°C
UNIT
UNIT
operating characteristics, TA = 25°C
C
Power dissipation capacitance 93 pF
pd
PARAMETER TYP UNIT
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
5
CD54AC153, CD74AC153
DUAL 4-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS
SCHS334A – MARCH 2003 - REVISED MAY 2003
PARAMETER MEASUREMENT INFORMATION
S1
50% V
t
r
CC
t
f
†
†
CC
t
rec
50% V
50% V
t
PHL
t
PLH
.
dis
CC
CC
50%
From Output
Under Test
CL = 50 pF
(see Note A)
†
When VCC = 1.5 V, R1 = R2 = 1 kΩ
CLR
Input
CLK
VOLTAGE WAVEFORMS
Input
In-Phase
Output
Out-of-Phase
Output
PROPAGATION DELAY AND OUTPUT TRANSITION TIMES
NOTES: A. CL includes probe and test-fixture capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr = 3 ns, tf = 3 ns.
D. For clock inputs, f
E. The outputs are measured one at a time with one input transition per measurement.
F. t
G. t
H. t
I. All parameters and waveforms are not applicable to all devices.
50% V
CC
t
PLH
50%
t
PHL
VOLTAGE WAVEFORMS
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
Phase relationships between waveforms are arbitrary.
and t
PLH
PZL
PLZ
and t
and t
PHL
PZH
PHZ
R1 = 500 Ω
R2 = 500 Ω
LOAD CIRCUIT
RECOVERY TIME
90% 90%
50% V
10% 10%
is measured with the input duty cycle at 50%.
max
are the same as tpd.
are the same as ten.
are the same as t
2 × V
Open
GND
50% V
10%10%
90%90%
V
0 V
V
0 V
CC
CC
CC
TEST S1
t
w
50% V
50% V
50% V
Open
2 × V
GND
CC
50% V
CC
t
h
CC
CC
CC
50% V
50% V
20% V
80% V
CC
50% V
10%10%
t
CC
t
PLZ
t
PHZ
V
0 V
f
CC
CC
CC
V
0 V
V
CC
0 V
V
CC
0 V
≈V
V
OL
V
OH
≈0 V
CC
CC
CC
t
PLH/tPHL
t
PLZ/tPZL
t
PHZ/tPZH
Input
Reference
Input
Data
Input
SETUP AND HOLD AND INPUT RISE AND FALL TIMES
V
CC
0 V
V
OH
CC
V
OL
t
f
V
OH
V
OL
t
r
Waveform 1
S1 at 2 × V
(see Note B)
Waveform 2
(see Note B)
50%
Output
Control
Output
Output
S1 at GND
OUTPUT ENABLE AND DISABLE TIMES
50% V
CC
VOLTAGE WAVEFORMS
PULSE DURATION
t
su
90% 90%
t
r
VOLTAGE WAVEFORMS
t
PZL
CC
t
PZH
VOLTAGE WAVEFORMS
Figure 1. Load Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
26-Sep-2005
PACKAGING INFORMATION
Orderable Device Status
(1)
Package
Type
Package
Drawing
Pins Package
Qty
Eco Plan
CD54AC153F3A ACTIVE CDIP J 16 1 TBD Call TI Level-NC-NC-NC
CD74AC153E ACTIVE PDIP N 16 25 Pb-Free
CD74AC153EE4 ACTIVE PDIP N 16 25 Pb-Free
CD74AC153M ACTIVE SOIC D 16 40 Green (RoHS &
no Sb/Br)
CD74AC153M96 ACTIVE SOIC D 16 2500 Green (RoHS &
no Sb/Br)
CD74AC153M96E4 ACTIVE SOIC D 16 2500 Green (RoHS &
no Sb/Br)
CD74AC153ME4 ACTIVE SOIC D 16 40 Green (RoHS &
no Sb/Br)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(RoHS)
(RoHS)
(2)
Lead/Ball Finish MSL Peak Temp
CU NIPDAU Level-NC-NC-NC
CU NIPDAU Level-NC-NC-NC
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
CU NIPDAU Level-1-260C-UNLIM
(3)
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS) or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty . Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products Applications
Amplifiers amplifier.ti.com Audio www.ti.com/audio
Data Converters dataconverter.ti.com Automotive www.ti.com/automotive
DSP dsp.ti.com Broadband www.ti.com/broadband
Interface interface.ti.com Digital Control www.ti.com/digitalcontrol
Logic logic.ti.com Military www.ti.com/military
Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork
Microcontrollers microcontroller.ti.com Security www.ti.com/security
Telephony www.ti.com/telephony
Video & Imaging www.ti.com/video
Wireless www.ti.com/wireless
Mailing Address: Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright 2005, Texas Instruments Incorporated
Loading...