Tevion TV29BWC Instruction Manual

68cm CRT Colour TV
Instruction Manual
Model Number:TV29BWC
TEL: WEB: 1300 366 144 warrantyhelp@awa.com.au
After Sales Support
Contents
Introduction General Information and Safety Instructions Assembly and Parts List Getting Started Features
Instructions
FAQ
Other Useful Information
Warranty Card
2 2 3 3 4 4 5 5 6 6 10 7 11 8 12 9
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au
Page No. / Section
Dear customer,
Thank you for your purchasing this colour TV and we wish you many years of viewing pleasure with your new TV. Before operating the set, please read this manual carefully and keep it handy for future reference.
High voltage inside. To prevent the risk of electric shock, do not remove the cover. No user -serviceable parts inside. Refer servicing to qualified service personnel. Do not obstruct ventilation slots in back or base of receiver.
Don't expose the unit in rain or moisture. Don't put water (or any other kind of liquid)-containing vessel on the set to avoid causing fire. Before storming, please unplug the antenna and the power supply from their sockets.
SAFETY CLASS
This is an IEC safety class II (reinforced insulation) product and does not need grounding for safety.
Congratulations on choosing to buy a Tevion product. By doing
so you now have the assurance and peace of mind that comes with
purchasing a product made by one of Europe s leading manufacturers.
All products brought to you by Tevion are manufactured to the
highest standards of performance and safety, and, as part of our
philosophy of customer service and satisfaction, are backed
by our comprehensive 1 Year Warranty.
Please fill in and return the Warranty Card to the address provided.
We hope you will enjoy using your purchase for many years to come.
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 1
Instruction 1
General Information and Safety Instructions 2
Please read these instruction carefully and do accordingly.
TV set requires adequate ventilation. If you place the set near walls, leave sufficient space (15cm) on all sides so that the air can circulate freely. The ventilation slots at the rear of the set can not be covered by curtains, newspapers or any other similar objects.
Do not expose the TV set to direct sunlight or place it near radiator and other similar sources of heat.
TV sets are intended for use in dry rooms. If you wish to use it occasionally outdoors, be sure to protect it against any kind of moisture (rain,splashes, dew and etc.).
Do not put metal and combustibles into the TV through the rear slots to avoid possible fire or shock hazard. Do not place water(or any other kind of liquid)-containing vessel on the set. Do not step on or twist the power cord. A damaged cord may cause fire or shock hazard. Keep any magnetic object away from the TV as far as possible. If there is a lightning storm coming, unplug the TV set and the outdoor antenna. If
any abnormal phenomenon
(smoke, unusual sound, or strange smell), stop using the TV at once. Power
it
off and unplug it.
occurs
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 2
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: Using cabinets or stands recommended by the manufacturer of the television. Only using furniture that can safely support the television. Ensuring the television is not overhanging the edge of the supporting furniture. Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. Not standing the televisions on cloth or other materials placed between the television and supporting furniture Educating children about the dangers of climbing on furniture to reach the television or its controls.
IMPORTANT INFORMATION
To select between 1,2 or 3 digits program numbers
Infrared LED
NUMERIC KEYS
To directly select the program
DIGIT
LOCK
To call up lock menu
CALL
To call up information display
MUTE
To mute the sound or cancel it
MENU
To call up the main menu
VOLUME DOWN(V-)
P.MODE
To select the picture modes
STANDBY
To switch the TV off to standby mode or on to last viewed program
TV/AV
To select signal source
ALT
To return to the last viewed program
SCAN
MUSIC
PROGRAM DOWN(P-)
To select next lower program
GAME
To enter the game or quit
SLEEP
To set sleep timer
VOLUME UP(V+)
PROGRAM UP(P+)
To select next lower program
ZOOM
ZOOM/4:3/16:9
PICTURE
To call up the picture menu
S.MODE
To select the sound modes
S.E: The TV set provides five sound effect for instant selection by touching S.E key. STEREO---HALL---MOVIE---MONO---PSEUDO
S.E
To select the sound effect
S.MODE: The TV set provides five sound modes for instant selection by touching S.MODE key. NEWS---ROCK---POP---JAZZ---USER
NOTE:
To scan trough available channels
To turn the screen off while using the receiver for music playback only.
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 3
Assembly and Part List 3
8m
6m
6m
30
O
30
O
face to infrared sensor
Getting Started 4
To Connect With Terrestrial Signal Source
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied). Perfect picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The exact type and location of the aerial will depend on your particular area. Consult your local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor aerial is not needed. Connect the equipment as in the following figure.
Install the unit where sunlight will not fall upon the screen directly.
Total dark environment or a reflection on the picture screen may cause eyestrain. Soft indirect lighting is recommended for comfortable viewing. Allow enough space between the unit and the wall for proper ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or components.
Notes about using remote control:
1.The batteries have a typical operating
of one yea
r
2.When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries to prevent leakage.
3.Do not drop, dampen or disassemble the remote control.
4.The effective range of remote control is suggested in the left figure.
depending on battery brand and use.
Batter y installation
1.Slide or lift the battery cover from back of remote control.
2.Insert two batteries (1.5V) matching the +/- polarity of the battery to the +/- marks inside the battery compartment.
3.Close the battery cover
.
period
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 4
Features 5
Main Features
Dimensions &. Weights
Aspect Ratio: 4:3 200 Channels Storage Stereo Sound Auto Off without Program Signal 1 RF Input 1 Side AV Input 1 AV Output Games/ Calendar
Main Unit Dimensions 780 (W) x 510 (D) x580 (H) mm Main Unit Weight: 36Kgs
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 5
TV/AV
P-
V-
V+
MENU
P+
P-
1 2 3
4 5 6
7 8 9
-/--
0
V-
V+
P+
V- V+
P- P+
P-
V-
V+
MENU
P+
0
AV1
SVHS
Instructions 6
AV2
YUV
Press the TV/AV key to select the video source.
Press the V+/V- key to adjust the volume.
Directly selecting
To select a one-digit number program, press the digit key to display"-" and then input the number directly with one of the numeric keys(0-9). When the number is between 10 and 99, press the digit key to display "--" and then input two numbers with the numeric keys. When the number is between 100 and 199, press the digit key to display "1--" and then input two numbers with the numeric keys. Note: When you are in multi-digit mode(the display is "--")and the digits are not fulfilled(for example, "2_","12_" ), the channel will not be changed.
Press the P+/P- keys to select the next higher/lower program.
Sequentially selecting
To power up the TV, press the power switch located on the bottom-right of the cabinet. The power indicator lights red and the last viewed program appears. If the power indicator lights up but no picture appears, the TV may be in standby mode. To turn the TV on, you can do the following:
1.Press the standby key on handset to get into the last viewed program.
2.Press one of Numerical keys on handset to get into the selected program.
3.Press the P+/P- keys on front panel. When the TV is on, press the standby key to swap the TV to standby mode or press power switch to power it off completely. Note:
1. If a power failure occurs when the TV is on, press the power switch to cut off from the power supply to avoid possible hazard to the TV which may be caused by a high voltage pulse when the power supply restores.
2.The TV set has AUTO SWITCH OFF function, which cause the TV to standby mode after about 15 minutes of no incoming signal and no operation.
3.Standby mode: Use to turn off TV for a short period of time. If you do not intend to use the TV for a long period of time it is best to turn it off from the power switch on the television set.
You can view images from different sources connected to your TV, such as free to air television, VCR,DVD or Digital
Television set top box.
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 6
MUTE
ALT
P
¿
Using the P+/P-/V+/V- keys to move the boxman.
Four different groups of picture settings can be selected by pressing this button
Cyclally
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 7
Instructions 6
MENU
MENU
Press MENU key to call up Time menu as shown below:
Press the P+/P- keys to select the desired item and activate it with the V+/V- keys. The items in this Time menu are explained in detail as follows. 'CLOCK', used to set current time. 'ON TIME', used to set the time of TV powering on. 'OFF TIME', used to set the time of TV powering off. 'PROGRAM', used to set the number of the current program when TV powering on.
CLOCK 00:00
OFF TIME --:-­ON TIME PROGRAM 0
--:--
Time
PICTURE ENHANCE ON CURTAIN ON CALENDAR
BLACK SCREEN ON
2004 JAN SU MO TU WE TH FR SA 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Press MENU key to call up Setup menu as shown below:
Press the P+/P- keys to select the desired item and activate it with the V+/V- keys. The items in this Setup menu are explained in detail as follows. 'PICTURE ENHANCE', set "ON" use to improve the picture quality. 'BLACK SCREEN',set "ON" used to set "screen black " when selecting the program. 'CURTAIN', setting "ON" enable a curtain up/down effect when turn on/off the TV by remote control. 'CALENDAR', used to see date. You can use V+/V- keys to change "month" and P+/P- keys to change "year".
Setup
PIN ----
LOCK
LOCK OFF
PROGRAM 0 CHILD LOCK OFF HOTEL MODE OFF VOLUME LIMIT 30 PLUG & PLAY OFF CHANGE PIN
NEW PIN ----
CONFIRM ----
Press LOCK key and input the PIN to call up Lock menu as shown below:
Note: The primary PIN is '0000'. The super PIN is '4100 '.
LOCK
CHANGE PIN
Press the P+/P- keys to select the desired item and activate it with the V+/V- keys. The items in the LOCK menu are explained in detail as follows. ' LOCK' , set LOCK on to restrict unauthorized changes to some setting of your TV, such as program stored in memory. ' PROGRAM' , displays the number of the current program. ' CHILD LOCK' ,when set "ON"used to limit the current program not to be viewed. ' HOTEL MODE' , set "ON" used to activate the 'VOLUME LIMIT' function. ' VOLUME LIMIT' , used to set maximum volume range when HOTEL MODE is "ON". ' PLUG & PLAY' , to set the TV to run 'auto search' and 'store' function when switching on unit. ' CHANGE PIN' , used to set your own PIN with numeric keys on remote control handset.
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 8
Instructions 6
MENU
MENU
MENU
Press the P+/P- keys to select the desired item and press V+/V- keys to adjust it.
Press the P+/P- keys to select the desired item and press V+/V- keys to adjust it with the keys to customize the picture to your preference.
Press MENU key to call up Sound menu as shown right:
Sound
VOLUME 30
BASS 50 TREBLE 50 BALANCE 0 AVL ON
Press MENU key to call up Picture menu as shown right:
Picture
BRIGHT 75
CONTRAST 75 COLOR 50 SHARPNESS 50 WHITE TONE NORMAL
Press MENU key to call up Preset menu as shown below:
Preset
PROGRAM 0
AUTO STORE SEARCH FINE TUNING PROG EDIT SKIP OFF
The items in this Preset menu are explained in detail as follows. 'PROGRAM', presents the number of the current program. 'AUTO STORE', Press V+ key to start it. The TV will search through out the whole channel coverage and store those in which program is transmitted in sequential programs(as many as 200)automatically. 'SEARCH', used to manually tune in individual channels to a specific program number. This function can also be used if tuning in a VCR. 'FINE TUNING', when the AUTO STORE or SEARCH can not precisely located the program due to bad picture or sound quality which is caused generally by poor or nonstandard signal, you can use FINE TUNING to manage optimal effect. 'PROG EDIT',used to swap channel to certain program as you like. 'SKIP', used to skip current program when changing stations using the P+ / P- buttons. Note: Preset the COLOUR and SOUND system before starting search(refer to the station or other organization). The preset menu will not usable when TV locked(refer to the LOCK menu).
Preset
* AUTO STORE *
PROGRAM 0
COLOR SYSTEM AUTO SOUND SYSTEM B/G START
Preset
* SEARCH *
PROGRAM 0
COLOR SYSTEM AUTO SOUND SYSTEM B/G BAND VHF-L SEARCH
Preset
* FINE TUNING * COLOR SYSTEM AUTO
SOUND SYSTEM B/G TUNING
PROGRAM 0
Preset
* EDIT PROG *
PROGRAM 0
TO 1 SWAP
Press the P+/P- keys to select the desired item and activate it with the V+/V- keys.
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 9
Instructions 6
FAQ 7
Be sure the power cord is plugged in. The sound volume is adjusted to the minimal or in mute position.
May be pulse interference from nearby cars, motorcycles, electric trains, high tension lines, neon signs, hair dryers, etc
.
May be radio interference form nearby TV receivers, personal computers, and TV games, or radio station.
May be due to broadcast waves reflected from nearby mounts and high buildings. Check if the direction of aerial has been deflected because of strong wind, etc.
The aerial lead-in may be broken or disconnected. Check if the direction of aerial has been deflected because of strong wind, etc.
The batteries maybe have worn out
.
The batteries may be improperly installed.
May need to adjust contrast, color and tint. Also try fine tuning the stations. (Ref to page 8)
Try re-tuning in stations.
Can be caused by magnetic interference. Ensure to unplug the TV Set from the power point for approximately 8-10 hours.
Clean both,remote controller handset and front panel receiver windows.
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 10
simple problems not caused by the units itself.
Before calling the service personnel, please check the information below to fix some
Questions
I have no picture and no sound I have normal picture but no sound I have poor color, contrast and tint
I have spots on screen
I have lines on screen
I have double/ Triple image
I have snowy picture
My remotes operation distance reduced
My remote control does not work
I have green/purple spots
Answers
Y
Cb
Cr
AV-IN
AV-OUT
YUV
V
L
R
V
L
R
Other Useful Information 8
S-VIDEO INPUT
usin g S-video line
S-VIDEO output
S-Video
1.When the TV is in YUV(YCbCr) and SVHS mode, there is no signal output in the output terminals.
2.The following figures are only for reference, please refer to the instruction includes with your DVD or VCR for direction on how to connect those to units your TV.
DVD/Digital TV receiver
DVD/Digital TV receiver with YCbCr
Input
AUDIOR L VIDEO
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 11
Warranty Card 9
Congratulations!
You have made an excellent choice with the purchase of this quality product.Our commitment to quality also includes
our service.Should you,contrary to expectations,experience defects due to manufacturing faults during private use within the warranty period from the date of purchase we shall be liable for warranty in accordance with statutory warranty regulations provided that:
Subject to the warranty repair conditions below, this product is warranted for the specified period of 12 months from the original date of purchase covering both parts and labour.
The benefits conferred by this warranty are in addition to and not in derogation of all rights and remedies in respect of this product which the consumer has under the Trade Practices Act and other State and Territory laws.
Warranty Repair Conditions
E. The AWA Service Centre and its Authorised Service Centres may charge for work done where the product is found to be in good working order. Example, charges may be made where the problem is found to be due to incorrect setting of customer controls, use of poor associated equipment (e.g. poor antenna systems) or the inability of the product to operate with faulty or incompatible equipment.
F. If the product is sent to an Authorised Service Centre, the owner is responsible for the cost of transport to and from the Service Centre. In addition, the product is at the owners risk while in transit to and from the authorised Service Centre.
G. No person is authorised to make or give any assertions, statements or undertakings, whether expressed or implied about the product other than or additional to the terms of this warranty.
A. This warranty only applies provided the product:­ Has been purchased in Australia and sold by Authorised Distributors or Dealers and only where the products are used and serviced within Australia Is taken for service when required to an Authorised Service Agent, together with written instructions indicating speci?c problem or function requiring investigation. Has valid proof of purchase and presented when warranty service is requested. Has only been used in a domestic application. Has been installed and operated in accordance as noted in the operating instructions under normal use and reasonable care (in the opinion of the Service Centre). Has not been damaged by the use of accessories which in the opinion of the Service Centre are defective or incompatible with the product. Has not been tampered with or repaired (including unauthorised alterations) by anyone other than the AWA Service Centre or an Authorised Service Centre.
B. The warranty does not cover:- Damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accidental damage, misuse, neglect, build-up of dirt or dust abuse, wear and tear, maladjustment of customer controls, mains supply problems, thunderstorm activity or Acts of God, pixel error, infestation by insects or vermin, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product. Mileage or travelling time in respect of service outside the authorised AWA Service Centre nor pick up and delivery cost incurred. Service calls arising from failure to correctly operate the product or to observe noted instructions, or repair which reveals the product is in normal working order. Cabinet parts, user replacement batteries or leads unless the defective items are reported at the time of purchase.
C. Service calls only apply to Television display devices (CRT, LCD, Plasma) with screen sizes greater than 59cm in the major metropolitan areas of Australia or the normal operating areas of the nearest Authorised Service Centers.
D. Requested service visits to the customer premises will be made during normal working hours of the customary working week upon request by the customer. Where such a visit is made on a day arranged by the customer and the service technician is unable to obtain access to the product, the Service Centre will be entitled to make a separate charge for service call fee, time and distance travelled.
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 12
YEAR WARRANTY
1
Warranty Card 9
Warranty Details
Product Name 68cm Colour Television Brand Name TEVION Product Number 5359 Model Number TV29BWC Serial Number Name Address Email DaytimeTel No Date of purchase
We recommend that you attach your product receipt, showing the date of purchase, to this Warranty Card and keep for your reference.
In the event of a product fault, please call the After Sales Support telephone number. Please ensure that you have the product details(as shown on this card)at hand so that we are able to respond as quickly and efficiently as possible.
Helpline reference number
Please read instruction manual carefully
Should you encounter any problems?
DO NOT RETURN THIS PRODUCT TO THE STORE OF PURCHASE
Please contact the AWA Customer Service Centre
1300 366 144
Email: warrantyhelp@awa.com.au
The original proof of purchase must be kept and produced for service requirements.
AFTER SALES SUPPORT
1300 366 144
warrantyhelp@awa.com.au
TEL: 1300 366 144 WEB: warrantyhelp@awa.com.au 13
Loading...