Tevion PA0004R Quick Setup Manual

USB Docking Station for iPod / iPhone / iPad

Quick Set Up Guide • Easy steps to getting started

Model Number PA0004R

Product Number 36986

After Sales Support
Tel: [phone] Web: www. winplus.com.au

USB Docking Station for iPod / iPhone / iPad

What your 1 year warranty means

Great care has gone into the manufacture of this product and it should therefore provide
you with years of good service when used properly. In the event of product failure within
its intended use over the course of the first 1 year after the date of purchase, we will
remedy the problem as quickly as possible once it has been brought to our attention.
In the unlikely event of such an occurrence, or if you require any information about the
product, please contact us via our after sales support services, details of which can be

found in this manual and on the product itself.

Instructions

Made for: iPod touch (2nd and 3rd generation), iPod classic, iPod with video, iPod nano
(4th and 5th generation), iPhone 4, iPhone 3GS, iPhone 3G, iPhone, iPad, iPad 2.

Step 1: If your device has a case/cover, remove this before connecting to dock.
The docking station is designed specifically for Apple product sizes; covers will
prevent the 30-pin connector from making a good connection

Step 2: Connect USB plug (a) into an available USB socket (computer USB
or 240V USB adapter)

Step 3: Connect device to the 30-pin connector (b)

If charging doesn’t initiate immediately, try the following solutions:

• Check the power on indicator LED (c) is active on the docking station, ensure your
computer/wall adapter is plugged in and turned on

• Follow steps 2-3 again, verifying good connections are made between each
component or device

Note: iPad and iPad 2 require a wall adapter in order to charge device; computer USB
does not supply sufficient current to charge.

Internal cable
housing cover (on
underside of product)

USB plug (a)

Back Cradle:

To dock iPod / iPhone / iPad

Front Dock:

To sync iPod / iPhone / iPad

30-pin connector (b)

LED power indicator (c)

Cable

Front Dock

Back Cradle