The Sounddeck is designed for the
playback of music and speech transmitted via cable from an external
player or via Wi-Fi.
Only use the device as described in
this quick reference guide and the
online documentation. Any other use
will be deemed as not in accordance
with the instructions and may lead to
damage of property or even persons.
The manufacturer accepts no liability
for damage caused by improper use.
The Sounddeck is intended for
private use.
Safety notes
The enclosed brochure “Important product information” contains
general safety notes which you
should always observe to protect
yourself and third parties. Also be
sure to observe any warning notes
contained in this quick reference
guide.
guide and the online documentation
carefully. Only in this way, can you
ensure that all functions are used in a
safe and reliable manner.
Keep the enclosed documents in a
safe place and also be sure to pass it
on to any subsequent owner.
Before operating the product,
please first read the safety
notes, this quick reference
2 • Sounddeck
195480_GB_20170619.indd 220.06.17 12:52
Page 3
Unpacking
Package contents
(1) Sounddeck
(2) Wireless remote control
(3) Mains cord
(4) HDMI cable
(5) Brochure “Important product
information”
• Check that all items have been
delivered and that nothing is
damaged. If you find any damage,
do not operate the device; instead
contact our customer service
department (see back side).
• Please keep the packaging for the
duration of the warranty period.
(1)
(2)
(3)
(4)
(5)
2 3 4
AUX OPTTV
1
Important Product Information
Safety notes
Wichtige Produktinformationen
Notas de seguridad
Información importante del producto
Sicherheitshinweise
Informations produit importantes
Consignes de sécurité
Informazioni importanti sul prodotto
Viktig produktinformation
Note relative alla sicurezza
Vigtige produktinformationer
Säkerhetsanvisningar
Viktige produktinformasjoner
Sikkerhedshenvisninger
Tärkeitä tuotetietoja
Sikkerhetsinstrukser
Ważne informacje produktowe
Belangrijke productinformatie
Turvallisuusohjeita
3 • Sounddeck
195480_GB_20170619.indd 320.06.17 12:52
Page 4
(13)
(14)
(12)(11)(10)(9)(8)(7)(6)
(6) Setup button: push during the
setup process once asked to do
so.
(7) Reset button: hold for 8 seconds
while the device is on to reset
the Sounddeck to the factory
default settings.
(8) Audio input for a TV set via
)
HDMI-ARC *
. Make sure to use
the HDMI ARC jack on your TV
set and to you enable the CEC
function. You will find more information about this in the user
manual for your TV set.
(9) Ethernet connection: for
connecting the Sounddeck with
your router via an ethernet cable
(alternatively to the Wi-Fi).
(10) USB 2.0 jack: for restoring the
)
firmware and sharing music **
.
(11) Optical audio input (digital),
e.g. for a TV set without an ARC
)
function *
.
(12) RCA audio input (analogue) for
external players, e.g. a smartphone via the headphone jack
or a TV set without an ARC
function*).
(13) Main power switch
(14) Mains connector jack for the
mains cord.
)
*
The audio signal must be set to
the output format PCM or Stereo
in the sound settings for the TV
set or the set top box. You can
find further notes about this topic
in our online documentation:
http://manual.teufelaudio.com/
sounddeck.
**) Music saved on a USB stick will
be made available under “My
music” if the stick is connected to
the USB port of the host device.
In the network settings, you can
see which device acts as a host
in your system.
4 • Sounddeck
195480_GB_20170619.indd 420.06.17 12:52
Page 5
(15)(16) (17)
(15) Increase/decrease the volume
(16) Control LEDs
(17) On/Off button
Wireless remote control
(18) (19)(20)
1
234
(21)
(27)
(26)
AUXOPTTV
(22)
(23)
(24)
(25)
(18) On/Off button
(19) Control LED
(20) Mute
(21)
In streaming mode: Preset
buttons (see page 10)
. Other-
wise wave field sound patterns:
a
Stereo mode: Pure stereo
sound.
b
Arena mode: panorama
sound with extra wide effect.
c
Theatre mode: stage with
extra wide effect and at the
same time clear speech
playback.
d
Voice mode: extremely clear
speech playback.
(22) Select an input: OPTICAL (11)
(23) Select an input: HDMI ARC (8)
(24) Next/previous track (only in
streaming mode)
(25) Increase/decrease the volume
(26) Select an input: Streaming
(27) Select an input: AUX IN(12)
5 • Sounddeck
195480_GB_20170619.indd 520.06.17 12:52
Page 6
Preparations
To be able to integrate Teufel
Streaming products with Raumfeld
technology in your network and
to ensure smooth operation, we
recommend an up-to-date, high
performance router with a broadband
Internet connection.
Setup
• The perfect spot for the Sounddeck
is in a central position under the
TV.
Please note that obstacles
such as walls and ceilings
may affect signal transmission.
Make sure that the Wi-Fi router is
active, has the latest firmware and is
able to access the Internet.
To the extent possible, the router
should be positioned in the middle
of your home in order to ensure an
adequate Wi-Fi signal throughout
your home.
6 • Sounddeck
195480_GB_20170619.indd 620.06.17 12:52
Page 7
Alternative connections if the TV set does not support “ARC”.
Connection Examples
TV set
LINE OUT
HDMI ARC:
Recommended
connection if the
TV set supports
“ARC”. “CEC”
must be enabled
on the TV set.
HDMI
ARC
OPT
Sounddeck
You can find further tips
and infos here:
http://manual.teufelaudio.com/
sounddeck
195480_GB_20170619.indd 720.06.17 12:52
7 • Sounddeck
Page 8
Configuration
• Make sure that your smartphone or
tablet is registered on your home
Wi-Fi.
• Have the Wi-Fi password for your
router ready.
• Load the TEUFEL RAUMFELD APP
from the Play Store/App Store.
• Once you have started the app, the
setup wizard will guide you through
the setup process.
• You can find further notes about
setting up your Teufel streaming
system under http://manual.
teufelaudio.com/setup. The tips
in chapter „Trouble shooting“ on
page 11 should also be helpful.
TEUFEL RAUMFELD APP
IN THE APPLE APP STORE
TEUFEL RAUMFELD APP
IN THE GOOGLE PLAY STORE
Integration of other devices
in an existing Teufel
streaming system:
‒ You do not have to set up
the entire system again. You
can use the app to add new
devices (under “Settings”).
8 • Sounddeck
195480_GB_20170619.indd 820.06.17 12:52
Page 9
Wireless Remote Control
The remote control must be
connected to the Sounddeck during
initial installation.
1. Pull out the plastic strip on the
bottom of the remote control.
2. Now hold the remote control in a
central position directly in front of
the Sounddeck.
3. Hold the buttons a and d on the
remote control down at the same
time until the LED (19) blinks three
times. If instead the LED blinks ten
times in a row, repeat the process.
1
234
AUXOPTTV
9 • Sounddeck
195480_GB_20170619.indd 920.06.17 12:52
Page 10
Operation
Sound settings
Your Sounddeck has 4 different
sound settings, which have been
tuned by our acoustic technicians
here in Berlin using wave field technology. Wave field technology makes
it possible to strategically control the
drivers in the Sounddeck creating
very broad spatial playback effects.
With audio playback (via ARC,
OPTICAL or AUX), you can conveniently configure the desired sound
pattern with the remote control
buttons a to d:
Button a: Stereo mode
The acoustics resemble the sound
of a classic stereo system. Select
this mode to generate a pure stereo
experience.
Button b: Arena mode
Panorama sound with an extra wide
effect is achieved through lateral
signal output.
Button c: Theatre mode
The theatre mode creates a stage
with a wide effect and clear speech
playback at the same time.
Preset buttons
In streamining mode (streaming via
LAN/Wi-Fi), the buttons a to d act
as programmable preset buttons.
They allow you to access your
favourite radio station, a playlist or
any other music with just the push of
a button.
Programming preset buttons
1. Make sure that the Sounddeck is
operational.
2. Use the Teufel Raumfeld app to
play any music on your Sounddeck
(e.g. a radio station, an album, a
playlist or all tracks of an artist).
3. As soon as the music is played
back, push a preset button and
hold it until you hear a signal tone.
The music that is played back is
now saved for this preset button.
Accessing saved content
• Tap the preset button to access
saved music with just the push of
a button and to play it back on the
Sounddeck.
Button d: Voice mode
The frequency ranges for speech
playback are increased in this mode.
The side drivers are only used to a
limited degree to expand the sound
stage.
10 • Sounddeck
195480_GB_20170619.indd 1020.06.17 12:52
Page 11
Trouble shooting
The following advice should help you to solve problems. If this does not work, our
online documentation will provide help:
http://manual.teufelaudio.com
ProblemPossible cause/solution
The LED (16) on
the front side is
not illuminated.
Setup fails.
The app is not
connected or
fails to locate
the configured
streaming
devices.
The Sounddeck
does not emit
any sound in TV
mode or playback stutters.
Make sure that power is supplied. Check to make sure that
the mains cord is securely seated. Check whether the mains
switch (13) on the back side is switched on.
Restart your router and your smartphone or tablet.
Set up the device near your router and switch any repeaters
off for the duration of the setup process. If your router
provides guest access, do not use it to connect your Teufel
streaming devices.
Read the notes in our online documentation at: http://
manual.teufelaudio.com/setup.
Make sure that the Teufel streaming devices and the smart
device are operated with the Teufel Raumfeld App on the
same Wi-Fi. Restart your router. Briefly disconnect your Teufel
streaming devices from the power supply and then start them
again.
You can find more information in our online documentation:
http://manual.teufelaudio.com.
If you are operating the Sounddeck with a TV via the digital
output (HDMI ARC or OPTICAL), you have to set the output
mode to “PCM” in the TV settings for the selected TV output.
You can find more information in our online documentation:
http://manual.teufelaudio.com/sounddeck.
11 • Sounddeck
195480_GB_20170619.indd 1120.06.17 12:52
Page 12
Music playback
skips or is interrupted.
I would like
to reset the
Sounddeck.
It is possible that one or more Teufel device(s) do not have a
Wi-Fi signal or it is too weak.
Place the devices closer to the router, try alternative setup
locations or connect devices, which are set up far away, with
an Ethernet cable.
As a test, refrain from using repeaters. If applicable, use an
audio stream with low resolution.
Also visit the website of the router manufacturer for tips on
how to improve your Wi-Fi.
You can find more information in our online documentation:
http://manual.teufelaudio.com.
Notice: By resetting the device, all system configuration
settings will also be reset.
Resetting the device: When the device is switched on, use
a paper clip that has been bent straight to push the reset
button (7) and hold it down until the device restarts (for at
least 8 seconds).
12 • Sounddeck
195480_GB_20170619.indd 1220.06.17 12:52
Page 13
Declaration Of Conformity
Lautsprecher Teufel GmbH hereby declares that this product complies
with the requirements of the directives 2014/30/EU, 2014/35/EU
and 2014/53/EU to the extent they are installed and used in accordance with the instructions of the manufacturer. The full text of the EU declaration
of conformity is available at the following Internet address: