The information in this
document may change
without prior notice and
in no way constitutes any
liability on the part of Lautsprecher Teufel GmbH.
No part of this user manual
may be reproduced in any
form or be broadcasted
in any way electronically,
mechanically, by photocopy
or recording without the
written permission of Lautsprecher Teufel GmbH.
The Bluetooth®
word mark and Bluetooth®
symbol are registered trademarks of Bluetooth SIG, Inc.
and any use by Lautsprecher Teufel is licensed.
Original packaging
If you wish to exercise your
eight-week right of return,
we ask that you be absolutely sure to hold onto the
packaging. We can only
accept the return of the
speakers WITH THE ORIGINAL PACKAGING.
Empty boxes are not available!
• Motiv Go
3
Page 4
Complaints
In case of a complaint we
will need the following
information to process your
enquiry:
1. Invoice number
Can be found on the sales
slip (enclosed with the
product) or on the order
confirmation received as a
PDF document.
2. Serial number or batch
number
Located in the cover of the
connections for AUX and
power supply.
Thank you for your support!
Contact
Please contact our
customer service department with any questions,
suggestions, or complaints:
Lautsprecher Teufel
GmbH
BIKINI Berlin
Budapester Str. 44
10787 Berlin (Germany)
Telephone:
00800 200 300 40
(toll- free)
Fax:
+49 30 300 930 930
Online support:
www.teufelaudio.com/
service
Contact form:
www.teufelaudio.com/
contact
4
• Motiv Go
Page 5
Proper use
The speaker, which is
protected against water
jets according to IPX5, is
designed for the playback
of music and speech from
an external player via
Bluetooth®.
Only use the speaker as
described in this user
manual. Any other use
will be deemed as not
in accordance with the
instructions and may lead
to damage of property or
even persons.
The manufacturer accepts
no liability for damage
caused by improper use.
The speaker is intended for
private use.
Before operating
the speaker, please
read the safety
notes and user manual
carefully. Only in this way,
can you ensure that all
functions are used in a safe
and reliable manner. Store
the user manual in a safe
place and also be sure to
pass it on to any subsequent owner.
• Motiv Go
5
Page 6
For your safety
Signal terms
You can find the following
signal terms in this user
manual:
WARNING
This signal term indicates a moderate risk,
which, if not avoided,
may result in death or
severe injury.
CAUTION
This signal term
indicates a low risk,
which, if not avoided,
may result in minor or
moderate injury.
NOTICE
This signal term
warns you of potential
damage.
6
• Motiv Go
Page 7
Safety notes
This chapter contains
general safety notes which
you should always observe
to protect yourself and
third parties. Also observe
the warning notes in each
chapter of this user manual.
WARNING
Touching live parts can
result in severe injury or
death.
– When connecting the
mains adapter, make
sure that the correct
voltage is present. You
can find more information
about this on the rating
plate.
– Check the device regu-
larly for damage.
Do not use the device if
its housing is defective
or exhibits other visible
damage.
– This device can only be
completely disconnected
from the grid by pulling
the mains adapter. Therefore, make sure that the
mains adapter is always
easily accessible.
– If the device emits smoke,
smells burnt or produces
unusual sounds, immediately disconnect it from
the mains and do not
operate it further.
– Never open the device
housing.
Repairs may only be
carried out by an authorised specialist workshop.
Only parts that match the
original specifications
may be used.
– Only use the accessory
products specified by the
manufacturer.
– Never modify the device.
Unauthorised modifications may affect the
safety and functionality.
• Motiv Go
7
Page 8
WARNING
An unsuitable setup location may result in injury
and damage.
– If the speaker is not
securely mounted, do
not use it in vehicles, in
unstable locations, on
wobbly tripods or furniture, on underdimensioned brackets etc. The
speaker may tip or fall
over and cause injury to
persons or be damaged
itself.
– Position the speaker in
such a way that it cannot
be knocked over inadvertently and make sure
that the cables do not
pose a tripping hazard.
– Do not use the device
in environments where
there is a risk of explosion.
– Only use the Bluetooth
function in locations
where wireless radio
transmission is allowed.
®
WARNING
Children can become
trapped in the plastic
wrapping when playing
and suffocate.
– Do not allow children to
play with the device or the
plastic wrapping. There is
a danger of suffocation.
– Never allow children to
operate electrical equipment unsupervised.
WARNING
Lithium rechargeable
batteries can explode if
handled improperly.
– You must not heat or
short circuit rechargeable
batteries or dispose of
them in fire.
– Do not expose the
rechargeable batteries to
direct sunlight.
– Do not place the speaker
near heat sources (e.g.
heaters, ovens, other heat
generating equipment
such as amplifiers etc.).
8
• Motiv Go
Page 9
CAUTION
Extended listening
at high volumes may
lead to hearing loss.
To avoid damage to health,
avoid extended listening at
high volumes.
– When the volume is
set high, always keep a
certain distance from the
device and never place
your ears directly on the
speaker.
– If a speaker is set to full
volume, this may produce
very high sound pressure.
This may have psychological consequences and
also cause physical injury.
Children and pets are
particularly at risk. Set
your signal source device
volume control to a low
setting before turning on
the power.
CAUTION
This product contains
magnetic material.
– If necessary, consult
your physician and ask
for effects on implants
such as pacemakers or
defibrillators.
• Motiv Go
9
Page 10
NOTICE
The Motiv Go is protected
against water jets (IPX5).
– The jet water protec-
tion according to IPX5
is only effective if the
cover cap (15) is firmly
closed.
– Normal rain and a few
splashes from showering
won’t cause any damage,
but you should avoid
spraying it directly with a
hose.
– If the Motiv Go falls into
a rain puddle or an other
flat water body, nothing
will happen if you recover
it right away. However,
the device is not suitable for a splashdown or
diving!
– You should generally
avoid contact with salt
water.
NOTICE
Gross misuse and incorrect care are the main
reasons for damage
to high-performance
rechargeable batteries.
– Avoid deep discharge of
under 10 % for optimal
rechargeable battery
power.
– Recharge your recharge-
able battery frequently.
– Store your rechargeable
battery in a cool but
frost-free area, ideally at
15 °C. Higher temperatures result in a higher
rate of self-discharge
and shorten the intervals
between charges.
– Do not expose the
rechargeable battery to
direct sunlight or other
sources of heat.
This applies in particular
when charging the battery.
10
• Motiv Go
Page 11
– A deep discharge
damages the rechargeable battery cells. The
most frequent cause
of deep discharge is
prolonged storage or
failure to use a partially
discharged rechargeable
battery. Only store the
rechargeable battery
once it is fully charged.
Old devices must not
be disposed of with
household waste!
If the Motiv Go is no
longer operational, every
consumer is required by law
to dispose of used devices
separately from household
waste, e.g. at a collection
point run by the communal
authority/borough. This
ensures that old devices are
recycled in a professional
manner and also rules out
negative consequences for
the environment.
For this reason, electrical
equipment is marked with
the adjacent symbol.
• Motiv Go
11
Page 12
Package contents
(1) Motiv Go
(2) Mains adapter
• Check that all items have
been delivered and that
nothing is damaged. If
you find any damage, do
not operate the device;
instead contact our
customer service department (see „Contact“ on
page 4).
• Please keep the packaging for the duration of
the warranty period.
(1)
(2)
Controls and connections
(4)(6)
(3)(5)(7)(8)(9) (10) (11)
(12)
12
• Motiv Go
(13)
(14)
(15)
12V 2.5A
AUX IN
(16)
(17)
Page 13
(3)
Push and hold
for
2 seconds: turn the
device on and off;
tap during operation: display battery
level with LED (4)
(4) LED indicator for
charging and battery
charging level
activate/deactivate
(5)
Dynamore® stereo
widening
®
(6) Dynamore
(7)
control Bluetooth®
LED
device: skip back
(8)
Tap
: playback/
pause;
long push: activate the
smartphone’s voice
assistant;
briefly push in the
event of a phone call:
accept call/hang up;
long push (2 sec.):
reject call
(9)
control Bluetooth®
device: skip forward
(10) – decrease the
volume
(11) + increase the volume
(12) Microphone
(13)
briefly push
: select
the Bluetooth® source
and switch between
two BT devices;
push and hold for 2
seconds: start Bluetooth® pairing;
push and hold for
10 seconds: clear all
Bluetooth® connections
®
(14) Bluetooth
LED
(15) Cover cap
(16) Mains adapter
connection
(17) AUX IN, stereo input
with a 3.5 mm jack
plug socket
• Motiv Go
13
Page 14
The rechargeable battery
CAUTION
Batteries (particularly
lithium batteries)
can explode if used
improperly.
– You must not heat
or short circuit
rechargeable
batteries or dispose
of them in fire.
– Do not expose
the rechargeable
batteries to direct
sunlight.
• Before first use, charge
the rechargeable battery
for approx. 3 to 4 hours.
• Use the enclosed mains
adapter (2) for charging.
• The fully charged
rechargeable battery
provides an operating
time of approx. 12 hours
at medium volume.
Charging the battery
CAUTION
If the device is wet, a
short circuit can occur
during the charging
process.
– Let the device dry
completely before
charging.
(3) (4)
12V 2.5A
AUX IN
(16)
(2)
14
• Motiv Go
Page 15
The integrated Li-Ion
rechargeable battery is
charged as soon as the
Motiv Go is supplied with
power from the mains adapter
(2) via the connection (16).
The LED (4) signalise the
charging process:
If the Motiv Go is switched
on during the charging, the
LED is pulsing in white.
If the Motiv Go is switched
off, the LED shows the
charging state in color:
45-99%LED pulsing
green
11-44%LED pulsing
yellow
<11%LED pulsing red
When the battery is fully
charged, the LED lights up
green continuously.
Room temperature is ideal
for charging the rechargeable battery. In an excessively cold or hot environment, the rechargeable
battery doesn’t reach its full
capacity during charging.
Charge level
You can display the battery
charge level by tapping the
button (3):
45-100%
21-44%LED (4) lights
11-20%Warning tone,
<11%Warning
To protect the
rechargeable battery,
the Motiv Go has deep
discharge protection, which
switches the device off once
the threshold is reached.
In this case, the Motiv Go
can not be switched on
again.
LED (4) lights
up green
up yellow
LED (4)
flashes red
slowly
(1/second)
tone, LED (4)
flashes red
quickly
(2/second)
• Motiv Go
15
Page 16
Setup
NOTICE
In case of very high
volumes and bass-accented music, the
device may move.
– Therefore, always
make sure that the
device is securely
positioned. There
is no warranty for
damages caused by
falling or dropping
down.
Location tips
• Select a stable, level
base.
• Select a location away
from heat sources and
direct sunlight.
• If applicable, lay the
connector cords so that
they do not pose a tripping hazard.
• Do not place any objects
on the Motiv Go.
You can simply place the
Motiv Go on a stable, level
surface.
16
• Motiv Go
Page 17
Operation
CAUTION
Extended
listening at high
volumes may lead to
hearing loss.
– To avoid damage
to health, avoid
extended listening at
high volumes.
– When the volume is
set high, always keep
a certain distance
from the device and
never place your
ears directly on the
speaker.
– If a speaker is set to
full volume, this may
produce very high
sound pressure.
Set your signal
source device
volume control to a
low setting before
turning on the power.
NOTICE
If the device is
subjected to warm
temperatures after
being cold (e.g. after
transport), condensation may occur inside
of it.
– In this case, wait at
least 2 hours before
you connect and
activate it.
• Motiv Go
17
Page 18
Activating and deactivating
– To activate the device,
push and hold the
button (3) for approx.
2seconds.
The Motiv Go is switched
on with a signal tone and
the
LED
(4) will briefly
illuminate to
battery charge level (see
page 15)
indicate the
.
(4) (6)
Volume
The volume setting
of the external player
affects the volume of the
Motiv Go.
– With the buttons – (10)
and +(11) you can
decrease or increase the
volume.
You can gradually adjust
the volume by tapping.
Pushing and holding
will change the volume
continuously.
(3) (5)
– To deactivate the device,
push and hold the
button (3) for approx.
2seconds.
The Motiv Go is switched
off with a signal tone and
LED (4) briefly shows
battery charge level
Auto off
• In battery mode the device
will automatically switch to
standby if no input signal
is received for 20 minutes.
18
(10) (11)
the
.
• Motiv Go
Dynamore
Dynamore® is a technique
that makes the distance
between the front speakers
sound wider. This generates
an impressive, spatial and
wide-ranging sound.
– Use the button
switch stereo widening on
and off.
LED (6) lights up red, if
Dynamore is switched on.
®
(5) to
Page 19
Bluetooth
®
Via Bluetooth®, you can
connect a compatible
external player and the
Motiv Go wirelessly. The
audio output of your
external player is then
emitted by the Motiv Go.
You can also register two
Bluetooth devices and have
them played in alternation.
For smartphones with an
Android or IOS operating
system, you can also use
the voice assistant via the
Motiv Go.
NOTICE
Only use the Bluetooth® function in locations where wireless
radio transmission is
allowed.
Bluetooth® options
Depending on the device
type, your external player/
smartphone may also have
a number of Bluetooth
®
options such as media playback and call function.
You can find more information about the Bluetooth
®
options in the user manual
for your external player/
smartphone.
Pairing
To play the audio of your
external player on your
Motiv Go via Bluetooth
®
,
you must first connect the
devices with each other.
This is called “Pairing”. The
Motiv Go can save data
from up to seven external
players, which can be
subsequently connected to
without having to repeat the
pairing process.
1. Turn on the Bluetooth
®
function on your external
player (e.g. smartphone).
• Motiv Go
19
Page 20
2. Push the
button (13)
and hold it for approx.
2seconds.
(13)
(14)
You will hear a connection tone and the Bluetooth® LED (14) will flash
in blue.
3. Let your external player/
smartphone scan for
Bluetooth
will find more information
about this in the user
manual of your external
player.
After the search run, the
“Teufel MOTIV GO” should
also be present in the list
of detected devices.
4. Select “Teufel MOTIV GO”
from the list of detected
devices.
Pairing is now complete
and the Bluetooth
(14) lights up permanently.
®
devices. You
®
LED
Your Motiv Go will now act
as a Bluetooth
device and will play back
music that would otherwise be played by your
external player/smartphone.
5. If you would like to pair a
second external player,
repeat steps 1 to 4 with
the second device. Now
you can use both devices
in party mode in alternation (see chapter “Party
mode” on next page).
Playback
The volume setting
of the external player
affects the volume of the
Motiv Go.
– Start playback on your
external player.
– Pause playback:
Tap the button
– Continue playback:
Tap the button
again.
– Play next track:
Tap the button
®
playback
(8)
.
(8)
(9).
20
• Motiv Go
Page 21
– Start the track from the
beginning:
Tap the button
(7).
– Play previous track:
Tap the button
(7)
twice.
(7)(8)(9)
Party mode
If you are using two external
players at the same time,
you can look for the next
track on one device while
the other is playing.
– Once the track is over,
tap the
then start playback on
the other device.
button (13) and
Voice assistants
Prerequisites: Present Blue-
®
tooth
connection and voice
assistant on the smartphone is enabled.
To activate the assistant,
push the
button
(8)
for
two seconds and wait until
the assistant responds. Then
simply speak in the direction
of the microphone (12) of the
Motiv Go.
(12)
Call function
You can use the Motiv Go as
a hands-free device for your
smartphone.
– In the event of an
incoming call, your smartphone will ring and the
Motiv Go will also emit a
ring tone. Any media playback will be paused.
• Motiv Go
21
Page 22
– To reject the call, hold
button (8) for
the
2 seconds. The call will
be ended and the caller
will hear the busy signal.
– To take the call, tap the
button (8).
– Now you can answer the
call with your Motiv Go
via the integrated microphone (12).
– Push the button (8)
again to end the call.
Media playback will resume.
Terminating the
Bluetooth
®
connection
– To terminate the Blue-
®
tooth
connection, switch
the Bluetooth® function
on your external player/
smartphone off.
– To delete the list of known
external players, hold the
button (13) down for
approx. 10 seconds until
two short signal tones
can be heard.
(8)
(13)
(12)
22
• Motiv Go
Page 23
AUX playback
Connection
The AUX IN jack
to connect an external
player using a stereo
cable with a 3.5 mm jack
plug. You can connect any
external players with a lineout jack or headphone jack.
As soon as you insert
a plug into the AUX
IN socket, the playback is
switched from Bluetooth®
to AUX.
To hear again via Bluetooth®,
remove the jack plug.
12V 2.5A
(17)
serves
AUX IN
(17)
Playback
1. Start playback on your
external AUX player.
The volume setting
of the external player
affects the volume of the
Motiv Go.
2. Control all playback
functions via the external
player.
• Motiv Go
23
Page 24
Care and cleaning
NOTICE
External influences
may damage or
destroy the device.
– If the device is
unattended for a
prolonged period
(e.g. when on vacation) or in the event
of an incoming
storm, disconnect
the device from the
charger. Otherwise,
sudden overvoltage
could cause the
device to become
defective.
– Only use plain water
without any additives. In case of stubborn marks, a mild
soap solution may be
used.
– Do not use caustic
cleaning products, white spirit,
thinners, petrol or
similar under any
circumstances. Such
cleaning agents may
damage the delicate surface of the
housing.
• Ideally, you should
remove dust or small
amounts of dirt with a dry,
smooth leather cloth.
• Use a damp cloth to rub
off stubborn dirt.
• Afterwards, immediately
wipe the damp surfaces
off with a soft cloth
without applying pressure
in order to avoid lime
spots.
24
• Motiv Go
Page 25
Troubleshooting
The following advice should help you to solve problems.
If this does not work, our online manual will provide help:
https://manual.teufelaudio.com
ProblemPossible cause/solution
No function The rechargeable battery is empty:
Recharge the rechargeable battery.
No soundThe volume has been set too low:
Increase the volume.
The volume of the external player has been
set too low:
Carefully increase the volume of the external
player.
No Bluetooth
Establish a connection (see „Bluetooth®“ on
page 19).
Motiv Go has not been selected as the
output device:
On the external player, select
“Teufel MOTIV GO” as the Bluetooth
device.
Bluetooth
radio system (e.g. cordless telephone, Wi-Fi):
Move the devices causing the disturbance.
®
connection:
®
output
®
connection impaired by another
• Motiv Go
25
Page 26
Playback of
my external
player is too
quiet
Playback is
noisy
The voice
assistant
doesn’t
work
Check the settings of your external player.
After applying the latest Android and IOS
updates, a limiter may be activated which
reduces the output signal. This was implemented by the manufactures as a protective
mechanism.
Generally speaking, the Motiv Go is a very
low-noise system. Poor quality of the signal
source or music recording (e.g. MP3 files)
can lead to noisy playback. Therefore,
please also pay attention to the quality of
the titles to be played.
Activate the voice assistant on the smartphone.
26
• Motiv Go
Page 27
Technical data
Operating voltage
of the mains adapter:100-240 V~, 50/60 Hz
Power consumption
of the mains adapter:max. 30 W
Dimensions (W×H×D):205 × 112 × 60 mm
Weight:935 g
The following radio frequency bands and radio transmitting
powers are used in this product:
Frequency bandsMax. transmission power
2.4-2.4835 GHz2.5 mW/4 dBm
You can find further technical data about the product on our
website.
Declaration of conformity
Lautsprecher Teufel GmbH hereby declares that this
product complies with the requirements of the direc-
tives 2014/30/EU, 2014/35/EU and 2014/53/EU
to the extent they are installed and used in accordance with
the instructions of the manufacturer. The full text of the
EU declaration of conformity is available at the following
Internet address: