Teufel CL 250 FCR, CL 250 C Technical Description And Operating Instructions

Page 1
Front-/Rear Speakers CL 250 FCR
... makes you happy
Proper use
Only use the speaker as described in these operating instruc­tions. Any other use will be deemed as not in accordance with the instructions and may lead to damage of property or even persons. The manufacturer accepts no liability for damage caused by use not in accordance with the
instructions. The
speaker is intended for private use.
Before operating the speaker, please read the safety notes and operating instructions carefully. This is the
only way to use all functions safely and reliably. Keep the operating instructions safe and pass them on to anyone who may own the unit after you.
Notice
The information in this document may change without prior notice and in no way constitutes any liability on the part of Lautsprecher Teufel GmbH. No part of these instructions may be reproduced in any form or be broadcasted in any way elec­tronically, mechanically, by photocopy or recording without the written permission of Lautsprecher Teufel GmbH.
Original packaging
If you wish to exercise your eight-week right of return, we ask that you be absolutely sure to hold onto the packaging. We can only accept the return of a device WITH THE ORIGINAL PACKAG­ING. Empty boxes are not available!
Complaints
In case of a complaint we implicitly need your invoice number and the serial or lot number for processing. The serial number can be found on the back side of the device.
Many thanks for your support!
Cont ac t
For questions, suggestions or criticism please contact our customer service department: Lautsprecher Teufel GmbH Gewerbehof Buelowbogen Buelowstrasse 66 10783 Berlin (Germany)
Phone 00800 - 200 300 40 (free of charge) Fax: +49 (0)30 / 300 930 930 E-mail: service@teufelaudio.com www.teufelaudio.com
General notes and information
Product contents 2 speakers CL 250 FCR Dimensions (W x H x D) 15 cm x 50 cm x 7,5 cm Weight 1,9 kg Nominal impedance 4 – 8 Ω
Technical changes reserved! You can nd further technical data on our website.
This product conforms with Council of the European Union guidelines 2004/108/EC and 2006/95/EC
Check that all items have been delivered and that nothing is damaged. In case of damage do not use the product. Instead, contact our service centre.
Product contents and technical data
Technical Description and Operating Instructions
Page 2
Caut ion icons
You will nd the following caution icons in these instructions:
High risk! Failure to observe the warning may result in severe personal injury or death.
=
Danger
Moderate risk! Failure to observe the warning may result in property damage.
=
Attention
Minor risk! Points which should be observed when handling the unit.
=
Attention
Fire hazard!
Improper use may lead to damage or re.
• Do not place open ames such as burning candles or similar on the unit.
• Ensure sufcient ventilation.
• Do not place the unit in direct sunlight.
• Only use the unit in indoor areas.
• Do not use the unit in damp areas and protect it from drops of water and splash water. Also take care not to stand vases or other containers lled with liquid on or near the speaker in order to avoid liquid getting into the case.
Danger
Danger of injury/damage!
Incorrect location may result in damage.
• Never use the speakers unmounted in vehicles, in unsta­ble locations, on wobbly tripods or furniture, on insuf­ciently dimensioned brackets etc. The speakers could tip or fall down and cause injury to persons or be damaged.
• Arrange the speakers so that they cannot be knocked over accidentally and make sure that the cables do not pose a trip hazard.
• Exactly adhere to the assembly instructions.
• If mounting the speakers on the wall, make sure that the installation is carried out expertly.
• Verify the carrying capacity of the walls for wall mounting.
• Do not place the speakers near sources of heat (e.g. heaters, ovens, other heat generating equipment such as ampliers etc.).
Danger
Danger to children!
Children can become trapped in the packing lm when playing and suffocate.
• Do not allow children to play with the unit or the packing lm. Danger of suffocation.
• Ensure that children do not remove small parts from the unit or take them off of the unit (e.g. control knobs or plug adapters). They could swallow the parts and choke. Never allow children to operate electrical devices unsupervised.
Danger to hearing!
Loud noise may lead to hearing loss.
Very high noise pressure may suddenly be emit­ted, especially if a device is activated and set to full volume. This may have psychological consequences and also cause physical injury. Children and pets are particularly at risk.
• Set the volume control of your signal source to a low set-
ting.
• When the volume is set high, always keep a certain dis-
tance from the unit and never place your ear directly on the speaker.
• To avoid damage to health, avoid extended listening at
high volume.
Safety notes
Page 3
Unpacking
• Carefully open the boxes, remove the speakers together with the EPE foam parts and remove the foam parts without touching the diaphragms.
Setup
Note
Our website contains comprehensive notes for correct setup.
• Select a stable, level base.
• Make sure that the environment is clean and free from dust.
• Avoid placing the unit close to sources of heat or in direct sunlight.
• Arrange the connector cables so that they do not pose a trip hazard.
• Do not place any heavy objects on the cables or the speakers.
• Pay attention to a solid state of the speaker to avoid vibra­tions.
Wall mounting
Attention
Risk of damage!
Improper assembly may result in damage.
• If mounting the speakers on the wall, make sure that the installation is carried out expertly.
• Before drilling the holes, make sure that no pipes are located within the drilling area using a metal detector.
• Only use suitable screws and dowels to mount the speak­ers. Verify the carrying capacity of the walls.
• Hang the speaker up on the wall using the keyhole openings on the speaker back side and the screws you previ­ously mounted.
• You can also use these openings for mounting a wall holder. You can nd suitable products for this in our web shop.
Removing the protec tive grids
The protective grids are attached by pins and sockets on the front of the speaker and can be easily removed. When the protective grids are removed, high frequency output becomes clearer in particular. To remove the protective grids, reach behind them and slowly pull them off to the front.
Attention
Risk of damage!
Make sure that you do not touch the highly sensitive
diaphragms.
Connecting
Danger
Danger of injury/damage!
Arrange the cables so that they do not pose a trip hazard.
1. Pull the power plug of your amplier/AV receiver out or multi­channel active subwoofer of the outlet.
2. Lay the speaker cables from your amplier/AV receiver or multi-channel active subwoofer to each speaker. These cables should be high-quality double-wire speaker cable with marked strands.
3. A connector comprising two terminals is located on the back side of each speaker, to which you have to connect the speaker cables. The terminal clips are each marked red (+) and black (-).
Make sure the polarity is correct!
Connect the like coloured terminals. Otherwise the sound quality will suffer.
The speaker connections of your
amplier/
AV receiver or
multi-channel active subwoofer
should be marked similarly. The strands of the speaker cables are marked with different colours or shapes.
4. Split the single wire down to approx. 30 mm on both ends and strip approx. 10 mm of insulation off of each cord.
5. Twist the stripped single wire ends together so that no wire protrudes. Tin coating is not necessary.
6. Turn the connector terminal counterclockwise until loose. Run the stripped cable end into the now visible hole. Close the terminal by turning it clockwise. The cable has now been clamped in place.
7. Connect the cables to the other speaker in the same way.
8. Connect the speaker cables to your amplier/AV receiver
or multi-channel active subwoofer. The operating instructions of the appliance should contain notes on this.
9. Reinsert the power plug of your amplier/AV receiver or multi-channel active subwoofer into the outlet.
Cros sover frequency
The ideal separation frequency for this speakers is 150 Hz. Set this value on the amplier/AV receiver or DecoderStation.
Unpacking, Setup and Connection
Page 4
Clean the speaker regularly with a soft, damp microbre cloth. Please be absolutely sure to observe the following notes in the process:
• If possible, only use plain water without any additives. In case of stubborn marks, a mild soap solution may be used.
• Make sure that no liquid penetrates the unit.
Cleaning and care
Attention
Risk of damage!
Using the wrong cleaning materials may damage
the delicate surface of the case. If possible, only use plain water without any additives. In case of stubborn marks, a mild soap solution may be used. In no circumstances should caustic cleaning products, white spirit, thinners, petrol or similar be used for cleaning.
The following notes and further detailed information on our website should help you to rectify malfunctions. If this does not lead to success, please contact our hotline
00800 - 200 300 40 (free of charge). Please also observe the warranty notes.
Problem Possible cause Solution Playback is noisy. In general, the speaker is very low-noise. In
most cases, the speaker system with excep­tional resolution in the high range area can expose the poor quality of a signal source (e.g. from MP3 les).
Ensure that the source is sending a clear signal.
The sound seems dull. The speakers have been connected with the
wrong poles.
Verify the correct connection of the cables for all speak­ers.
Disposal of the unit
Used units must not be disposed of with household waste.
If the unit is no longer operational, every consumer is required by law to dispose of used devices separately from household waste, e.g. at a collec-
Troubleshooting
Protecting the environment
tion point run by the communal authority borough. In this way it is ensured, that used devices are properly recycled and that negative consequences on the environment are avoided. For this reason, electrical equipment is labelled with the displayed symbol.
Lautsprecher Teufel GmbH
Gewerbehof Buelowbogen - Aufgang D1 Buelowstr. 66, 10783 Berlin (Germany)
Phone: 00800 - 200 300 40 (free of charge) Fax: +49 (0)30 / 300 930 930
... makes you happy
No responsibility is as sumed for the correctness of this information. Technical changes, typographical errors and other errors reserved. Instruction No. 92225 R GB 20120816 / HC-HAM
Loading...