Teufel Cinebar Duett Technical Description And User Manual

Cinebar Duett

2.1 Soundbar with wireless technology

Technical Description
and User Manual

2 • Cinebar Duett

Contents

General Notes And Information ....3

Notice ............................................ 3

Trademarks ................................... 3

Original packaging ........................ 3

Complaints .................................... 4

Contact .......................................... 4

For Your Safety ..............................5

Proper use ..................................... 5

Explanation of terms ..................... 5

Safety notes .................................. 5

Explanation of symbols ................. 8

Overview ........................................9

Unpacking...................................... 9

Package contents ......................... 9

Checking the product contents .... 9

Controls and Connections ...........10

Remote Control ...........................11

Inserting/changing the

batteries ......................................12

Setup/Wall Mounting ..................13

Setup location ............................. 13

Location tips ................................13

Wall mounting .............................13

Connecting ...................................14

TV set ........................................... 14

HDMI source ................................15

Analogue source .........................15

Optical-digital source ..................15

Power supply ............................... 15

Operation .....................................16

Activating and deactivating ........16

Selecting a source ......................16

Adjusting the volume ..................17

Mute ............................................17

Adjusting the volume of the

subwoofer ....................................17

Adjusting the sound ....................18

Equalizer ...................................... 18

Stereo widening ..........................18

Dolby Digital and DTS .................18

Menu............................................19

Bluetooth

®

Mode .........................21

Bluetooth® options ......................21

Pairing and connecting ...............21

Software Update ..........................23

Installing new software ...............23

Care And Cleaning .......................24

Troubleshooting ...........................25

Technical Data .............................27

Declaration Of Conformity ..........27

3 • Cinebar Duett

General Notes And Information

Notice

The information in this document
may change without prior notice and
in no way constitutes any liability
on the part of Lautsprecher Teufel
GmbH.

No part of this user manual may
be reproduced in any form or be
broadcasted in any way electroni­cally, mechanically, by photocopy or
recording without the written permis­sion of Lautsprecher Teufel GmbH.

© Lautsprecher Teufel GmbH

Version 1.0, September 2017

Trademarks

® All trademarks and brand names
are the property of their respective
owners.

Manufactured under
license from Dolby Labo­ratories. Dolby, Dolby
Audio, Pro Logic, and the

double-D symbol are trademarks of

Dolby Laboratories.

For DTS patents, see
http://patents.dts.

com. Manufactured
under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and
the Symbol together are registered
trademarks, and DTS Digital
Surround is a trademark of DTS, Inc.
©DTS, Inc. All Rights Reserved.

The Bluetooth® word

mark and logos are
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of
such marks by Lautsprecher Teufel is
under license.

The terms HDMI

and HDMI
High- Definition Multimedia Interface,
and the HDMI Logo are trademarks
or registered trademarks of HDMI
Licensing Administrator, Inc. in the
United States and other countries.

Original packaging

If you wish to exercise your eight­week right of return, we ask that
you be absolutely sure to hold onto
the packaging. We can only accept
product returns with the ORIGINAL
PACKAGING.

Empty boxes are not available!

4 • Cinebar Duett

Complaints

In case of a complaint we will need
the following information to process
your enquiry:

1. Invoice number

Can be found on the sales slip
(enclosed with the product) or on the
order confirmation received as a PDF
document, e.g. 4322543.

2. Serial number or batch number

Located on the back side of
the device, e.g. serial no.:
KB20240129A-123.

Thank you for your support!

Contact

Please contact our customer service
department with any questions,
suggestions, or complaints:

Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Str. 44
10787 Berlin (Germany)

Phone 00800 - 200 300 40 (toll-free)

Fax: +49 (0)30 / 300 930 930

Service:
www.teufelaudio.com/service

Contact:
www.teufelaudio.com/contact

Before operating the product
for the first time, please read

the safety notes and user
manual carefully. Only in this way,
can you ensure that all functions are
used in a safe and reliable manner.
Store the user manual in a safe place
and also be sure to pass it on to any
subsequent owner.

NOTICE

Check that all items have
been delivered and that
nothing is damaged. If you
find any damage, do not
operate the device; instead
contact our customer service
department.

5 • Cinebar Duett

For Your Safety

Proper use

The speaker is designed for the play­back of music and speech from an
external player.

Only use the speaker as described
in this user manual. Any other use
will be deemed as not in accordance
with the instructions and may lead to
damage of property or even persons.

The manufacturer accepts no liability
for damage caused by improper use.

The speaker is intended for private
use.

Explanation of terms

You can find the following signal
terms in this user manual:

CAUTION

This signal term indicates a
low risk, which, if not avoided,
may result in minor or
moderate injury.

NOTICE

This signal term warns you of
potential damage.

Safety notes

This chapter contains general safety
notes which you should always
observe to protect yourself and third
parties. Also observe the warning
notes in each chapter of this user
manual.

Touching live parts can result in
severe injury or death.

• When connecting the mains
adapter, make sure that the correct
voltage is present. You can find
more information about this on the
rating plate.

• Check the device regularly for
damage.

Immediately disconnect the mains
plug and do not operate the device
if its housing, mains adapter or
mains cord is defective or exhibits
other visible damages.

• This device is disconnected from
the grid by pulling the mains plug.
Thus, make sure that the mains
plug is always easily accessible.

• If the device emits smoke, smells
burnt or produces unusual sounds,
immediately disconnect it from the
mains and do not operate it further.

• Never open the device housing.
Repairs may only be carried out by
an authorised specialist workshop.
Only parts that match the original
specifications may be used.

6 • Cinebar Duett

• Only use the accessory products
specified by the manufacturer.

• Only use the device indoors.

• Do not operate the device in wet
rooms and protect it from dripping
and splashing water. Make sure
that no vases or other liquid-filled
objects are located on or near the
device in order to prevent liquid
from penetrating the housing.
If water or other debris ends up
penetrating the housing, imme­diately pull the mains plug and, if
applicable, take out any batteries.
Then send the device to our service
address.

• Never modify the device. Unauthor­ised modifications may affect the
safety and functionality.

• Never touch the mains plug with
wet hands.

An unsuitable setup location may
result in injury and damage.

• Never use the device unmounted
in vehicles, in unstable locations,
on wobbly tripods or furniture, on
insufficiently dimensioned brackets
etc. The speaker could tip or fall
down and cause injury to persons
or be damaged itself.

• Arrange the device so that it cannot
be knocked over accidentally and
make sure that the cables do not
pose a trip hazard.

• Do not place the device and the
mains adapter near heat sources
(e.g. heaters, ovens, other heat
generating equipment such as
amplifiers etc.).

• Do not use the device in environ­ments where there is a risk of
explosion.

• Only use the wireless function
(Bluetooth

®

, wireless subwoofer)
in locations where wireless radio
transmission is allowed.

Children can become trapped in
the plastic wrapping when playing
and suffocate.

• Do not allow children to play with
the device or the plastic wrapping.
There is a danger of suffocation.

• Never allow children to operate
electrical equipment unsupervised.

Swallowing a product battery may
result in severe internal injury or
even death.

• Store both new and used batteries
so that they are not accessible to
children.

• If it is no longer possible to safely
close the battery compartment,
stop using the remote control and
store it so that it is not accessible
for children.

• If you suspect that a battery has
been swallowed or otherwise
incorporated, promptly consult a
physician.

Leaking battery acid may lead to
chemical burns.

• Do not allow battery acid to come
into contact with skin, eyes or
mucous membranes. In the event
of contact with acid, immediately
flush the applicable areas with
plenty of clean water and consult a
physician if necessary.

7 • Cinebar Duett

Batteries (particularly lithium
batteries) can explode if used
improperly.

• Never attempt to recharge
batteries.

• Only use batteries of the same or
equivalent type.

• You must not heat or short circuit
batteries and rechargeable
batteries or dispose of them in fire.

• Do not expose batteries and
rechargeable batteries to direct
sunlight.

Extended listening at high volumes
may lead to hearing loss.

To avoid damage to health, avoid
extended listening at high volumes.

• When the volume is set high,
always keep a certain distance
from the device and never place
your ear directly on the speaker.

• If your amplifier is set to full
volume, it may produce very high
sound pressure. This may have
psychological consequences and
also cause physical injury. Children
and pets are particularly at risk. Set
your signal source device volume
to a low setting before turning on
the power.

This product contains magnetic
material.

• If necessary, consult your physician
and ask for effects on implants
such as pacemakers or defibrilla­tors.

Improper use may lead to damage
or fire.

• Do not place open flames such as
burning candles or similar on the
device.

• Ensure sufficient ventilation.

• Do not place the device in direct
sunlight.

• Only use the device indoors.

• Do not operate the device in wet
rooms and protect it from dripping
and splashing water. Make sure
that no vases or other liquid-filled
objects are located on or near the
device in order to prevent liquid
from penetrating the housing.

The isolation pads can produce
discolouration on sensitive
surfaces.

• On parquet, varnished wood and
similar surfaces, you should stick
felt gliders to the rubber feet of the
device or put a blanket under it.
This will prevent discolouration of
the floor over the long term.

8 • Cinebar Duett

Explanation of symbols

Protection class II

Dual insulation

May only be used indoors

Risk of electrical shock –
do not open the housing.
Disconnect the mains cord
before changing a fuse.

Polarity of the round
connector: outside (–),
inside (+)

Old devices must not be
disposed of with house­hold waste!

Electrical equipment
contains harmful substances and
valuable resources.

Every consumer is required by law
to bring all old electrical devices to
an authorised collection or return
point so that they can be disposed
of in a manner that is environmen­tally friendly and which preserves
resources.

You can hand old electrical devices
over to the local reusable materials/
recycling centre.

Please contact your vendor directly
for more information about this topic.

Batteries and recharge­able batteries do not
belong in the household

garbage!

Every consumer is required by law
to bring all batteries and recharge­able batteries, regardless whether
they contain harmful substances*)
or not, to a collection point run by
the communal authority or borough
or to a retailer, so that they can be
disposed of in an environmentally
friendly manner.

Please only turn in batteries and
rechargeable batteries which are
empty!

*) labelled with: Cd = cadmium,

Hg = mercury, Pb = lead

9 • Cinebar Duett

(1)

(2)

(3)

(4)

(5)

Overview

Unpacking

• Carefully open the box, take out the
EPE foam half-shell and carefully
lift the device out of the box.

Package contents

(1) 1× Cinebar Duett

(2) 1× remote control CB 12 RC

(3) 1× mains adapter for the

Soundbar

(4) 1× mains cord for the mains

adapter

(5) 2× AAA batteries for the remote

control

Checking the product
contents

• Check that all items have been
delivered and that nothing is
damaged.

• If the delivery is incomplete or the
device has been damaged, please
contact our service team (see
page 4).

• Do not in any case operate the
device if it is damaged.

10 • Cinebar Duett

(14)(13) (15) (16) (17)

MENU

(7) (8) (9) (10) (11) (12) (6)(6)

Controls and Connections

(6) Keyhole opening for wall

mounting

(7) POWER – connector jack for

the mains adapter (3)

(8) AUX IN – input jack for

analogue audio source device

(9) OPT IN – input jack for digital

audio source device

(10) USB port for software updates
(11) HDMI connection for the TV set
(12) HDMI IN – connection for an

external HDMI device

(13) Text field for the menu and

information

(14) – Switch the device on and to

standby mode

(15) – Decrease the volume or the

menu setting

(16) – Increase the volume or the

menu setting

(17) – Select a source

11 • Cinebar Duett

(32)

(31)

(19)

(30)

(29)
(28)

(23)

(22)

(21)

(20)

(24)
(25)

(26)

(27)

(33)

(18)(34)

Remote Control

(18) Mute speaker (mute)
(19) Access the menu
(20) Increase the volume or the

menu setting

(21) Decrease the volume or the

menu setting

(22) Select Bluetooth

®

as source

(23) Select analogue source AUX
(24) Select digital source OPTICAL
(25) Adjust the tone (bass and

treble)

(26) Adjust stereo widening
(27) Adjust the sound pattern:

MUSIC
VOICE
MOVIE
NIGHT

(28) Adjust the volume of the

subwoofer

(29) Select HDMI IN as source
(30) Select TV as source via HMDI

ARC

(31) Select the sub-menu or

control the Bluetooth® device:
Skip forward/back

(32) Confirm the menu or

control the Bluetooth® device:
Start/pause playback

(33) Display information about

spatial sound, sound pattern
and software

(34) Switch the device and to

standby

12 • Cinebar Duett

CAUTION

Leaking battery acid may lead
to chemical burns.

– Do not allow battery acid to

come into contact with skin,
eyes or mucous membranes.
In the event of contact with
acid, immediately flush the
applicable areas with plenty
of clean water and consult a
physician if necessary.

Batteries (particularly lithium
batteries) can explode if used
improperly.

– Never attempt to recharge

batteries.

– Only use batteries of the

same or equivalent type.

– You must not heat or

short circuit batteries and
rechargeable batteries or
dispose of them in fire.

– Do not expose batteries and

rechargeable batteries to
direct sunlight.

Inserting/changing the
batteries

In order to operate the remote
control, you will need two type LR03
batteries (AAA – included in the
package contents).

You should change the batteries if the
remote control stops working properly
or after 2 years at the latest:

1. Gently depress the arrow on the
battery compartment cover on the
back side of the remote control.
Push the cover down. Remove the
cover.

2. If applicable, remove the old
batteries and dispose of them.

3. Insert the new batteries according
to the image in the battery
compartment; make sure the
polarity is correct.

4. Place the cover back on the
compartment and push it closed.

13 • Cinebar Duett

Setup/Wall Mounting

NOTICE

If the device is subjected
to warm temperatures after
being cold (e.g. after trans­port), condensation may occur
inside of it.

– In this case, wait approx. 2

hours before you connect and
activate it.

Setup location

The space in front of or under the TV
set is an ideal location.

Location tips

• Select a stable, level base.
In case of wall mounting, follow the
instructions in the next chapter.

• Make sure that the environment is
clean and free from dust.

• Select a location away from heat
sources and direct sunlight.

• Do not place any heavy objects on
the cables or the device.

Wall mounting

Proceed with care when mounting the
Cinebar Duett on the wall and follow
the instructions below.

You will need the following material
to mount the product on a solid stone
wall (not included in the package
contents):

• 2 dowels (ø 5 mm)

• 2 screws, 4 x 45 mm, screw head =
ø approx. 8 mm

CAUTION

Risk of injury/damage!

– Only qualified persons may

mount the Cinebar Duett on
the wall.

– The device may only be

mounted on a suitable,
solid wall. Special dowels or
anchors may be necessary
when mounting the product
on lightweight walls. Consult
a qualified professional in
this case.

– Make sure that there are no

cables or pipes in the drilling
areas. Before you drill, use a
metal detector to check the
applicable areas. Otherwise,
there is a risk of electric
shock/short circuit!

14 • Cinebar Duett

Connecting

CAUTION

Risk of injury/damage!

– Lay the cables so that

they do not pose a tripping
hazard.

Three red rubber loops are located
on the back of the Cinebar Duett. Pull
the connector cord through these
loops so that they don’t hang around
loose.

1. Space the two keyhole openings
(6) in the wall where you would like
to mount the Cinebar Duett at a
distance of 64.3 cm apart. Use a
ruler, pencil and spirit level for this.

2. Use a metal detector to check the
drill areas. If necessary, select
another area for mounting.

3. Use a 5 mm rock drill to drill holes,
which are approx. 40 mm deep, at
the marked positions.

4. Insert 2 dowels (ø 5 mm) all the
way in the drill holes.

5. Screw one screw (4x45 mm) into
each dowel until there is approx.
15 mm of space between the wall
and the screw head.

(6)

6. Press the Cinebar Duett up against
the wall so that the screws vanish
in the keyhole openings (6).

7. Now pull the Cinebar Duett down
so that the screws slip into the
small slot.

8. If applicable, screw the screws
further in or out until the
Cinebar Duett is securely mounted
on the wall.

TV set

If your TV is equipped with an ARC
capable HDMI jack, connect it via the
HDMI TV jack (11). You will need an
ARC capable HDMI cable for this.

The ARC (audio return channel) HDMI
function plays the television audio via
HDMI. With some TV sets, this func­tion must be activated in the menu
and in most cases, only one HDMI
connection is ARC capable (see the
user manual for the TV set).

15 • Cinebar Duett

Optical-digital source

You can connect the optical digital
sound output of a source device to
the OPTICAL jack (9). You will need
an optical cable with a TOSLINK plug
for this. Your source device requires
either an optical 3.5 mm plug or also
a TOSLINK plug.

(7)

(9)

Power supply

1. Insert the small plug of the
enclosed mains adapter (3) in the
POWER jack (7).

(3)

(4)

2. Use the enclosed mains cord (4)
to connect the mains adapter to a
mains socket.

If your TV set does not support the
ARC HDMI function, you can also
connect it to the analogue (AUX IN,
(8)) or optical-digital (OPT IN, (9))
input.

(11) (12)

HDMI source

You can connect a source device with
digital sound and picture to the HDMI
IN jack (12) (e.g. a sat receiver or a
Blu ray player).

You do not also have to connect this
source device to your TV set. The
video signal from these devices is
looped through and forwarded to the
television set via HDMI TV (11).

Analogue source

You can connect a source device with
analogue sound (e.g. a CD player or
TV set) to the AUX IN jack (8). You will
need a stereo cable with a 3.5-mm
jack plug to do so.

(8)

16 • Cinebar Duett

Operation

Activating and
deactivating

• Turn the Cinebar Duett on or
to standby with the button
(14)/(34).

• After activation, the lettering
“TEUFEL” will appear in the text
field (13); the last active audio
source and volume will be set in
the process.

• If the TV set connected via HDMI
is compatible with HDMI-CEC, the
Cinebar Duett will be activated via
the TV set and – providing TV or
HDMI IN are selected as the source
– also switched off (standby).

• If the Cinebar Duett does not
receive an audio signal for more
than 20 minutes, it will automat­ically switch to standby (also see
the menu “ASTBY”, page 19).

Selecting a source

• On the remote control, select the
source with the following buttons:

AUX (23) Select analogue

source AUX

OPT (24) Select digital source

OPTICAL

(22)

Select digital source
Bluetooth

®

HDMI (29) Select digital source

HDMI

TV (30) Select TV as source

via HMDI ARC

• On the Cinebar Duett, select the
source by pushing the button

(17) repeatedly.

The selected source will appear in the
text field (13).

MENU

(14)(13) (17)

(30)

(29)

(23)

(22)

(24)

(34)

17 • Cinebar Duett

(13) (15) (16)

MENU

(28)

(21)

(20)

(25)
(26)

(27)

(18)

Adjusting the volume

• Push the buttons (15)/(21)
to decrease and (16)/(20) to
increase the volume.
The current value will appear in
the text field(13) while making the
setting.

• In HDMI mode, the volume can
also be adjusted with the remote
control of the TV set (if HDMI CEC is
supported by the TV set).

The volume setting of an
external player often affects the

volume of the Cinebar Duett.

Mute

• By pushing the button (18)
repeatedly, you can switch the
sound off and back on.

• You can also configure the volume
to switch the device on.

Adjusting the volume of
the subwoofer

If you have connected a compatible
wireless subwoofer, adjust its rela­tive volume with the SUB +/- (28)
buttons.

18 • Cinebar Duett

Adjusting the sound

You can adjust the sound in two
ranges:

• BASS

• TREBLE

1. Press the TONE button (25).
The message “BASS” and the set
value for the low tones from -10 db
to +10 will appear in the text field
(13).

2. With the buttons

(15)/(21) and

(16)/(20), you can set the bass

level to your liking.

3. Press the TONE button(25) again.
The message “TREBLE” and the
set value for the high tones from

-10 db to +10 will appear in the
text field (13).

4. With the buttons (15)/(21) and

(16)/(20), you can set the treble

level to your liking.

5. The device will return to normal
operation after three seconds of
button inactivity.

Equalizer

Use the buttons (27) to select the
four predefined sound patterns:

Movie

Movie sound: Dynamics and bass will
be increased.

Voice

Clear sound for messages and maga­zines: Bass tones reduced, midtones
raised.

Music

Balanced sound across all frequency
bands.

Night

Certain frequencies are weakened to
avoid disrupting the sleep of unin­volved persons as much as possible.

Stereo widening

DYNAMORE® is a technique that
makes the distance between the
front speakers sound wider. This
generates an impressive, spatial and
wide-ranging sound.

With the buttons(26), you can select
the normal (WIDE) or strong (ULTRA)
effect. OFF switches stereo widening
off.

Dolby Digital and DTS

When playing back Dolby Digital or
DTS encoded multi-channel tracks,
the message “Dolby Audio - Dolby
Digital” or “DTS” will light up on the
text field for three seconds.

19 • Cinebar Duett

Menu

Some functions of your Cinebar Duett
are configured via the menu. You can
navigate through the menu with the
remote control and it will be shown in
the text field (13).

To use the menu:

1. Push the MENU button (19).

2. Select the desired menu item with
the navigation buttons

(31).

3. Set the desired value with
the buttons (15)/(21) and

(16)/(20).

MENU

(13)

(32)

(31)

(19)

(21)

(20)

The following items are available:

D. (display)

You can set the brightness of the text
field (13) here:

BRIGHT
DARK
OFF

When operating the device, the text
field lights up completely and, after a
few seconds, dims back to the value
set here.

DPL (Dolby Prologic II)

Switch the Dolby Prologic decoding
ON or OFF while playing back stereo
signals.

The setting has no effect with DD and
DTS signals.

A STBY (auto standby)

Here you can turn the automatic
switching to standby mode ON and
OFF.

BT STB (Bluetooth

®

standby)

If the Cinebar Duett is in standby,
you can switch it on with the last
Bluetooth® device paired by simply
starting playback. This option allows
you to switch Bluetooth® standby on
and off.

20 • Cinebar Duett

CEC

This option allows you to switch the
HDMI function CEC on and off.

With CEC, you can control the Cinebar
Duett with the remote control of
the TV set via the HDMI connection
(activation and deactivation, adjust­ment of the volume, automatic switch
between sources). For this, the TV set
must support CEC.

SUB PAIR

You can operate the Cinebar Duett
with a compatible wireless
subwoofer. For this, pair the devices:

1. Select this menu item and push
the OK button (32).
The notice “PAIRING” appears
in the text field (13) – now, the
Cinebar Duett will scan for a
wireless subwoofer for approx. 60
seconds.

2. On your wireless subwoofer, start
the process to establish a connec­tion with its “Pairing” button (see
the corresponding user manual).

– The connection will have been

established after a short time and
the message “CONNECTED” will
briefly appear in the text field.

– If “TIME OUT” appears instead, no

connection has been established.
Repeat the process.

RESET

This clears all modified settings:

• Push the button

(16)/(20).
The text field will switch from
“RESET NO” to “RESET YES”.

• Push the MENU button(19) to
cancel.

• Push the OK/INFO button(33) to
clear.

The Cinebar Duett will switch to
standby mode. Once you have
switched the device on again, the
default settings will be restored.

SW (software version)

Based on the version shown here
(e.g. “v28”), you can determine
whether new system software is
available on our website
www.teufelaudio.com/software-up­dates.html

(see „Software Update“ on

page 23).

21 • Cinebar Duett

Bluetooth® Mode

Via Bluetooth®, you can wirelessly
connect a compatible external player
with the Cinebar Duett. The audio
output of your external player is then
emitted by the Cinebar Duett.

The Bluetooth

®

wireless transmission
system has a range of approximately
10 metres that is limited by walls and
furnishings. If the connection is cut
off, the Cinebar Duett will attempt to
re-establish a connection until you
select another source.

NOTICE

– Only use the Bluetooth®

function in locations where
wireless radio transmission
is allowed.

– Please keep in mind that

the Bluetooth

®

behaviour
may differ depending on the
external player’s operating
system.

Bluetooth® options

Depending on the device type, your
external player/smartphone may also
have a menu for Bluetooth® options
such as media playback. Here you
can activate and deactivate the
desired options. You can find more
information about the Bluetooth®
options in the user manual for your
external player/smartphone.

Pairing and connecting

To play the audio of your external
player on your Cinebar Duett via Blue­tooth®, connect the devices with each
other. The technical term for this is
“ pairing”.

1. Turn on the Bluetooth® function on
your external player (e.g. smart­phone).

2. Use the

button (22)

to select
the “Bluetooth” input on the
Cinebar Duett.

3. Push the

button (22) again and
hold it down for approx. 3 seconds
to start the pairing process. The
message “PAIRING” will appear in
the text field.

4. Let your external player/your
smartphone scan for Bluetooth®
devices. You can find more infor­mation about this in the user
manual for your external player.
“Teufel Cinebar Duett” should also
appear in the list of detected devices
after the scan.

5. Select “

Teufel Cinebar Duett

” from

the list of detected devices.

6. If your external player asks for a
code, enter “0000” (four zeros).

Pairing is now complete. “BLUE­TOOTH” appears in the text field and
your Cinebar Duett will now act as
a Bluetooth® playback device. The
Cinebar Duett will now play back
all sounds that would otherwise be

22 • Cinebar Duett

played by your external player/smart­phone.

Playback

The volume setting of the
external player affects the

volume of the Cinebar Duett.

1. Use the button (22) to select
Bluetooth® as the source.

2. Turn on the Bluetooth® function on
your source device.

3. Start playback on your source
device.

You can control playback on your
source device. You can also control
some functions with the remote
control of the Cinebar Duett:

• Pause playback: Push the button

(32).

• Continue playback: Push the
button (32) again.

• Play next track: Tap the button

(31).

• Restart the current track: Tap the
button (31).

• Play previous track: Tap the button

(31) twice.

– If your source device is a smart-

phone, the Bluetooth® connection
will be interrupted in the event of
an incoming call and you can make
phone calls as usual. After finishing
your phone call, the sounds will
once again be diverted and played
back by your Cinebar Duett

.

Interruption of connection

If your external player moves out of
the range of your Cinebar Duett, the
Bluetooth

®

connection will be inter­rupted. If you are back within range
within 120 seconds, the connection
will be re-established automatically.

Terminating the connection

To terminate the Bluetooth

®

connec-

tion,

– deactivate the Bluetooth® function

on your external player/smart­phone.

– select another source on the

Cinebar Duett.

(13)

BLUETOOTH

(32)

(31)

(22)

23 • Cinebar Duett

The software of the Cinebar Duett is
being continually developed. You can
download subsequent versions from
our website

www.teufelaudio.com/support/.

Installing new software

Load the new software from our
website.

1. Unpack the downloaded file and
save it to a USB stick (FAT32
format).

2. Disconnect the mains plug of the
mains adapter Cinebar Duett from
the socket.

NOTICE

Risk of damage!

– The Cinebar Duett must

not be turned off while the
following steps are being
performed!

3. Insert the USB stick in the SERVICE
jack (10).

4. Connect the mains adapter with
the socket again. “START UPG” will
appear in the text field (13) and the
update will run in multiple phases.
Finally, the message “UPG OK” will
appear and the Cinebar Duett will
switch to standby mode.

Software Update

5. Disconnect the mains plug of the
mains adapter Cinebar Duett from
the socket again.

6. Pull the USB stick out of the
SERVICE jack (10).

7. Connect the mains adapter with
the socket again.

The new software is now installed.

(13)

START UPG

(10)

24 • Cinebar Duett

Care And Cleaning

NOTICE

External influences may
damage or destroy the
device.

– If the device is to be left unat-

tended for a prolonged period
of time (e.g. during a vaca­tion) or if a thunderstorm is
forecast, pull the mains plug
out of the socket. Otherwise,
sudden overvoltage could
cause the device to become
defective.

– In the event of prolonged

absence, remove the
batteries from the remote
control. Leaked batteries may
damage the remote control.

– If possible, only use plain

water without any additives.
In case of stubborn marks,
a mild soap solution may be
used.

– Do not use caustic cleaning

products, white spirit, thin­ners, petrol or similar under
any circumstances. Such
cleaning agents may damage
the delicate surface of the
housing.

• Ideally, you should remove dust or
small amounts of dirt with a dry,
smooth leather cloth.

• Use a damp cloth to rub off stub­born dirt. Make sure that no liquid
penetrates the housing.

• Then immediately wipe the damp
surfaces off with a soft cloth
without applying pressure.

25 • Cinebar Duett

Troubleshooting

The following advice should help you to solve problems. If this does not help,
you will find useful information in the detailed FAQs on our website. Otherwise,
please contact our hotline (see page 3). Take note of the warranty instructions.

Problem Possible cause Solution
No func-

tion.

No power supply. Check the function of the socket with

another device.

The small plug of the
mains adapter has
slipped out.

Check the connection of the mains
adapter (page 15).

The device
doesn’t
emit any
sound.

The wrong source has
been selected.

Select the right source (page 16).

The device is set to
“mute”.

Push the button (18) or adjust the
volume.

The volume is set to
“0”.

Increase the volume.

The volume of the
external player has
been set too low.

Carefully increase the volume of the
external player.

No sound
during TV
playback.

The ARC function on
the TV is not activated.

Switch ARC on in the menu of the TV.

HDMI jack on the TV
does not support the
ARC function.

Use the jack supporting the ARC function
on the TV.

HDMI cable without
ARC function.

Use a suitable HDMI cable.

No sound
with Blue­tooth®.

No Bluetooth® connec­tion.

Establish a connection (see page 21).

Cinebar Duett has not
been selected as the
output device.

On the external player, select
“Teufel Cinebar Duett” as the Bluetooth®
output device.

Bluetooth® connection
impaired by another
radio system (e.g. cord­less telephone, Wi-Fi).

Set up the Cinebar Duett and/or external
player in another location. Move to
another room to test.

26 • Cinebar Duett

The
wireless
subwoofer
doesn’t
work.

The subwoofer is off
or doesn’t have any
power.

Switch the subwoofer on. Check the
mains cord and socket.

No wireless connec­tion.

Establish a connection (see „SUB PAIR“
on page 20).

The
subwoofer
hums.

The hum is due to line
disturbance.

Buy a mains filter and connect both
devices to it.

The humming is
caused by a multiple
socket strip.

Use a different multiple socket strip or
connect the subwoofer directly to the
wall socket. It may also help to insert the
mains plug in the socket the other way
around.

Playback is
noisy.

Generally speaking,
the Cinebar Duett is a
very low-noise system.
The speaker system
with very high resolu­tion in the high range
area can expose the
poor quality of a signal
source (e.g. from MP3
files).

Ensure that the source is sending a clear
signal to the Cinebar Duett.

27 • Cinebar Duett

Dimensions (WxHxD) 960 × 68 × 125 mm

Weight 2,200 g

Operating voltage of the
mains adapter

100–240 V~, 50/60 Hz, 1.5 A max.

Technical Data

You can find further technical data on our website. Technical changes reserved!

Declaration Of Conformity

Lautsprecher Teufel GmbH hereby declares that this product complies
with the requirements of the directives 2014/30/EU, 2014/35/EU

and 2014/53/EU to the extent they are installed and used in accord­ance with the instructions of the manufacturer. The full text of the EU declaration
of conformity is available at the following Internet address:

www.teufelaudio.com/konformitaetserklaerungen.html

The following radio frequency bands and radio transmitting powers are used in
this product:

Radio network Frequency bands in MHz Transmission power in mW/dBm
Bluetooth

®

2400–2483.5 2.5/4

Wireless
subwoofer

2405–2477 1/0

Manual No. 195744_GB_20170913

Please contact our customer service department with any questions, sugges­tions, or complaints:

Lautsprecher Teufel GmbH
BIKINI Berlin
Budapester Str. 44
10787 Berlin (Germany)

Phone.: [phone] (toll-free)

Fax: +49 (0)30 - 300 930 930

Service: www.teufelaudio.com/service

Contact: www.teufelaudio.com/contact

No responsibility is assumed for the correctness of this information.
Technical changes, typographical errors and other errors reserved.