testo 881 User guide
Getting to know the quick select buttons
Using the quick select buttons, the set functions are called up directly. Factory settings:
|
|
|
|
|
|
|
Left quick select button |
: Adjust scaling. |
|
|
|
|
|
|
|
Right quick select button |
: |
|
Scale… |
|
Image type |
|||||
|
|
|
|
|
|
|
testo 881-2: Switch on laser. |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
testo 881-1/3: Select image type. |
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Warning! Eye damage due to laser beam. |
|
|
|
|
|
|
|
Do not look into the laser beam and do not point |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
the laser beam at people. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Changing assignment of the quick |
||
|
|
|
|
|
select buttons |
||
|
Image type |
||||||
|
Laser |
|
|
|
|
||
|
Light |
|
Change the left or right quick select button: |
||||
|
Palette |
|
|||||
|
Emissivity... |
1 |
Call up: Move Joystick to the left or right. |
||||
|
Scale... |
||||||
|
|
2 Navigate: Move Joystick up / down. |
|||||
|
Adjustment |
|
|||||
|
|
|
|
3 |
Confirm: Press [OK] . |
||
|
|
|
|
||||
|
|
|
|
|
|
or |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
Cancel: Press [Esc] . |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
Contact
GREAT BRITAIN / IRELAND |
AUSTRALIA |
Testo Ltd. |
Testo Pty Ltd |
Alton, Hampshire GU34 2QJ |
Croydon South VIC 3136 |
Tel. (14 20) 54 44 33, Fax (14 20) 54 44 |
Tel. (3) 98 00 46 77, Fax (3) 98 00 46 99 |
E-mail: info@testo.co.uk |
E-mail: info@testo.com.au |
USA |
The most up-to-date address details of our subsidiaries and |
Testo Inc. |
agencies can be found in Internet at: www.testo.com |
Flanders, NJ. 07836 |
|
Tel. (973) 2 52 17 20, Fax (973) 2 52 17 29 |
|
E-mail: info@testo.com |
0970 8806 en 01 V01.00 en-GB |
|
testo 881 · Thermal imager
Brief instructions |
en |
|
|
Building inspection
Electrical maintenance work
Mechanical maintenance
Apply
Commissioning
1 |
Push the rechargeable battery all the way |
|
into the rechargeable battery slot until this is flush |
|
with the bottom of the handle. |
- |
The thermal imager starts automatically. |
2 |
Remove protective film from the display . |
-Instrument language (Language) and temperature unit (Unit) can be set:
3Move Joystick up / down to select the desired option.
4 Press [OK] .
5Move Joystick up / down to change the setting.
6Press [OK].
7Press [Apply] function key to apply the settings.
8 |
Press [ ] to switch off the thermal imager. |
9 |
Connect mains unit ( ) . |
10 |
Completely charge battery (3 hours). |
11 |
Insert Memory card in the card slot (SD) . |
- |
The camera is now ready for operation. |
Switching on / off
Remove protection cap from the lens. Switch on: Press [
] .
-The measurement view is opened after the warmup period.
-The thermal imager performs an automatic zeroing approx. every 60 sec. This can be recognized by a “click”. The image is frozen briefly when this occurs.
Switch off: Press [
] again.
Measurement
Image gallery
Scale...
Display...
Emissivity...
Palette
Audio…
Configuration
Focusing the picture
With motor focus (testo 881-3 only)
1Switch on motor focus: Slide motor focus switch towards the display (position 
).
2 Focus: Move motor focus control .
Manual
testo 881-3 only: Caution! Manually turning while motor focus is switched on damages the auto mechanism.
Switch off motor focus: Slide motor focus switch towards the lens (position: 
).
Turn lens by hand.
Recording the image
1 Freeze image: Press trigger button once.
2Save image: Press trigger button again. or
Discard image: Press [Esc] .
Getting to know the menu
1 |
Open menu: Press [OK] . |
2 |
Navigate: Move Joystick up / down. |
3Open submenu (only for menu points marked with 
): Move joystick to the right.
4Call up a function: Press [OK]. or
Exit menu: Press [Esc] .
Loading...