Testo 835-T2 Quick Start Guide
Element Function
1 Infrared lens IR measurement
2 4-point laser Measuring spot marking
3 Humidity probe (only H1) Measures the relative humidity
4 Trigger - Switches the instrument on.
- Starts / ends a measurement.
5 Battery compartment Contains 3x AA batteries.
6 USB interface / probe
connection socket
- For connecting the instrument to the PC to
connect to the EasyClimate software.
- Connection of a probe.
7
8 ESC Takes the user a step back in the menu selection.
9
10
11
- Joystick for confirming a selection.
- For navigating in the menu
Switches the testo 835 on or off.
Saves the measured readings.
Setting emissivity
12 HOLD / SCAN - Scan: while the trigger is held down and the
measurement is carried out.
- Hold: displays the measured values.
13 Time Displays the current time.
14 Reading display Displays the measured readings.
Max
[°C/°F]
Min
[°C/°F]
Surface temperature (IR)
Max. IR temperature
IR temperature
Min. IR temperature
Differential (surface temperature - external probe
temperature)
TC temperature
IR temperature
Temperature difference TC / IR measurement
TC probe must be connected.
[%RH]
[°C/°F]
[°Ctd/°Ftd])
Humidity measurement (environment + dewpoint +
IR) (only H1)
Ambient humidity
IR temperature
Ambient dewpoint temperature
Element Function
[%RH]
[°C/°F]
[°Ctd/°Ftd])
Max
[°CDtd/°FDtd]
Min
Max
aw[-]
Min
Humidity measurement (environment and
dewpoint) – ambient temperature (only H1)
Ambient humidity
Ambient temperature
Ambient dewpoint temperature.
Dewpoint distance measurement (only H1)
Temperature difference IR minus dewpoint max
current
min.
Surface moisture measurement (only H1)
Surface moisture max.
current
min.
Calculated from dewpoint, ambient air and
surface temperature
- 0.00 - 0.64: non-critical
- 0.65 - 0.80: poss. critical
- 0.81 - 1.00: critical
15 Displays the battery charge status.
16 Displayed if alarm is switched on.
17 Displays the selected emissivity.
18 Displayed if laser is switched on.
Connecting the thermocouple probe
1 - Connect the connecting plug to the probe socket (6).
Switching the instrument on
1
- Press (9).
- OR
- Press Trigger (4).
Switching the instrument off
1
- Hold down (9) until the display goes off.
If no button is pressed for 2 minutes, the instrument switches off
automatically.
1
2
Carrying out the measurement
1 - Hold down Trigger (4).
2 - Release Trigger (4) to end the measurement.
3
- Move (7) up / down to change the reading display.
Making settings
1
- Press (7) to open the menu.
2
- Move and press (7) to select the menu item.
3
- Moving and pressing (7) applies the settings.
Setting the emissivity
Materials have various emissivities, i.e. they emit various amounts of
electromagnetic radiation. The emissivity of the instrument has a default
setting of 0.95. This is ideal for the measurement of non-metals (paper,
ceramic, gypsum, wood, paints and varnishes), plastics and foodstuffs.
1
- Press (11).
2 - For Customise manual and Customise auto,
move (7) right to enter the emissivity.
For Customise auto, please refer to the instruction manual.
3
- Press (7) to confirm the selected emissivity.
Creating a storage location and saving readings
Measuring lens
(Ratio of distance: measuring range)
Depending on the distance of the measuring instrument from the measurement
object, a specific measuring range is recorded.
In italics = laser
Not in italics = measuring range
Managing the measurement data and other measurement options
Please download the free testo EasyClimate software for managing and archiving
your measurement data and for carrying out an online measurement.
You will find the link to download it here: www.testo.com/download-center
testo 835-H1
short instruction
www.testo.com
1
- Press (10) to open the memory function.
2 - Select New Location.
3
- Move (7) up / down or right / left to name the storage location.
4 - Confirm storage with .
3
These brief instructions describe the basic operating steps. Please refer to
the instruction manual to find out how to handle the product safely and for
detailed information.
Loading...