Testo 177 Data sheet

testo 175 / 177
Log, Save, Print and Analyze Data On-Site Quickly and Efficiently
°F
%RH
td
mA/V
1 testo 175 or testo 177
With wall holder and lock
2 testo 580
a. The logger data can now be transferred on-site b. The collected data can be downloaded to PC
3 testo 575
The practical printer enables you to print the logger data on location
4 Interface
a. If required a notebook can still be used on-site b. Used to download data to a PC
5 Windows
®
compatible software
With e-mail function
2
5
4b
4a
The NEW testo 175 / 177 data logger series
The testo 175 series consists of six compact data loggers, which measure temperature, humidity, voltage and current. The testo 177 series consists of five instruments suitable for wide ranging and especially long-term applications. All the loggers have a display and immediately provide a quick overview of the current reading, the last value saved, maximum and minimum value and the number of times a limit has been exceeded. The testo 580 data collector, and the flexible testo 575 fast printer, each suitable for all the data loggers, opens up a whole new scope of possibilities for dealing with data collection.
testo 580 - the on-site data collector
The testo 580 is a unique data collector which allows stored data to be transferred from the logger on-site without interrupting operation. It can also stop and reprogram several loggers on-site. The complete memory of the testo 177 data logger or 175 data logger is transferred in seconds, (approx. 400 values per second) via infrared interface. All values collected by the data collector can later be downloaded to a PC and analyzed using the Windows compatible Testo ComSoft 3 Software.
testo 575 - the fast on-site printer
The testo 575 prints up to six lines per second in table or graph format. The stored data is transferred on-site via infrared without interrupting operation and enables fast and convenient on-site documentation without using a PC. Due to Testo’s development of this revolutionary concept it is possible to program the logger without a PC or notebook.
Simple... Fast... Practical...
Time saving, highly flexible data handling on-site
3
2b
2a
1
3
Secure... Reliable... Accurate...
Safe memory storage
With the new testo 175 / 177 data logger series your secure in the knowledge that vital data will never be lost or changed when the battery is either spent or replaced. Using Testo’s Software, battery life can be calculated over the course of several years and consequently changed by the user in the field when necessary without worrying about interruping data logging operation and documentation.This is a real advantage for safe measurements in any application.
Always reliable
All of the data loggers have a real-time clock (RTC). The rugged ABS casing with non-skid/non-rigid surface guarantees protection from moisture and mechanical strain. Some of the loggers can even be submersed for short periods of time. The loggers are also tamperproof when you use the wall bracket and lock options.
NIST calibration certificates
In many industries, such as pharmaceuticals, using calibrated and/or certified instruments is mandatory. Testo can calibrate all of its loggers to the highest possible standards. Testo is recognized worldwide for its combination of DKD calibration laboratories, accredited to ISO 17025, for temperature, relative humidity, velocity and pressure and ISO/NIST calibrations. These are a lower cost alternative to DKD calibrations, and are accepted by many audits in accordance with ISO 9001, HACCP, GMP, FDA, VDA 6.1, ISO TS 16949 etc. See summary of certificates on page 14.
Windows
®
compatible software
Testo software, ComSoft 3 Basic and ComSoft 3 Professional, has all the functions needed to operate your logger quickly and accurately. The loggers can be started manually or pre-programmed to start using date and time. The logger can be stopped in several ways: when a certain number of measurements have been reached, according to a pre-programmed date or time, when the memory is full, manually via PC, or using either the testo 575 printer or the testo 580 data collector. The wraparound memory program enables “continuous measurements” meaning the oldest values are written over.
Worry Free
Meas. range -31 to +160 °F Memory 7,800 readings
1 channel temperature logger with internal sensor
testo 175-T1
2 channel temperature logger with internal sensor/external probe socket
testo 175-T2
Meas. range -58 to +1832 °F (Type K)
-58 to +750 °F (Type T)
Memory 16,000 readings
2 channel temperature logger for external thermocouples
testo 175-T3
4
Overview
testo 175 Series
Compact data loggers for temperature, humidity, voltage and current
• Memory for up to 16,000 readings
• Maximum 2 channels
• Measuring rate: 10 sec to 24 hr
• Battery life: > 2.5 years *
• LCD display versions, 1 line
• Dimensions: 3.25 x 2 x 1.2 in
• All loggers can be calibrated (ISO and NIST)
* at a measuring rate of 15 min (+14 to +122 °F)
IP 68 IP 54IP 68
Meas. range 0 to 100 %RH
14 to +120 °F
Memory 3,700 readings
2 channel humidity/temperature data logger with internal sensors
testo 175-H1
Meas. range 0 to 100 %RH
-4 to +160 °F
Memory 16,000 readings
2 channel humidity/temperature logger with internal sensors
testo 175-H2
Meas. range 0 to 1 V / 0 to 10 V
0 to 20 mA / 4 to 20 mA Memory 16,000 readings Meas. rate 1 s to 24 hr
1 channel current/voltage logger testo 175-S1
Meas. range -31 to +160 °F (internal)
-40 to +250 °F (external)
Memory 16,000 readings
°F
°F
%RH
°F
%RH
mA/V
°F °F
See page 6 for details
See page 8 for details See page 8 for details See page 7 for details
See page 6 for details See page 7 for details
5
IP 54
°F °F
%RH
dew
point
°F °F °F
4 channel temperature logger for external thermocouples
testo 177-T4
Meas. range, inter.: 0 to 100 %RH;
-4 to +160 °F
-40 to +160 °F td;
exter.: -40 to +250 °F
Memory: 48,000 readings
Meas. range -40 to +160 °F Memory 48,000 readings
1 channel temperature logger with internal sensor for long-term monitoring
testo 177-T1
1 channel temperature logger with internal sensor for long-term monitoring
testo 177-T2
Meas. range -40 to +160 °F (internal)
-40 to +250 °F (external)
Memory 48,000 readings
3 channel temperature logger with event logging
testo 177-T3
Overview
testo 177 series
Professional data loggers for long-term and multi-channel temperature and humidity measurement
All on-site, convenient and easy to use testo 575 Fast Printer testo 580 Data Collector
Fast Printer
testo 575
Printer type: Thermal line printer with graph function and data transfer via infrared
Data Collector
testo 580
Memory capacity:
1 MB (approx. 500,000 values)
• Memory for up to 48,000 readings
• Maximum 4 channels
• Measuring rate: 2 sec to 24 hr
• Battery life: > 5 years *
• LCD display version, 2 line
• Dimensions: 4 x 2.5 x 1.3 in (casing without probe)
• All loggers can be calibrated (ISO and NIST)
* at a measuring rate of 15 min (+14 to +122 °F)
IP 68
IP 67
IP 68
IP 43 IP 54
Meas. range -319 to +1832 °F (Type K)
-328 to +750 °F (Type T)
Memory 48,000 readings
Meas. range -40 to +160 °F Memory 48,000 readings
4 channel humidity/temperature logger with int. sensors and additional ext. probe socket
testo 177-H1
See page 9 for details
See page 10 for details See page 11
See page 12
See page 9 for details See page 10 for details
6
1 channel temperature logger with internal sensor
testo 175-T1
Easy, affordable temperature monitoring
• During transport
• In refrigerated rooms
• In display cabinets
• In containers
• For monitoring rooms
Technical data
Parameter
Sensor
No. of channels
Measuring range
Resolution
Accuracy/System ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight
Protection class
Temperature (°C/°F)
NTC (internal)
1 channel (internal)
-31 °F to +160 °F
0.1 °F of -4 to +160 °F
0.3 °F in remaining range
±0.9 °F (-4 to +160 °F) ±1.8 °F (-31 to -4 °F)
7,800 readings
-31 °F to +160 °F
-40 °F to +185 °F
Lithium (1AA)
3 oz
IP 68
Technical data
Parameter
Sensor
No. of channels
Measuring range
Resolution
Accuracy/System Internal: ±1 digit
Accuracy/Instr. External: ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight
Protection class
Temperature (°C/°F)
NTC (internal + external)
2 channels (1int./1ext.)
-31 °F to +170 °F(intern.)
-40°F to +250 °F (extern.)
0.9 °F of -40 to +160°F
0.3 °F rem. range
±0.5 °F (-4 to +160 °F) ±1.8" °F (-31 to -4 °F)
±0.5 °F (-13 to +160 °F) ±0.5 °F rem. range
16,000 readings
-31 °F to +160 °F
-40 °F to +185 °F
Lithium (1AA)
3 oz.
IP 68
Monitor product and air temperature simultaneously
• During transport
In refrigerated rooms
• In containers
• During production
°F
°F
testo 175-T1
1 channel temperature logger with internal sensor, wall holder and calibration certificate
Part no. 0563 1754
testo 175-T2
2 channel temperature logger with internal sensor and external probe socket, wall holder and calibration protocol
Part no. 0563 1755
2 channel temperature logger with internal sensor/external probe socket
testo 175-T2
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
ComSoft 3 - Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder and PC conn. cable
0554 1759Part no.
testo 575 fast printer
0554 1775Part no.
testo 580 data collector incl. readout holder for logger
0554 1778Part no.
Probes on page 15
Accessories and Calibration Certs./ P. 14
Ordering data/Accessories
ComSoft 3 - Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder and PC conn. cable
0554 1759Part no.
testo 575 fast printer
0554 1775Part no.
testo 580 data collector incl. readout holder for logger
0554 1778Part no.
T STO_USA.qxd 09.04.03 17:18 Sei e 6
7
°F
mA/V
Fast 2 channel temperature monitoring in
• Heating appliances
• Domestic housing
• Metal processing
• Production
• Technical laboratories
Technical data
Parameter
Sensor
No. of channels
Measuring range
Resolution
Accuracy/Instr. (without probes) ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight
Protection class
Temperature (°C/°F)
T/C-Type K or T (external)
2 channels (external)
-60 °F to +1832 °F (Type K)
-60 °F to +750 °F (Type T)
0.1 °F
±0.9 °F (-60 to +160 °F) ±0.7% of reading (160 to +1832 °F)
16,000 readings
32 °F to +160 °F
-40 °F to +185 °F
Lithium (1/2 AA)
3 oz
IP 54
1 channel current/voltage logger
testo 175-S1
2 channel temperature logger for external thermocouples
testo 175-T3
Technical data
Parameter
No. of channels
Measuring range
Resolution
Accuracy/System ±1 digit
Memory
Probe
Application temp.
Storage temp.
Battery type
Weight
Current/voltage
1 channel (external)
0 to 1 V / 0 to 10 V 0 to 20 mA / 4 to 20 mA
1 mV (0 to 1 V) 10 mV (1 to 10 V)
0.01 mA (0 to 20 mA) ± 2 mV(0 to 1 V) ± 20 mV(1 to 10 V) ± 0.05 mA(0 to 20 mA)
16,000 readings
Built-in screwed contact socket
13 °F to +120 °F
-40 °F to +160 °F
Lithium (1/2 AA)
3 oz
Easy current/voltage monitoring in
• Industrial processes
• Laboratories
• Control systems
• Development
• Production
• Transmitter outputs
testo 175-S1
1 channel current/voltage logger with external terminal screws, wall holder and calibration
certificate
Part no. 0563 1759
testo 175-T3
2 channel temperature logger with external thermocouples, wall holder and calibration
certificate
Part no. 0563 1756
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
Accessories and Calibration Certs./ P. 14
Ordering data/Accessories
Probes on page 15
CCoommSSoofftt 33
- Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1759Part no.
tteessttoo 557755 ffaasstt pprriinntteerr
0554 1775Part no.
tteessttoo 558800 ddaattaa ccoolllleeccttoorr incl. readout holder for logger
0554 1778Part no.
CCoommSSoofftt 33 -- BBaassiicc SSeett,,
easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1759Part no.
tteessttoo 557755 ffaasstt pprriinntteerr
0554 1775Part no.
tteessttoo 558800 ddaattaa ccoolllleeccttoorr incl. readout holder for logger
0554 1778Part no.
T STO_USA.qxd 09.04.03 17:18 Sei e 7
8
°F
%RH
°F
%RH
2 channel humidity/temperature logger with internal sensors
testo 175-H1
2 channel humidity/temperature logger with internal sensors and display
testo 175-H2
Technical data
Parameter
Sensor
No. of channels
Measuring range
Resolution
Accuracy/System ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight
Humidity/ Temperature
Humidity sensor / NTC (internal)
2 channels (internal %RH; °F)
0 to 100 %RH
-4 °F to +160 °F
0.1 %RH / 0.1 °F
±3 %RH ±0.9 °F
16,000 readings
-4 °F to +160 °F
-40 °F to +185 °F
Lithium (1/2 AA)
3 oz
Efficient monitoring of humidity/temperature values in
• Industrial processes
• Domestic housing
• Offices
• Warehouses
• Museums
testo 175-H2
2 channel humidity/temperature logger with internal sensors, digital display, wall holder and calibration cetificate
Part no. 0563 1758
Technical data
Parameter
Sensor
No. of channels
Measuring range
Resolution
Accuracy/System ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight
Humidity/Temperature
Humidity sensor/ NTC (internal)
2 channels (internal %RH; °F)
0 to 100 %RH 14 °F to +120 °F
0.1 %RH / 0.1 °F
± 3 %RH ± 0.9 °F
3,700 readings
14 °F to +120 °F
-40 °F to +160 °F
Lithium (1/2 AA)
3 oz
Affordable monitoring of humidity/temperature values in
• Warehouses
• Domestic housing
• Museums
• Industrial processes
• Mechanical engineering
testo 175-H1
2 channel humidity/temperature logger with internal sensors, wall holder and calibration
certificate
Part no. 0563 1757
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
ComSoft 3 - Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1759Part no.
testo 575 fast printer
0554 1775Part no.
testo 580 data collector incl. readout holder for logger
0554 1778Part no.
ComSoft 3 - Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1759Part no.
testo 575 fast printer
0554 1775Part no.
testo 580 data collector incl. readout holder for logger
0554 1778Part no.
T STO_USA.qxd 09.04.03 17:19 Sei e 8
9
°F
°F
1 channel temperature logger w/ int. sensor for long-term monitoring
testo 177-T1
Technical data
Parameter
Sensor
No. of channels
Measuring range
Resolution
Accuracy/System ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight
Protection class
Temperature (°C/°F)
NTC (internal)
1 channel (internal)
-40 °F to +160 °F
0.1°F
±0.7 °F; -13 to +160 °F ±1.4 °F; -40 to -13 °F
48,000 readings
-40 °F to +160 °F
-40 °F to +185 °F
Lithium (1AA)
4.3 oz.
IP 68
Long-term temperature monitoring with temperature display for
• Refrigerated rooms
• Warehouses
• Domestic housing
• Containers
• Transport
testo 177-T2
1 channel temperature logger with internal sensor, digital display, wall holder and calibration certificate
Part no. 0563 1772
Technical data
Parameter
Sensor
No. of channels
Measuring range
Resolution
Accuracy/System ±1 digit
Memory
Application temp.
Storage temp.
Battery life
Weight
Protection class
Temperature (°C/°F)
NTC (internal)
1 channel (internal)
-40 °F to +160 °F
0.1 °F
±0.7 °F; -13 to +160 °F ±1.4 °F; -40 to -13 °F
48,000 readings
-40 °F to +160 °F
-40 °F to +185 °F
Lithium (1AA)
4 oz
IP 68
Long-term temperature monitoring in refrigeration and deep-freeze
• Freezer rooms
• Warehouses
• Refrigerated rooms
• Transport
• Containers
testo 177-T1
1 channel temperature logger with internal sensor, wall holder and calibration certificate
Part no. 0563 1771
1 channel temperature logger with internal sensor and display for long term monitoring
testo 177-T2
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
CCoommSSoofftt 33
- Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1774Part no.
tteessttoo 557755 ffaasstt pprriinntteerr
0554 1775Part no.
tteessttoo 558800 ddaattaa ccoolllleeccttoorr sseett incl. readout holder for logger
0554 1778Part no.
CCoommSSoofftt 33
- Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1774Part no.
tteessttoo 557755 ffaasstt pprriinntteerr
0554 1775Part no.
tteessttoo 558800 ddaattaa ccoolllleeccttoorr incl. readout holder for logger
0554 1778Part no.
T STO_USA.qxd 09.04.03 17:19 Sei e 9
10
°F
°F
3 channel temperature logger with event logging
testo 177-T3
4 channel temperature logger for external thermocouples
testo 177-T4
Technical data
Parameters
Sensors
No. of channels
Measuring range
Resolution
Accuracy/Instr. ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight Protection class
Temperature (°C/°F)
T/C-Type K or T (4 x external)
4 channels (external)
Type K: -319 °F to +1832 °F Type T: -328 °F to +750 °F
0.1 °F
±0.3 °F; -150 to +160 °F ±1% m.v. (-328 °F to 212 °F) ±0.5% of reading; +160 to +1832 °F
48,000 readings
32 °F to +160 °F
-40 °F to +185 °F
Lithium (1AA)
4.5 oz
IP 43
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
testo 177-T4
4 channel temperature logger for external thermocouples, wall holder and calibration
certificate
Part no. 0563 1774
Fast measurement of high temperatures in
• Harderning bays
• Mechanical engineering
• In production processes
• Heating installation
• Laboratories
• Low temperature measurement up to -148 °F
Technical data
Parameter Sensor
No. of channels
Measuring range
Resolution Accuracy/System
Internal: ±1 digit Accuracy/Instr.
External: ±1 digit Memory Application temp. Storage temp. Battery type Weight Protection class
Temperature (°C/°F) NTC (int. + 2 external)
Event logging i.e. door contact
4 channels (1 int.; 2 ext.;) + 1 door contact (external)
-40 °F to+160°F (internal)
-40 °F to+250 °F (extern)
0.1 °F ±0.7 °F; -13 to +160 °F
±1.4 °F; -40 to -13 °F ±0.4 °F; -13 to +160 °F
±0.7 °F rem. range
48,000 readings
-40 °F to +160 °F
-40 °F to +185 °F Lithium (1AA)
4.5 oz IP 67
Multi-channel temperature logger with display for monitoring transport
• Transport logs
Refrigerated room logs
• Warehouses
• Containers
testo 177-T3
3 channel temperature logger with internal sensor, 2 probe sockets, door contact, wall holder and calibration certifica
Part no. 0563 1773
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
Probes on page 15
Probes on page 15
CCoommSSoofftt 33
- Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1774Part no.
tteessttoo 557755 ffaasstt pprriinntteerr
0554 1775Part no.
tteessttoo 558800 ddaattaa ccoolllleeccttoorr incl. readout holder for logger
0554 1778Part no.
CCoommSSoofftt 33
- Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1774Part no.
tteessttoo 557755 ffaasstt pprriinntteerr
0554 1775Part no.
tteessttoo 558800 ddaattaa ccoolllleeccttoorr incl. readout holder for logger
0554 1778Part no.
T STO_USA.qxd 09.04.03 17:20 Sei e 10
11
°F
%RH
dew point
Technical data
Parameters
Sensors
No. of channels
Measuring range
Resolution
Accuracy/System Internal: ±1 digit
Accuracy/Instr. External: ±1 digit
Memory
Application temp.
Storage temp.
Battery type
Weight
Protection class
Humidity/Temperature/ Dew point
Humidity sensor/ NTC (internal) NTC (external)
4 channels (3 x int. %RH; °F, °F td) (1 x external °F)
0...100 %RH
-4 to +160 °F (internal)
-40 to +160 °F td
-40 to +250 °F (external)
0.1%RH/0.1 °F/0.1 °F td
± 2%RH ± 0.9 °F;
± 0.4 °F; -13 to +160 °F ± 0.7 °F; rem. range
48,000 readings
-4 °F to +160 °F
-40 °F to +185 °F
Lithium (1AA)
4.6 oz
IP 54
testo 177-H1
4 channel humidity/temperature logger with int. sensors and additional external probe socket, wall holder and calibration cetificate
Part no. 0563 1775
4 channel humidity/temperature logger with internal sensors and external probe socket
testo 177-H1
Ideal for air humidity and temperature monitoring
• In domestic buildings (See photo opposite)
• In greenhouses
• In clean rooms
• In warehouses
• During production
• In computer rooms
• In museums
Accessories and Calibration Certs./P. 14
Ordering data/Accessories
Probes on page 15
Advantages of the testo 177-H1 data logger
• External humidity sensor resulting in fast response time
• Extensive range of temperature probes
• Measure dew point difference via connectable surface temperature probe
• Easy field calibrations
• Various protective caps available for dirty, wet or corrosive areas
Advantages of the testo humidity sensor
The Testo humidity sensor, has been tried and tested throughout the world. Its use in Testo data loggers ensures:
• Accuracy
• Long-term stability
• Temperature resistance and
• Ruggedness
Is moisture in a building the problem?
Easily detect potential ventilation problems
Moisture on ceilings and walls can be caused by poor construction or more often by poor ventilation. Long-term measurement with a testo data logger will help diagnose the problem. The data logger calculates the difference between the wall surface temperature and the dew point temperature of the ambient air. If the walls are still moist and the dew point temperature is consistently higher than the wall surface temperature it’s a sure indication of an insulation and or ventilation problem.
CCoommSSoofftt 33
- Basic Set, easy-to-use software with diagram and table function, interface for logger incl. desk-top holder, and PC conn. cable
0554 1774Part no.
tteessttoo 557755 ffaasstt pprriinntteerr
0554 1775Part no.
tteessttoo 558800 ddaattaa ccoolllleeccttoorr incl. readout holder for logger
0554 1778Part no.
T STO_USA.qxd 09.04.03 17:20 Sei e 11
12
Prints and analyzes data on-site without a PC
testo 575 printer and logger control in one
The pocket-size testo 580 data collector transfers data on-site from loggers for PC download later
Technical data
Memory capacity
Read out time in logger
Read out time/PC
Logger interface
PC interface
Operating temp.
Storage temp.
On/Off switch
Functions:
Display
Other:
Power
Casing
1MB (ap. 500,000 values)
Approx. 400 readings/sec
Approx. 1.500 readings/s
IR transfer, bidirectional
RS 232 (Sub_D socket)
-22 to +160 °F;
-40 to +185 °F
Off: Auto (after. 1 min)
Memory occupied/ Logger
Memory occupied/ testo 580
Battery life: Logger
Battery life: testo 580
Data transfer in progress
Data transfer ok or defective
Wraparound/Display
Data secure even if battery is spent
3x micro AAA cells
ABS (black)
• Downloads the complete memory of a testo 175/177 at the touch of a button
• Displays all status information
• Can transfer up to 25 full testo 175 loggers or 10 full testo 177 loggers
• Downloads the collected data to PC via ComSoft 3 Software.
Control function
• Stops loggers
• Rebooting of logger possible
• Both control functions can be blocked via PC
testo 580 - Data collector
testo 575
infrared thermal line printer with graph function, incl. 1 roll of thermal paper and batteries
Part no. 0554 1775
Quickly print data on site and even restart loggers without connecting to a PC with this unique multifuncition testo 575 printer
Technical data
Printer
Contrast
Paper width
Roll diameter
Paper
Number of characters/line
Graph resolution
Operating temp.
Storage temp.
Power
Battery life
Battery change
Casing
Infrared thermal line printer with graph function
Can be adjusted
2.2 in
Up to 1.4 in
Standard paper and two layer-adhesive
24
203 dpi
23 to +120 °F (for 5 min at -22 °F)
-22 to +160 °F
6x round cell 1AA
Up to 40,000 print lines
By user
ABS (black), with “Soft-Protect“ inserts
Collects and transports data to PC
testo 580 compact data collector
testo 580
data collector incl. readout holders for testo 175/177 data loggers
Part no. 0554 1778
Control functions
• Stops testo 175/177 loggers
• Restarts logger with saved parameters (reprogramming)
• Both buttons can be blocked by PC software
Printer and Logger Control In One
Print functions
• Fast-action print mechanism prints up to 6 lines per second (up to 40 readings/s)
• Easy to insert paper
• Prints tables at the touch of a button
• Prints graphs at the touch of a button
• Brief information or complete memory can be printed as needed
• A time mark can be set in the logger at the touch of a button, the printer recognizes what is to be printed
• Works for all Testo measuring instruments with print function
• Language options
• Optional self-adhesive paper available
T STO_USA.qxd 09.04.03 17:20 Sei e 12
13
Basic and Professional
Testo ComSoft Software and Interface
Interface
for testo 175 /177 incl. desk-top
holders for testo 175/177, PC connection cable (for ComSoft 3 - Professional, please order)
Part no. 0554 1757
testo 175 and testo 177 data loggers
The testo 175 and testo 177 data loggers are read out and newly programmed at the serial interface of the PC. Due to the fast data transfer speed (500 values/second) even full loggers are read out in no time. The interface is non­contact (infrared) so there are no confusing wire connections. The actual readout unit can be snapped onto attached loggers and then read out on-site.
Convenient, Easy-to-use Software for Windows 95, 98, NT, ME, XP
• ComSoft 3 - Basic:
Reads out, displays, prints and programs all testo 175 and 177 loggers; with e-mail function
• ComSoft 3 - Professional:
Saves data in a tree structure for easy and convenient data management.
ComSoft 3 - Professional
with data management incl. database, analysis and graph function, data analysis, trend curve (w/o interface)
Part no. 0554 0830
Once the data logger is programmed and read out, data can be easily analyzed and saved using a choice of Windows compatible ComSoft 3 software.
ComSoft 3 - Basic Version: Easy operation, convenient analysis
The Basic version has all the functions needed to monitor, analyze, save and print data. The data loggers are programmed and read out using the instrument drivers available. The limit values to be monitored can be defined as required; short titles, text fields and channel names ensure clear location if several loggers are in use. Once read out, the data can be shown in table or graph form and then analyzed. The crosshair function helps you to find specific readings in a large file. The course of the line is scanned with the crosshair and number, date, time and reading are displayed. During programming, e-mail addresses can be input so that data can be easily forwarded through your locally installed e-mail program by simply clicking “Send” while the data is being read out. The saved e-mail address is entered in the address box.
Additional functions:
· Axes can be scaled as required
· Frequently used scales can be saved
for future use
· Min/max and mean calculation in
tables
· Printout as table or graph on all
printers compatible with Windows
· Data export to other applications via
clipboard
· Automatic search for instrument
driver during initial operation (Autodetect)
ComSoft 3 - Professional Version: Convenient data filing included
The Professional version has all the functions of the Basic version plus: digit field, bar display, analogue instrument, xy display, and a convenient data filing function. Data can be saved in separate files so that, for example, several data loggers from different locations can be organized in a tree structure. This is critical for instruments which can manage many measurement protocols, such as, the testo 580 data collector. The driver in this instrument is set up so that the directory structure of the Professional software is supported. The result is clear and comprehensible data handling.
Additional functions:
· Additional display options such as
digit field, bar display, analogue instrument and xy plot
· Adaptation of menu and
range of functions
· Input of mathematical functions with
calculation on a new measurement channel
· Compensation functions 0 (mean) to
7th degree
· Selection of different print heads for
printing tables and graphs
· Developer ToolBox with functions to
integrate the instrument driver in non-Testo software
ComSoft 3 - Basic
for testo 175 Easy software with diagram
and table display, interface incl. desk-top holder and PC conn. cable
for testo 177
Part no. 0554 1759
Part no. 0554 1774
T STO_USA.qxd 09.04.03 17:20 Sei e 13
14
Description Part no.
testo 580 data collector
incl. readout holders for testo 175/177 loggers
0554 1778
testo 575 fast printer, infrared thermal line printer with graph function, incl. 1 roll of thermal paper and batteries
0554 1775
Spare thermal paper for printer (6 rolls/pkg.) 0554 0569
ComSoft 3 - Basic Set for testo 175, easy-to-use software with
diagram and table display, interface incl. desk-top holder
0554 1759
ComSoft 3 - Basic Set for testo 177, easy-to-use software with diagram and table display, interface incl. desk-top holder
0554 1774
ComSoft 3 - For requirements in accordance with CFR 21 Part 11, incl. data­base, analysis and graphics function, data analysis, trend curre (without interface)
0554 0821
ComSoft 3 - Professional with data management incl. database, analysis and graph function, data analysis, trend curve (without interface)
0554 0830
Interface for testo 175 /177 incl. desk-top holders for testo 175/177, PC connection cable (required for ComSoft 3 - Professional)
0554 1757
Battery 3.6 V / 1,9 Ah 1AA; for testo 175-T1/175-T2 and all testo 177 loggers
0515 0177
Lock for wall holder for testo 175 / 177 data loggers 0554 1755
Battery 3.6 V / 0.8 Ah 1/2 AA;
for testo 175-T3/175-H1/175-H2/175-S1
0515 0175
Transport case for up to 5 testo 175 data loggers, testo 575 printer testo 580 data collector and accessories
0516 1750
Transport case for up to 5 testo 177 data loggers, testo 575 printer, testo 580 data collector and accessories
0516 1770
Description Part no.
Calibration Certificates:
Ordering Information
testo 175/177
testo 175-T1 logger with display, 1 channel temperature logger with internal sensor, wall holder and calibration certificate
0563 1754
testo 175-T2 logger with display, 2 channel temperature logger with int. sensor and ext. probe socket, wall holder and calibration certificate
0563 1755
testo 175-T3 logger with display, 2 channel temperature logger for external thermocouples, wall holder and calibration certificate
0563 1756
testo 175-H2 logger with display, 2 channel humidity/temperature logger with internal sensors, wall holder and calibration certificate
0563 1758
testo 175-S1 logger without display, 1 channel current/voltage logger with ext. terminal screws, wall holder and calibration certificate
0563 1759
testo 175-H1 logger without display, 2 channel humidity/temperature logger with internal sensors, wall holder and calibration certificate
0563 1757
testo 175/177 data loggers
testo 177-T1 logger without display, 1 channel temperature logger
with internal sensor, wall holder and calibration certificate
0563 1771
testo 177-T2 logger with display, 1 channel temperature logger with internal sensor, wall holder and calibration certificate
0563 1772
testo 177-T3 logger with display, 3 channel temperature logger with int. sensor, 2 probe sockets, door contact, wall holder and calibration certificate
0563 1773
testo 177-T4 logger with display, 4 channel temperature logger for external thermocouples, wall holder and calibration certificate
0563 1774
testo 177-H1 logger with display, 4 channel humidity/temperature logger w/ int. sensors and additional ext. probe socket, wall holder and calibration certificate
0563 1775
0520 0261
0520 0151
ISO calibration certificate/Temperature Temp. data loggers; cal. point -112 °F
0520 0221
ISO calibration certificate/Temperature Temp. data loggers; cal. points 32 °F; +300 °F; +572 °F
0520 0021
testo 177-T1
testo 177-T2
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0261
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
testo 177-T3
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0261
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
testo 177-T4
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0261
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0171
NIST calibration certificate/Humidity Humidity data loggers; cal. points 11.3 %RH and 75.3 %RH at +77 °F; for each channel/instr.
0520 0246
ISO calibration certificate/Humidity Humidity data loggers; cal. points 11.3 %RH and 75.3 %RH at +77 °F; for each channel/instr.
0520 0076
testo 177-H1
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0261
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0261
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
testo 175-T1
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0261
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
testo 175-T2
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0261
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
testo 175-T3
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
testo 175-H1
NIST calibration certificate/Humidity Humidity data loggers; cal. points 11.3 %RH and 75.3 %RH at +77 °F; for each channel/instr.
0520 0246
ISO calibration certificate/Humidity Humidity data loggers; cal. points 11.3 %RH and 75.3 %RH at +77 °F; for each channel/instr.
0520 0076
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
0520 0151
testo 175-H2
NIST calibration certificate/Humidity Humidity data loggers; cal. points 11.3 %RH and 75.3 %RH at +77 °F; for each channel/instr.
0520 0246
ISO calibration certificate/Humidity Humidity data loggers; cal. points 11.3 %RH and 75.3 %RH at +77 °F; for each channel/instr.
0520 0076
testo 175-S1
ISO/DKD calibration certificates are possible for all loggers at freely selectable points within the measuring range. Contact us for more information.
ISO calibration certificate/Electrical Calibration via measuring ranges 0-20 mA; 4-20 mA; 0-1 V; 0-10 V
0520 1000
Spare thermal paper for testo 575 printer (6 rolls/pkg.) Long-term legible data documentation for up to 10 years
0554 0568
Label thermal paper for testo 575 printer (6 rolls/pkg.) for direct application
0554 0561
Metal protection cage for humidity probes, V4A stainless steel, for velocity below 2000 fpm
0554 0755
Cap with mesh wire filter 0554 0757
Teflon sintered filter, for corrosive substances, high moisture level (long-term measurements), high velocities
0554 0756
Stainless steel sintered caps, to be screwed onto humidity probes for measurements at high velocities or in dirty air
0554 0647
Control and humidity adjustment set 11.3 %RH / 75.3 %RH, incl. adapter for humidity probes
0554 0660
Accessories
NIST calibration certificate/Temperature Temp. data loggers; cal. points -4 °F; 32 °F; +140 °F; for each channel/instr.
ISO calibration certificate/Temperature Temp. data loggers; cal. points -0.4 °F; 32 °F; +140 °F; for each channel/instr.
T STO_USA.qxd 09.04.03 17:20 Sei e 14
15
The protection class specified for the data loggers are achieved with these probes.
Ordering Information
Stationary Probes for testo 175/177
Accurate thermocouple probes for testo 175-T3, 177-T4 data loggers
Meas. range
Description
Illustration Accuracy Sec. Part no.
Accurate NTC probes for testo 175-T2, 177-T3, 177-H1 data loggers
Meas. range
Description
Illustration Accuracy Sec Part no.
Connection Cable length
Connection Cable length
* Probe tested in accordance with EN 12830 as to suitability for transport and storage
-4 to +160 °F
±0.4 °F (-4... +104 °F)
15 s 0628 7510
Stub probe, IP 54
1.4”
dia. .12”
-4 to +190 °F
22 to 160 °F=+-0.2K rem. range +-0.5K
60 s Fixed
cable
7.9 ft.
0628 7503*
Mounting probe with aluminium sleeve, IP65
1.5”
dia. .24”
-31 to +180 °F
±0.4 °F (-13 to +170°F) ±0.7 °F (-31 to -13 °F) ±0.7 °F (+170 to +180 °F)
5 s Fixed
cable
0610 1725*
Accurate immersion/penetration probe, IP 67
1.5”
dia. .12”
dia. .12”
-60 to +160 °F
±0.4 °F (-13 to +170 °F) ±0.7 °F (-60 to -13 °F)
Fixed cable
0613 4611
Pipe probe with Velcro, for pipe diameter of max. 3”
12”
1.2”
-60 to +300 °F
±0.5% of read. (+212 to +300 °F)
±0.4 °F (-13 to +170 °F) ±0.7 °F (-60 to -13 °F) ±0.7 °F (+170 to +212 °F)
60 s Fixed
cable
0613 1711*
Rugged, affordable air probe, to check storage temperature, for example
4.3”
dia. .16”
-60 to +280 °F
±0.5% of read. (+212to +280 °F)
±0.4 °F (-13 to +170 °F) ±0.7 °F (-60 to -13 °F) ±0.7 °F (+170 to +212 °F)
20 s Plug-in
cable
0613 3211*
Frozen food probe, no drilling required
4.3”
1.2”
dia. .14”
dia. .32”
-60 to +300 °F
±0.5% of read (+212... +300 °F)
±0.4 °F (-13 to +170 °F) ±0.7 °F (-60 to -13 °F) ±0.7 °F (+170to +212 °F)
8 s Fixed
cable
0613 2211*
Food probe (IP65) made of stainless steel, PUR cable up to +180 °F can be used, IP54 plug-in connection
5”
.6”
dia. .12
dia. .16”
-60 to +300 °F
±0.5% of read. (+212 to +300 °F)
±0.4 °F (-13 to +170 °F) ±0.7 °F (-60 to -13 °F) ±0.7 °F (+170 to +212 °F)
7 s Fixed
cable
0613 2411*
Rugged food penetration probe with special handle, IP 65, reinforced cable (PUR) and reinforced bending protection
45”
1.2”
dia. .14”
.18”
20 ft.
-60 to +180 °F
±0.5% of reading
(+212 to +300 °F)
70 s Fixed
cable
0628 7514*
Screw-in probe for measurements in difficult to access places, M6 thread, IP 54
-60 to +180 °F
±0.4 °F (32 to +170°F)
150 s Fixed
cable
0628 7516*
Probe for surface measurement
.32” x .32”
-60 to +180 °F
±0.4 °F (32 to +170 °F)
20 s Fixed
cable
0628 7507
Wall surface temperature probe, i.e. as proof of damage to building material
1.5”
6 ft.
6 ft.
9 ft.
4.9 ft.
4.9 ft.
4.6 ft.
4.9 ft.
3.9 ft.
-60 to +360 °F Class 2 3 s Fixed cable
0628 7521
Mounted surface temperature probe with outer thread M 14x1.5 and 2 nuts, quick-action surface probe with cross-band
-60 to +400 °F ±1.5 20 s Fixed cable
0628 7533
Mounting probe with stainless steel sleeve
1.5”
dia. .24”
-80 to +750 °F Class 2 7 s Fixed cable
0602 1292
Water-tight immersion/penetration probe
4”
1.2”
dia.13”
dia.16”
-80 to +1832 °F Class 1 2 s Fixed cable
0602 0592
Accurate and fast immersion probe, water-tight
12”
dia..6”
32 to +250 °F Class 1 90 s Fixed
cable
0628 0020
Pipe wrap probe with Velcro, for temperature measurement on pipes with diameter to max. 4.7”, Tmax +250 °F
15.5”
.78”
-80 to +266 °F Class 2 5 s Fixed cable
0602 4592
Pipe wrap probe for pipe diameter .17” to 2.5”, with exchangeable meas. head Measuring range short-term to +540 °F
-80 to +750 °F Class 2 25 s Fixed cable
0602 1792
Robust, affordable air probe
4”
dia. .6”s
-60 to +750 °F Class 2 5 s 0602 0645
Thermocouple, flexible, 60” long, fibre glass
59”
dia. .6”
-60 to +480 °F Class 2 5 s 0602 0646
Thermocouple, flexible, 60” long, Teflon
59”
dia. .6”
-330 to +1832 °F Class 1 5 s 0602 5792
Immersion measurement tip, bendable
.20”
dia.6”
-60 to +750 °F Class 2 Fixed cable
0602 4892
Magnetic probe, adhesive force approx. 10 N, with adhesive magnets, for higher temperatures, for measurements on metal surfaces
3”
dia. .8”
6 ft.
4.9 ft.
3.9 ft.
6 ft.
5 ft.
3.9 ft.
3.9 ft.
3.9 ft.
T STO_USA.qxd 09.04.03 17:21 Sei e 15
16
Ordering Information
testo 174/175/177
Distributor:
Contact info:
Testo Inc. 35 Ironia Rd., Flanders, NJ 07836 Fax: 973-252-1729 Toll free: 800-227-0729 e-mail: info@testo.com www.testo.com
testo 575 fast printer, infrared thermal line printer
0554 1775
Spare thermal paper, 6 rolls/pkg.
0554 0568
testo 580 data collector, incl. readout holders for testo 175/177 data loggers
0554 1778
0554 1759
ComSoft 3 - Basic Set for testo 177, easy-to-use software incl. interface, desk-top holder and PC conn. cable
0554 1774
ComSoft 3 - Professional, with data management incl. database (without interface)
0554 0830
Interface for testo 175/177, incl. desk-top holders for testo 175/177 (for ComSoft 3 - Professional, please order)
ISO/NIST Calibration Certificates (see Page 14 and enter Part no.)
testo 174 data logger
Large display in a small casing which shows current reading, max./min. values, programmed limit values or battery life in days.
Secure data – even when battery is dead Measuring range: -22 to +160 °F Memory: 3900 readings
(not for use with testo 580 data collector and testo 575 printer )
0554 1757
0563 1741
0563 1742
0986 3953
0520
____________
testo 175-T1 logger with display, 1 channel temeperature logger
0563 1754
testo 175-T2 logger with display, 2 channel temeperature logger
0563 1755
testo 175-T3 logger with display, 2 channel temeperature logger
0563 1756
testo 175-H2 logger with display, 2 channel humidity/temperature logger
0563 1758
testo 175-S1 logger without display, 1 channel current/voltage logger
0563 1759
testo 175-H1 logger without display, 2 channel humidity/temperature logger
0563 1757
testo 177-T1 logger without display, 1 channel temeperature logger
0563 1771
testo 177-T2 logger with display, 1 channel temeperature logger
0563 1772
testo 177-T3 logger with display, 3 channel temeperature logger
0563 1773
testo 177-T4 logger with display, 4 channel temeperature logger
0563 1774
testo 177-H1 logger with display, 4 channel humidity/temperature logger
0563 1775
All information and pricing subject to change without notice
Qty. Description Part no.
Qty. Description Part no.
Please send me information on testostor 171:
Data logger with aluminium casing Read out and program using PALM
®
PDA
Please send me information on testo 454:
System logger with up to 200 measurement channels
ComSoft 3 - Basic Set for testo 175, easy-to-use software incl. interface, desk-top holder and PC conn. cable
0986 3963/hd/Si/04.2003
testo 174 mini temperature data logger, incl. wall holder and lock
Starter Set with testo 174 mini temperature data logger, ComSoft 3 - Basic, wall holder
and interface incl. PC connection cable
Please send me more information on testo 174
T STO_USA.qxd 09.04.03 17:21 Sei e 16
Loading...