testo 160 TH, 160 THE, 160 THL, 160 IAQ, 160 E Short instructions

Data loggers testo 160 TH testo 160 THE testo 160 THL testo 160 IAQ testo 160 E

Short instructions

				Contents
Contents
1	Safety and waste disposal .......................................................................			3
	1.1	About this document..............................................................................		3
	1.2	Symbols and writing standards..............................................................		3
	1.3	Safety	.....................................................................................................	4
	1.4	Warnings ................................................................................................		5
	1.5	Waste .......................................................................................disposal		5
2	Description ...................................................................of the instrument			5
	2.1	Use.........................................................................................................		5
	2.2	Overview ................................................................................................		6
		2.2.1 ..................................	testo 160 TH, 160 THE, 160 THL, 160 E	6
		2.2.2 ...........................................................................	testo 160 IAQ	7
3	Commissioning.........................................................................................			8
	3.1	Inserting ......................................into / removing from the wall bracket		8
	3.2	Starting ....................................................................up the data logger		8
	3.3	Logging .................................................................into the Testo Cloud		9
		3.3.1 ......................................	Configuration via the Setup assistant	9
	3.4	Status ...............................................................................LED signals		10
	3.5	Calibration............................................................................................		11
4	Technical data........................................................................................			11
5	Authorizations ........................................................................................			16

1 Safety and waste disposal

Please read this instruction manual through carefully and familiarize yourself with the product before putting it to use.

You will find detailed instructions in the login area of the respective Testo solution at: www.testo.com/login.

1 Safety and waste disposal

1.1 About this document

Use

•The instruction manual is an integral part of the instrument.

•Pay particular attention to the safety instructions and warning advice in order to prevent injuries or damage to the product.

•Keep this document to hand so that you can refer to it when necessary.

•Always use the complete original instruction manual.

•Hand this documentation on to any subsequent users of the product.

In order to be able to use certain functions of this instrument

(in particular the measurement data management), you need to accept the testo Cloud terms and conditions of use, which you will find below the login of the respective testo application at www.testo.com/login.

1.2 Symbols and writing standards

	Display	Explanation
		Hint: basic or further information
	1.	Action: several steps, the sequence must be followed.
	2.
	…
		Result of an action
		Requirements

3

1 Safety and waste disposal

1.3 Safety

General safety instructions

•Only operate the product properly, for its intended purpose and within the parameters specified in the technical data. Do not apply any force.

•Do not commission the instrument if there are signs of damage on the housing.

•Dangers may also arise from the systems being measured or the measuring environment: Always comply with the locally valid safety regulations when carrying out measurements.

•Temperatures given on probes/sensors relate only to the measuring range of the sensors. Do not expose handles and feed lines to temperatures in excess of 70°C (158°F), unless they are expressly authorized for use at higher temperatures.

•Do not carry out any contact measurements on uninsulated, live parts.

•Do not store the product together with solvents. Do not use any desiccants.

•Only perform maintenance and repair work on this instrument that is described in the documentation. Follow the prescribed steps exactly. Use only original spare parts from Testo.

Batteries

•Improper use of batteries may cause destruction of the batteries, injuries due to current surges, fire or the escape of chemicals.

•Only use the batteries supplied in accordance with the instructions in the instruction manual.

•Do not short-circuit the batteries.

•Do not take the batteries apart and do not modify them.

•Do not expose the batteries to heavy impacts, water, fire or temperatures in excess of 60 °C.

•Do not store the batteries near any metal objects.

•In the event of contact with battery acid: rinse affected areas thoroughly with water, and if necessary consult a doctor.

•Do not use any leaky or damaged batteries.

4

2 Description of the instrument

1.4 Warnings

Always pay attention to any information marked with the following warning notices along with warning pictograms. Implement the specified precautionary measures!

CAUTION

Indicates possible damage to equipment

1.5 Waste disposal

•Dispose of spent batteries in accordance with the relevant legal specifications.

•At the end of its useful life, send the product to the separate collection for electric and electronic devices (observe local regulations) or return the product to Testo for disposal.

2 Description of the instrument

2.1 Use

The testo 160 TH, THE, THL, THG, IAQ and E data loggers are handy measuring instruments for measuring temperature, humidity, CO2 concentration, illuminance and UV.

The external probes S-TH, S-LuxUV and S-Lux are only approved in conjunction with the testo 160 THE and testo 160 E data loggers.

You can find further information about proper use in the instruction manual for the testo 160 data loggers or online beneath the login of the respective testo application:

www.testo.com/login.

5