TESTO 0554 0620, 0554 0621 Instruction Manual

99 Washington Street
Melrose, MA 02176

Phone [phone]
Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Bluetooth®/IRDA printer
0554 0620/ 0554 0621

Instruction manual

2

1 Contents

1 Contents

1 Contents ................................................................................................... 3

2 Safety and the environment .................................................................... 4

3 Specifications .......................................................................................... 4

3.1. Use .................................................................................................. 4

3.2. Technical data ................................................................................. 4

EC declaration of conformity 0554 0620 ........................................................................10

EC declaration of conformity 0554 0621 ........................................................................11

4 Product description ............................................................................... 12

4.1. Overview ....................................................................................... 12

4.2. Operating mode indicator .............................................................. 13

4.3. Control key functions ..................................................................... 13

5 First steps .............................................................................................. 14

5.1. Charging the rechargeable battery ................................................ 14

5.2. Inserting paper ............................................................................... 14

6 Using the product .................................................................................. 15

3

3 Specifications

2 Safety and the environment

> Dispose of faulty rechargeable batteries/spent batteries in

accordance with the valid legal specifications.

> At the end of its useful life, send the product to the separate

collection for electric and electronic devices (observe local

3 Specifications

3.1. Use

regulations) or return the product to Testo for disposal.

The testo Bluetooth®/IRDA printer is used to produce report
printouts, in conjunction with compatible devices:
E.g. testo 330 (0632 3306 - 3307 from firmware 2.02 onwards),
testo 320 (from firmware 1.06 onwards), testo 324 (from firmware

1.08 onwards), testo 330i (0554 0621 only)

The use of the wireless module is subject to the regulations and
stipulations of the respective country of use, and the module may only
be used in countries for which a country certification has been granted.
The user and every owner has the obligation to adhere to these
regulations and prerequisites for use, and acknowledges that the re­sale, export, import etc. in particular in countries without wireless
permits, is his responsibility.

3.2. Technical data

General data

Feature Values

Model Thermal printer with Bluetooth® and IrDA

Printing speed 30 mm/s

Operating
temperature

Storage
temperature

Dimensions
(LxW xH)

4

interface

0 to +50 °C / 32 to 122 °F

-20 to +50 °C / -4 to 122 °F

150 mm x 80 mm x 41 mm

3 Specifications

g (including rechargeable battery

(LV), Lithuania (LT), Luxembourg (LU), Malta

Feature Values

Weight

approx. 400
pack, paper roll, mains unit)

EU Directive

2014/30/EC

Power supply Lithium-Ion rechargeable battery pack,

2600 mAh, 3.7 V

Thermal paper roll 56.5 mm x 34 mm x 12 mm

Rechargeable

±0 to 35 °C / 32 to 95 °F
battery storage
temperature

Rechargeable

approx. 5-6 h
battery charge time

Rechargeable

approx. 50 m report printouts
battery life

Bluetooth®

Range < 10 m
(optional)

Warranty 2 years (excl. printer mechanism,

rechargeable battery pack)

Warranty terms Warranty terms: see website

www.testo.com/warranty

Bluetooth® data 0554 0620

Feature Values

Type

Bluegiga WT12

designation

Specification 2.0

Radio class Class 2

Coverage < 10 m / < 32.8 ft.

Product note WT12

Identification B011198

Company 10274

Certification

EU countries:

Belgium (BE), Bulgaria (BG), Denmark (DK),
Germany (DE), Estonia (EE), Finland (FI), France
(FR), Greece (GR), Ireland (IE), Italy (IT), Latvia

5

3 Specifications

Feature Values

(MT), Netherlands (NL), Austria (AT), Poland (PL),
Portugal (PT), Romania (RO), Sweden (SE),
Slovakia (SK), Slovenia (SI), Spain (ES), Czech
Republic (CZ), Hungary (HU), United

Kingdom (GB), Republic of Cyprus (CY).

EFTA countries:

Iceland, Liechtenstein, Norway, Switzerland

Other countries:

Colombia, El Salvador, Turkey, Ukraine, Australia,
USA, Canada

FCC (Federal Communications Commission)
notice

- This instrument fulfils part 15 of the FCC Rules

- Its commissioning is subject to the following
two conditions:

1. this instrument must not cause any harmful

interference and

2. this instrument must be able to cope with

interference, even if this has undesirable
effects on operation.

Changes

The FCC demands that the user be informed that
any changes or modifications to the instrument
that are not explicitly approved by testo AG may
void the user's right to use this instrument.

Bluetooth® data 0554 0621

Feature Values

Type
designation

Stollmann E+V GmbH BlueMod+SR (August

2013)

Specification 4.0, Bluetooth® Classic / LowEnergy

Coverage < 10 m / < 32,8 ft.

Product note BlueMod+SR

Identification B021281

Company 44784

6

Certification

EU countries:

Iceland, Liechtenstein, Norway, Switzerland

IC Warnings

FCC Warnings

KCC Warning

Japan Information

Country Comments

3 Specifications

EU + EFTA

Belgium (BE), Bulgaria (BG), Denmark (DK),
Germany (DE), Estonia (EE), Finland (FI),
France (FR), Greece (GR), Ireland (IE), Italy
(IT), Latvia (LV), Lithuania (LT), Luxembourg
(LU), Malta (MT), Netherlands (NL), Austria
(AT), Poland (PL), Portugal (PT), Romania
(RO), Sweden (SE), Slovakia (SK), Slovenia
(SI), Spain (ES), Czech Republic (CZ), Hungary
(HU), United Kingdom (GB), Republic of Cyprus
(CY).
EFTA countries:

Australia

E1561

Turkey Authorized

India Authorized

Canada Contains FCC ID: 4957A-MSR

Product IC ID: -20160621

USA Contains FCC ID: RFRMS

Product FCC ID: WAF-20160621

Korea

Japan

7

MSIP-RMM-TE1-BTIRDA

3 Specifications

IC Warnings

This instrument complies with Part 15C of the FCC Rules and
Industry Canada RSS-210 (revision 8). Commissioning is subject to
the following two conditions:
(1) This instrument must not cause any harmful interference and
(2) this instrument must be able to cope with interference, even if
this has undesirable effects on operation.

Cet appareil satisfait à la partie 15C des directives FCC et au

standard Industrie Canada RSS-210 (révision 8). Sa mise en

service est soumise aux deux conditions suivantes :
(1) cet appareil ne doit causer aucune interférence dangereuse et
(2) cet appareil doit supporter toute interférence, y compris des

interférences qui provoquerait des opérations indésirables.

FCC Warnings

Information from the FCC (Federal Communications Commission)
For your own safety
Shielded cables should be used for a composite interface. This is to

ensure continued protection against radio frequency interference.

FCC warning statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

8

3 Specifications

Caution
Changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to
operate the equipment. Shielded interface cable must be used in
order to comply with the emission limits.

Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.

KCC Warning

해당 무선 설비는 운용 중 전파혼신 가능성이 있음

Japan Information

当該機器には電波法に基づく、技術基準適合証明等を受けた特定

無線設備を装着している。

Accessories/spare parts

Description Item no.

Mains unit 5 V / 1.0 A with micro USB cable 0554 1105

Spare thermal paper, 6 rolls 0554 0568

9

3 Specifications

EC declaration of conformity 0554 0620

10

EC declaration of conformity 0554 0621

3 Specifications

11

4 Product description

WARNING

4 Product description

4.1. Overview

12

1 Bluetooth®/infrared interface
2 Operating mode indicator
3 On/Off control key
4 Paper feed control key
5 Paper roll (printable side out)
6 Paper compartment cover
7 Magnetic holder (on back)

Magnetic field

May be harmful to those with pacemakers.

> Keep a minimum distance of 10 cm between pacemaker and

printer.

CAUTION

Magnetic field

Damage to other devices!
> Keep a safe distance away from products that could be

damaged by the effects of magnetism (e.g. monitors,
computers or credit cards).

8 Micro USB connection for connecting to the mains unit or the

4.2. Operating mode indicator

PC.

LED Function

Steady green light

• Standby mode

• Printing out print data

Flashing green light

Steady red light

• Receiving print data

• Not ready for operation

• Paper compartment cover open

• No paper inserted.

Flashing red light

Flashing red/green

• Rechargeable battery low

• Rechargeable battery is charging

light

Off

• Sleep mode, automatically activated 2
minutes after a button was last pressed

4 Product description

4.3. Control key functions

Control keys Functions

• Switch on printer:

[ ]

[ ]

13

press key < 2 s

• Switch off printer:
press key > 2 s

• Short paper feed:
press key < 1 s

• Paper feed for as long as the key is
pressed:
press key > 1 s

5 First steps

Control keys Functions

• Start a test print (printer is switched off):

[ ] and [ ]

5 First steps

press keys < 1 s simultaneously

• Bluetooth

press keys

®

module test (printer is off):

> 1 s simultaneously

5.1. Charging the rechargeable battery

The rechargeable battery can only be charged at an ambient
temperature of ±0 to +35 °C. If the rechargeable battery has been
completely discharged, charging time at room temperature using
the testo mains unit is approx. 6 h.

> Connect battery charger (0554 1105) to a mains socket and

connect the printer.

If stored for a prolonged period of time, the battery should
be charged every once in a while because otherwise this
may result in damage due to deep discharge.

Charging in the measuring instrument

1. Plug the mains unit instrument plug into the instrument's micro
USB socket.

2. Plug the mains plug of the mains unit into a mains socket.

- The charging process will start. The charging process will stop
automatically when the battery is fully charged.

Battery care

> Do not fully exhaust rechargeable batteries.

5.2. Inserting paper

1. Flip paper compartment cover up.

2. Insert paper roll, see illustration.

3. Close paper compartment cover.

14

6 Using the product

6 Using the product

Printing data

When first setting up a connection between a testo
measuring instrument and the Bluetooth / IRDA printer, the
initialization phase can last up to 30 seconds.

✓ Printer is switched on.

> Start the print process from the instrument transmitting the data.

- Data is printed out (LED flashes green).

15

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com