TESONIC MVEB User Manual

User Manual

Basic Specifications

■ Size: 31x28x9mm

■ Weight: 17.2g (Aluminum Materials)

■ Charging port: Micro USB

■ Keys: 3 (MFB button, volume+/forward button , volume- /backward button,)

■ Battery: Rechargeable lithium polymer battery 3.7V; 120mAh

■ Charging Specifications: DC 5V/80~120mA

■ Charger Output: 5V/0.5 ~ 1.0A

■ Charge Indicator: Red LED light (Charging) / Blue LED light (Charging completed)

■ Standby time: 120 hours

■ Talk time: up to 5 hours

■ Music time: up to 6 hours

■ Charging time: 2-3 hours

■ Volume control / Variable for per stage : Stage 16 / 1.5dBvariablefor per stage.

■ Operating temperature: Charging 0 ~ 40 ℃, charging than -20 ~ 60 ℃.

■ Storage temperature : -40 ~ 80 ℃.

Speaker and MIC parameters

■ Speaker Specifications / mode : Φ15.4mm, Dynamic

■ Magnet type:Nb-Fe-Be

■ Distortion:Below 0.3%

■ Impedance:32Ω/typ

■ Frequency Frequency (Hz): 20Hz ~ 20KHz

■ MIC style: Capacitive

■ MIC Sensitivity : -42 ± 3dB,Φ6.0mm

Bluetooth Parameters

■ Bluetooth version: 4.1+EDR

■ Support Profile: HSP, HFP, A2DP, AVRCP

■ The remote control to speaker: MFB ( Power ON / Power Off / Play / Pause) ;
Vol+/Next song,Vol-/Previous song.

■ Device Name: S-1

■ Pass: 0000

■ RF transmitter: class II (-6dBm ~ +4 dBm)

■ Receive sensitivity:-92dBm

■ Transmission Range (Hz): 2.40GHz ~ 2.48GHz

■ Transmission distance: 10m

Operating Instructions:

Power On:

When the headset is off, press and hold the Multi-Function Button (MFB) for 2 seconds.

The LED indicator will flash slowly in blue.The headset will be paired with the last

connected bluetooth device or mobile phone automatically when turned on.

Power Off:

When the headset is on, press and hold the MFB for 4 seconds. The LED indicator will

flash slowly in red. The headset will disconnect from your phone devices when turned off.

Pairing Mode:

When the headset is off, press and hold the MFB for 5 seconds until the LED indicator

flashes red and blue in alternating colors.

Note: If you release the MFB before the headset goes into pairing mode, it will power on

and connect with the last paired device. If you want to pair the headset with a new phone

device, please power off the headset and enter into pairing mode.

Easy Connect Function

If the headset doesn’t connect with any phone when it’s on, you will need to enter the

headset into pairing mode by pressing volume- and volume+ concurrently.

Answering Calls

If a call comes in when listening to music or headset is standing by, press the MFB to

answer the incoming call.If the music is playing, it will pause automatically during the call.

After finishing your call, the music will start playing automatically.

Reject Calls

If a call comes in when listening to music or headset is standing by, press and hold the

MFB for 2 seconds to reject the call.

End Calls