●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
NTID95AU
Safety Warnings
Product name
Dimensions
Power Source
287 (H) x 181 (W) x 84mm (D) (Main unit only)
Overheating prevention device (Thermostat and temperature fuse)
Ionic Hair Dryer
Product number NTID95AU
AC220-240V, 50/60Hz
Power consumption 1650-2000W
Warm air temperature 115°
o
C (2-HIGH, in an ambient temperature of 30°oC)
Weight
Safety features
520g (Main unit only)
Specifications
For household use only
User Manual
Ionic Hair Dryer
How to use Troubleshooting
Possible cause
Issue
Grip
Main unit and attachments
Air intake
Turn off and unplug the unit, and only begin maintenance when it is cooled down.
Remove any dust or hair with a soft brush, etc.
Maintenance
No air blows out.
A foreign object can be heard moving
inside the main unit.
Part names and functions
For the following people, the effect of negative ions may not readily appear:
*People with curly hair, twisted hair, thin and soft hair, or short hair.
*People with recently straightened hair or semi-wet hair.
When folding or
unfolding the grip, do
not place your fingers
on the shaded area.
To fold To unfold
Moist hood is removable.
*High temperatures:
Do not touch the hood while in use
or immediately after use.
3 and 2 is suitable for blow drying hair after washing,
while 1 provides a gentle airflow suitable for setting hair.
Temperature of hot air can be adjusted with air temperature
adjustment switch.
After arranging hair with hot air, switch
to cold air and apply it to the hair for
10 to 15 seconds to maintain a hair
setting for a long period of time.
●How to use the Cool shot switch
Make sure the switch is set to 0 before plugging in the unit.
Insert the power plug into an AC outlet.
Set the switch to 3, 2 or 1 and blow hair with the dryer.
Set switch to 0 after use,
and unplug the unit from the AC
outlet.
0
Cool shot switch
Switch
3
2
1
0
LED lamp
is illuminated in red
(when hot air is used)
and in green (when
cold air is used).
Air temperature adjustment switch
…
…. Temperature of
hot air is lowered
to gently blow
hair dry.
Air outlet
Bush
Power cord
Air intake
Hook
Airflow (hot/cool) can
be changed by pushing
this button
Moist hood
HIGH
LOW
Before use, please read this manual and be sure to use the
appliance properly. The manufacturer assumes no responsibility
for the appliance when it is used in ways other than the proper
method described in this manual. In particular, be sure to read the
Safety Warnings.
Store the manual in a location where it can be easily accessed at
any time.
Always use with AC220-240V.
Before use, make sure that power cord, plug and main unit are not
damaged.
After use, turn off and unplug the unit.
Do not leave the appliance with the power cord wound around the
main unit.
Do not block the air intake or outlet.
Do not look into the air outlet while it is in use.
Do not put hairpins or any other foreign objects into the air intake or
outlet.
Do not leave the appliance near bedclothes, paper or inflammable
items when it is turned on. Do not use the appliance near gas or any
other object that may catch fire.
Do not immerse the appliance in water or liquid or let it get wet. Do not
use the appliance if your hands are wet.
Do not store the appliance near a bathtub, a place of high humidity or
water.
When the appliance is used in a bathroom, unplug it after use since
the proximity of water presents a hazard even when the appliance is
switched off.
For additional protection, the installation of a residual current device
(RCD) having a rated residual operating current not exceeding 30 mA
is advisable in the electrical circuit supplying the bathroom. Ask your
installer for advice.
If the appliance does not operate normally, immediately turn it off and
unplug it.
Do not attempt to disassemble or repair the appliance. Leave repairs
to an authorized repair technician.
If the supply cord is damaged, it must be replaced by the manufacture, its service agent, or similarly qualified persons in order to avoid a
hazard.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Do not use the appliance in a place that is accessible by children. Do
not store the appliance in a place where children can reach it.
Do not touch the appliance with any hair-coloring agents.
Do not drop the unit or subject it to strong shocks. Do not pull the
power cord.
Always hold the hair dryer at least 10cm away from hair. Pay attention
so that hair is not pulled into the air intake while in use.
Clean the air intake regularly (at least once a month). Do not use
alcohol, benzin or nail polish remover to clean the appliance.
Do not use the appliance for/in a work environment. Do not store it in
a location that is accessible by an unspecified large number of people.
Negative ions generated by dryer protect
cuticles
Wipe away stains gently with a dry and soft cloth.
If stains persist, wipe with a soft cloth immersed in soapy water
or neutral detergent diluted with water, only after wringing well.
Blows hot and cool air.
Sparks can be seen
from the air outlet.
(Sparks are caused by
the operation of the
safety device).
The main unit or hot air
is abnormally hot. The
inside of the main unit
becomes red or
generates smoke.
Air comes out but stops
from time to time.
The end of the power
cable or power plug is
deformed or damaged.
The power cable is
twisted and does not
return properly.
Power plug is
abnormally hot.
Dust or hair is
attached to the air
intake.
Clean the air intake. If the
problem persists, stop
using the dryer immediately.
Air intake is blocked.
The safety device is
not operating normally.
Power cable is broken.
The power cable is
about to get
disconnected.
The plug is connected
to the AC outlet in a
loose manner.
Use the unit without
blocking the air intake. If
the problem persists,
stop using the dryer
immediately.
stop using the dryer
immediately.
The AC outlet may have
a problem. Consult your
electrician.
Power cord length
1.7m
Normal operation
Solution
NSW27578 6441-1
表面
裏面
Loading...