Teryair ENS100V, ENS200V Operation And Maintenance Manual

Operation and Maintenance Guide

Electric Needle Scalers

Models Covered

Model Number Description

ENS100V Electric Needle Scaler, 110V-1ph

ENS200V Electric Needle Scaler, 220V-1ph

Read this manual carefully before installing, operating or servicing this

Scaler

. It’s the responsibility of the employer to ensure this manual

is read by the operator.

Please preserve this manual.

This document issued with Model No

Product Serial Number

& are trademarks of Teryair Equipment Pvt. Ltd.

IMPA Number

59 12 01

59 12 03

Electric Needle

Technical Data

Note 1: Standard equipment includes one set of 3mm Needles

, replacement needles sets available.

Note

2: Optional needles in 2mm with corresponding needle supporters can be ordered separately.

Operating and Safety Precautions

Following symbols are used throughout this manual.

Warning: If not followed could cause personal injuries

Caution: If not followed could result in damage to equipment.

Warning
This manual must be read and the operating instructions carefully followed.

Warning

Safety and protective clothing, eyewear, headgear, ear protection, gloves and footwear to be worn

during operation of this Electric Needle Scaler.

Warning.
Operators under 18 not allowed to operate this Electric Needle Scaler

. Operators must be made

familiar with the instructions in this manual before attempting to operate the

Electric

Ensure that job site is clear of bystanders.

Caution
Use only genuine Teryair or Teryair approved accessories.

Warning
This Electric Needle Scaler is not designed for use in an explosive

environment

ENS100V ENS200V

IMPA Number equivalent 59.12.01 59.12.03
Overall length, LxWxH mm

500mm x 250mm x 100mm

Needles 2mm

53 53

Needles 3mm

23 23

Needles 4mm

14 14

Electric Source

110V - 1ph 220V - 1ph

Weight, Kgs

7.0 7.0

FF-MM-319-Rev0

Page 1

Needle Scaler.

.

Caution
Completely turn off the Electric Needle Scaler and disconnect electric

supply line before attempting

any service. Read Assembly and Disassembly instructions.

Warning
Take must be taken to select correct power supply as per model.

Caution
Do not exert excessive pressure against the work surface. Keep wire cables

in good condition.

Check for any loose connection from the source.

Caution
Be aware that these Electric Needle Scalers can create dust & flying debris.
Keep hands & clothing away from moving parts.
Store these Electric Needle Scalers in secure & dry environment.
Do not allow the Electric Needle Scaler to run unattended.
Do not modify this Electric Needle Scaler in any way

as this will invalidate the warranty and could

lead to serious injury.
Do not allow the Electric Needle Scaler to run continuously whilst not in

contact

being prepared.
Do not hold the exposed needles whilst the Electric Needle Scaler is

in use this could cause

vibration damage to the hands.
Do not drag this Electric Needle Scaler by the cable.

Warning
Do not use the Electric Needle Scaler in potentially explosive environments.

Safety wear mandatory while

operating needle scalers

Eye and face and ear protection must be worn at all times

during operation of the

Scaler

. There is a chance of flying debris from the jobsite and the quality of wear should be such to

protect against such flying debris such as flakes of the removed layer.

Suitable gloves must be worn at all times during operation.

Safety Shoes with toe cap protection are a must during operation.

FF-MM-319-Rev0

Page 2

with the surface

Electric Needle