TERTEC Evolution LTE Antenna Installation Instructions Manual

®
TERTEC Evolution
Internet HI-Tech 2G/3G/4G LTE Antenna
Installation Instructions
TERTEC Evolution® GmbH - Neustadt 25 - 24939 Flensburg
support@tertec-evolution.eu
1
TERTEC
Evolution
®
Tel.: +49 (0)461 182 8149 E-mail: info@tertec-evolution.eu Web: www.tertec-evolution.eu
Start by drilling a hole of 20 mm, to avoid fraying. Drill through the half, rst from below and then from above.
Remove the protective lm from the underside of the antenna, before the antenna is put into the hole.
Through thickness Nut 0.1 mm - 250 mm Extension 250 mm - 600 mm
The nut or extension, tighten with 5 Nm.
The cable is pulled to the Internet Modem/Router Max 10 meters.
2
TERTEC
Evolution
®
Tel.: +49 (0)461 182 8149 E-mail: info@tertec-evolution.eu Web: www.tertec-evolution.eu
IMPORTANT!
For your Modem/Router to detect the Internet Hi-Tech Antenna, In the settings of the Modem/Router You need to select external or outer Antenna.
The Modem/Router is connected to the Antenna with SMA or adapter.
Frequency Range Low Band: 698 - 960 MHz High Band: 1710 - 2690 MHz Impedance 50 Ohm Polarization Vertical Gain 5dBi Max. Power 10W Connection SMA-connector Width 138 mm Height 55 mm Weight 200 g Material UV-resistant ABS Extension SMA 3 m Adapter SMA CRC9 & TS-9 Color White
Specifications Internet Hi-Tech antenna
Loading...