Terrco 6200 Operating Instructions Manual

®

Terrco

Model 6200

, Inc.

OPERATING INSTRUCTIONS

MAINTENANCE INSTRUCTIONS

ILLUSTRATED PARTS LIST

222 1st Avenue NW • Watertown, SD 57201

Phone: [phone] • Fax: [phone] • Email: [e-mail]

Terrco®, Inc.

Terrco® Model 6200

Specifications: Production Rates:

HP/KW 40/30

Voltage 460

Phase 3

Drive Variable

Amp Draw 46

Breaker (Amps) 60-80

Stone Holder RPM 400-760

Sweep of Discs 53-1/2” (1397 mm)

Abrasive Pressure 1885 lbs (855 kg)

Width of Machine 55” (1397 mm)

Length of Machine 80” (2032 mm)

Height of Machine 54” (1372 mm)

Net Weight 2300 lbs (1043 kg)

Shipping Weight 2565 lbs (1163 kg)

Power Cord (6-4) 100 ft (30,5 m)

 Mastic removal Rate of 1,000 sq. ft. per

hour

 Thin-Set removal rates of 1,000 sq. ft.

per hour

 Thin-Mil coatings removal of 800 sq. ft.

per hour

 Concrete polishing rates of 10,000 sq.

ft. per polishing pad

 Optimal for jobs exceeding 20,000 sq.

ft.

 Despite the weight and size the 6200 is

easily maneuverable

 Movable weights for easy one person

operation

 Variable Speed Drive
 Stainless Steel Guard with four vacuum

ports

 Dry Setup
 Handle Separates from Gear Case to

Allow Handle and Case to go through
Standard 36" Door

 Ten 42 lbs. Pocket Weights to Control

Grinding Pressure

Terrco®, Inc.

 222 1ST AVE. NW

 PHONE: [phone]  FAX: [phone]

 WATERTOWN, SD 57201

 EMAIL: [e-mail]

 WEBSITE: www.terrco.com

SAFTY PRECAUTIONS

-----------------------------------------------------------

This machine is intended for commercial use. It is designed ex­clusively to grind and polish Terrazzo and concrete floors. Use
only recommended accessories and abrasives.
When the machine is in need of repair, use only Terrco parts.
All operators must read, understand and practice the following
safety precautions.

WARNING: Rotating grinding wheels can cause injury, keep

hands and loose clothing clear.

WARNING: Disconnect power at the machine before servicing

or changing grinding stones.

WARNING: Always check ground (earth) connection prior to

operating machine.

For Safety:
1: Have electrician hook up power to machine.
2: Always operate machine with ground fault protection.
3: Eye, hearing and respiratory protection advised.
4: Service and adjust guards for maximum protection. Never remove the guards.
5: Keep machine clean and properly serviced.