Terrco 01-S Series Operating Instructions Manual
®
Terrco
01-S Series
, Inc.
OPERATING INSTRUCTIONS
MAINTENANCE INSTRUCTIONS
ILLUSTRATED PARTS LIST
222 1st Avenue NW • Watertown, SD 57201
Phone: (605) 882-3888 • Fax: (605) 882-0778 • Email: info@terrco.com
Terrco®, Inc.
Terrco® 01-S Series
HP/KW 7.5/5.6
SWEEP OF DISCS 27” (685,8 mm)
ABRASIVE PRESSURE 440 LBS (200 kg)
WIDTH OF MACHINE 27-1/4” (692 mm)
LENGTH OF MACHINE
HANDLE UP
LENGTH OF MACHINE
HANDLE DOWN
HEIGHT OF MACHINE 37-1/2” (952,5 mm)
NET WEIGHT 800 lbs (363 kg)
SHIPPING WEIGHT 860 lbs (390 kg)
WATER TANK 7 gallon (26,5 L)
POWER CORD (8-3) 100 ft (30,5 m)
* WEIGHT MEASURED WITH FOUR POCKET WEIGHTS
ELECTRICAL OPTIONS
29-1/4”
(743 mm)
56-1/2”
(1435 mm)
Optimal for jobs under 5,000 sq. ft.
Mild Steel or Stainless Steel Guards
Stainless Steel Water Tanks
Wet/Dry Setup
Direct Drive, No Belts
Leveling System
Adjustable Handle
Uses Plug Stone Shape, Bolt on to
Universal Tool Plate, or Speed Shift
System
PRODUCTION RATES
Mastic removal rate of 350 sq. ft. per hour
Thin-Set removal rates of 400 sq. ft. per
hour
Thin-Mil coatings removal of 200 sq. ft.
per hour
Concrete polishing rates of 450 sq. ft. per
polishing pad per hour (depending on grit)
Rough Terrazzo rate of 600 sq. ft. per day
VOLTAGE 230 230 230 230 460
PHASE 1 1 3 3 3
DRIVE MANUAL VARIABLE MANUAL VARIABLE VARIABLE
AMP DRAW 34 34 22 22 11
BREAKER (AMPS) 50 50 30 30 30
STONE HOLDER RPM 390 390-585 390 390-585 390-585
Terrco®, Inc.
222 1ST AVE. NW
PHONE: (605) 882-3888 FAX: (605) 882-0778
WATERTOWN, SD 57201
EMAIL: info@terrco.com
WEBSITE: www.terrco.com
1
--------------------------------SAFTY PRECAUTIONS
-----------------------------------------------------------
This machine is intended for commercial use. It is designed
exclusively to grind and polish Terrazzo and concrete floors.
Use only recommended accessories and abrasives.
When the machine is in need of repair, use only Terrco parts.
All operators must read, understand and practice the following
safety precautions.
WARNING: Rotating grinding wheels can cause injury, keep
hands and loose clothing clear.
WARNING: Disconnect power at the machine before servicing
or changing grinding stones.
WARNING: Always check ground (earth) connection prior to
operating machine.
For Safety:
1: Have electrician hook up power to machine.
2: Always operate machine with ground fault protection.
3: Eye, hearing and respiratory protection advised.
4: Service and adjust guards for maximum protection. Never remove the guards.
5: Keep machine clean and properly serviced.
Loading...