TerraWave VA09-48-055-AP09 User Manual

UPS Enclosure System

For Cisco 3500/3600 “E” Series Access Points

System Highlights

◊ Uninterruptible Power Supply (UPS) provides reliable power to

your network in the case of a power outage

◊ True plug-and-play system with heating capability for

outdoor deployments

◊ Robust aluminum back plate that allows for seamless

integration with Cisco’s 3500E and 3600E access points

◊ Ideal for mission critical applications

◊ 802.3af compliant

◊ Requires Cat5 cable only. PoE Injector allows system to run

smoothly

Cisco Access Point UPS Enclosure Systems

3502e
3602e

System Includes

Grey Polycarbonate Enclosure w/ Latch Locks

Predrilled Aluminum Back Plate—AP specific

RF Jumpers

RF Surge Protectors

PoE Power Surge Arrestor w/ Ethernet Cable

Ground System w/ Ground Stud, Bar & Wires

Omni MIMO Antenna

System w/ External

Patch Antenna

VA09-48-055-AP09 VA09-48-055-AP21

VA09-48-055-AP02 VA09-48-055-AP15

 
 
 
 
 
 

*External Patch Antenna sold separately.

Features

◊ Innovative heating and cooling system driven from PoE

power integrated into enclosure from the factory

◊ Integrated with one 4 pack (Cisco 3600e) or 6 pack (Cisco

System w/

Integrated Omni

Antenna



*Wires and cable not shown for clarity.

**AP sold separately.

Benefits

◊ Heating and cooling system engineered to allow safe

operability in extreme climates

◊ Single antenna design for MIMO applications eliminates

3500e) antenna including all internal patch cables

◊ RF surge arrestors are designed into the system with

ground bars and ground wires protecting the AP

◊ Plug-and-play system fully integrated from the factory

For project support contact a TerraWave Regional Sales Executive.

800.851.4965 | TerraWave.com/APsystems | [e-mail]

multiple antenna installation costs and time

◊ Protect the Cisco 3502e/3602e access point from the

outdoor environment

◊ Minimal installation time. Powered by PoE—no need to

run 120 VAC

Engineered for performance.

Simple Four-Step Installation

Step 1—Mount AP and AP bracket to pre-drilled aluminum back plate and attach included Ethernet cable to AP.

Step 2—Connect local AC power to terminal blocks.

Step 2—Hang enclosure on wall or pole (wall or pole mounts sold separately).

Step 4— Run site Ethernet cable through cable gland and attach to Ethernet surge arrestor (see label).

AP UPS Power System Enclosure Specifications

Dimensions (W x L x H) 18” x 16” x 10”

Enclosure Material Polycarbonate

Color Grey

NEMA Rating 4X

Environmental Temp Range -35 to 98° F

Lightning Arrestors

PoE Surge Suppression

Input Power

Temperature Compensated Battery Backup Time 9 Hours

RF Connections RPTNC

Weight 55 lbs

Warranty Manufacturer's warranty on components. 1 year on workmanship.

Range: DC 0-6 GHz

Impulse: 20 KA (Wave 8/20 µs)

Discharge Current: 10 KA

Peak Pulse: 100 A

(10/1000 µs)

115 VAC

Qty 4 — 7 Ahr Batteries

System w/ External Panel Antenna

Optional Accessories

 Clear/ Transparent door for enclosure

 CAT60 Key Lock for enclosure

 Wall mount kit —

 Pole mount kit —

 MIMO Patch Antenna w/ Articulating Mount

 High Gain, Point-to-Point Antenna

SKU 363287

SKU 303580

— SKU 572251

System w/ Integrated Omni Antenna

— SKU 349502

For project support contact a TerraWave Regional Sales Executive.

800.851.4965 | TerraWave.com/APsystems | [e-mail]