TerraWave T24140P1000690 User Manual

TerraWave Solutions® 2.4 GHz 14 dBi 90 Degree V-POL

Sector Panel Antenna with N-Style Jack Connector

TerraWave’s 2.4 GHz panel antenna provides 90-degree horizontal beamwidth which is perfect for a
variety of outdoor wireless applications. This vertically polarized sector antenna consists of a low
cost, high performance circuit design enclosed in a UV stabilized ABS plastic radome. Includes an
articulating mast mount, providing up to 30 deg of down-tilt.

Specifications

Model T24140P1000690
Frequency Range 2400 - 2483 MHz
Bandwidth 83 MHz

Gain 14 dBi
Vertical Beamwidth 15°
Horizontal Beamwidth 90°
VSWR -/=1.5
Front-to-back Ratio +/=25 dB
Nominal Impedance 50 Ohms
Polarization Vertical
Max Power 100 Watts
Connector N-Style Jack
Dimensions 23.5” x 6.5” x 3”
Weight 8.8 lbs
Rated Wind Velocity 135 mph
Operating Temperature Range -22°F to +158°F

E-Plane Pattern H-Plane Pattern

www.terrawave.com Email: [e-mail] Phone: [phone] Fax: [phone] 10521 Gulfdale, San Antonio, TX 78216

TerraWave Solutions® 2.4 GHz 14 dBi 90 Degree V-POL Sector Antenna

Mounting Bracket Information for T24140P1000690 and T24125P10006120

Installation Instructions:

1. Remove antenna from packaging and detach the mounting brackets from the antenna.

2. Attach the antenna and the lower bracket firmly to the mast.

3. Adjust the vertical angle of the antenna by changing the position of the upper bracket until signal
reception is optimized.

4. Fasten all screws and nuts provided in the package.

5. Seal the connector jointing parts with waterproof tape.

www.terrawave.com Email: [e-mail] Phone: [phone] Fax: [phone] 10521 Gulfdale, San Antonio, TX 78216