TerraWave T24125P10006120 User Manual
TerraWave Solutions® 2.4 GHz 12.5 dBi 120 Degree V-POL
Sector Panel Antenna with N-Style Jack Connector
TerraWave’s 2.4 GHz panel antenna provides 120-degree horizontal beamwidth which is perfect for
a variety of outdoor wireless applications. This vertically polarized sector antenna consists of a low
cost, high performance circuit design enclosed in a UV stabilized ABS plastic radome. Includes an
articulating mast mount, providing up to 30 deg of down-tilt.
Specifications
Model T24125P10006120
Frequency Range 2400 - 2483 MHz
Bandwidth 83 MHz
Gain 12.5 dBi
Vertical Beamwidth 15°
Horizontal Beamwidth 120°
VSWR -/=1.5
Front-to-back Ratio +/=25 dB
Nominal Impedance 50 Ohms
Polarization Vertical
Max Power 100 Watts
Connector N-Style Jack
Dimensions 23.5” x 6.5” x 3”
Weight 8.8 lbs
Rated Wind Velocity 135 mph
Operating Temperature Range -22°F to +158°F
E-Plane Pattern H-Plane Pattern
10521 Gulfdale San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: 210-375-8482 or 800-851-4965
TerraWave Solutions® 2.4 GHz 12.5 dBi 120 Degree V-POL Sector Antenna
Mounting Bracket Information for T24125P10006120 and T24140P1000690
Installation Instructions:
1. Remove antenna from packaging and detach the mounting brackets from the antenna.
2. Attach the antenna and the lower bracket firmly to the mast.
3. Adjust the vertical angle of the antenna by changing the position of the upper bracket until signal
reception is optimized.
4. Fasten all screws and nuts provided in the package.
5. Seal the connector jointing parts with waterproof tape.
10521 Gulfdale San Antonio, TX 78216 www.terrawave.com www.tessco.com/go/terrawave Phone: 210-375-8482 or 800-851-4965
Loading...