Terratek T14LCID User Manual
14.4V Cordless Impact Drill
T14LCID
User Manual – Please read and retain for future reference.
Contents
Parts List
Technical Information
Safety Instructions
Using your drill
Maintenance
Warranty
Parts List
No. Description No. Description
1 Battery 30 Impact out bushing
2 Switch 31 Rubber band
3 Reverse switch 32 Hammer head
4 Left housing 33 Rubber band
5 Power indicator 34 Bead ring
6 Transparent plate 35 Piston
7 Function knob 36 Gasket
8 Rubber band 37 Dowel pin
9 Function dowel 38 Snap spring 5
10 Snap spring 39 Bearing 695
11 LED light 40 Shaft
12 PCB guard shield 41 Shaft out bushing
13 Charge socket 42 Washer
14 Bearing HK2210 43 Shaft out bushing
15 Big gear snap ring 44 Spring
16 Big gear 45 Bearing
17 Steel ball (3) 46 Bearing HK0808
18 Steel ball (7.15) 47 Washer
19 Cylinder 48 Small gear
20 Sealing ring 49 Motor gear
21 Bearing (6804Z) 50 Screw M3
22 Snap spring 19 51 Motor
23 Lock spring 52 Weatherstrip
24 Locking collar 53 Bearing HK0608
25 Top cover 54 Weatherstrip
26 Rubber lock 55 Bearing HK0614
27 Rubber band 56 Right housing
28 Impact part 57 Screw ST 3*12
29 Impact inner bushing
Exploded Assembly Diagram
NOTICE: Actual product may vary from pictures shown.
Fig.1
Fig. 2
1) SDS-Plus tool holder
2) Dust protection cap
3) Locking sleeve
4) Selector switch for drilling/hammer drilling
5) Battery charge-control indicator
6) Indicator for right rotation
7) Indicator for left rotation
8) Rotational direction switch
9) On/Off switch
10) Keyless chuck with SDS-Plus*
11) Drill bit *
12) Screwdriver bit with SDS-Plus*
13) Drill bit with SDS-Plus *
14) Socket for charge plug
15) Charge connector
*The accessories illustrated or described are not included as standard delivery.
Fig.3
Fig.4
Fig.5
Technical Information
Voltage: 14.4V
Battery: Li-ion, 1300mAh
No load speed: 0 - 900/min
Impact Rate: 0 - 4300/min
Chuck: 0.8 - 10mm
Charger: 3 – 5 hours.
Drilling Capacity
Steel: 8mm
Wood: 16mm
Concrete: 10mm
Noise
Sound pressure level: LPA= 86dB(A) Uncertainty KPA=3dB
Sound power level: LWA= 97dB(A) Uncertainty KWA=3dB
Vibration: ah= 5.02m/s
2
Uncertainty K=1.5m/s
2
Charger
Input: 230-240V AC, 12.1W, 50Hz
Output: 18V DC, 400mA
Read this entire manual before using this
product. Failure to do so can result in serious injury.
Save this manual for future reference.
Copyright© 2012 by ACL Group (Intl) Ltd. All rights reserved. This manual or any artwork contained
herein must not be reproduced in any shape or form without the express written consent of ACL
Group (Intl) Ltd. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Loading...