Terratek T12VAG User Manual

12V Li-ion Cordless Angle Grinder

T12VAG

User Manual — Please read and retain for future reference.

IMPORTANT: Read all instructions before use.

Contents

Parts List

Parts List

Safety Instructions

Technical Information

Using your tool

Maintenance

Warranty

1

No. Description No. Description

1

upper flange

26

link

2

100mm disc

27

Micro switch

3

lower flange

28

rubber strip

4

grinding guard

29

screw st3x25

5

output spindle

30

screw st3.20

6

woodruff key ø10x2.5

31

right housing

7

screw m4x10

32

screw st2.2x10

8

spring washerø4

33

12v li-ion battery pack

9

front cover

34

connector holder

10

608 bearing

35

Armature

11

retainer plate

36

screw m3x6

12

screw m4x8

37

armature support

13

big gear

38

flange b

14

wave washer 08

39

rubber flange

15

circlip for shaft 8

40

flange a

16

needle bearing

41

shaft

17

ring ø0.8xø5

42

bearing cover a

18

reducer case

43

small gear

19

screw st3x14

44

sliding bearing ø5xø7x5

20

screw st3x20

45

fast-load lever parts

21

spring

46

mag-sleeve

22

brake pin

47

left housing

23

Trigger

48

12v fast charger

24

Blocker

49

spanner

25

Spring

2

Exploded Assembly Diagram

NOTICE: Actual product may vary from pictures shown.

3

2

4

3

1

7

5

Fig.1

Fig.2

1. Wheel Guard

2. Quick Release Lever

3. Grinding Wheel

4. Spindle Lock

5. Switch Button

6. Battery Pack

7. Charger

Tabs

Charge indicator

Battery capacity indicator LED

6

4

Wheel Guard

Spindle

Fig.3

Fig.4

Spindle Lock

Wheel Guard

Inner Flange

Grinding Wheel

Outer Flange

5

Technical Information

Model: T12VAG
Rated Voltage: 12V DC
No-load Speed: 7000 /min
Max. Disc diameter: 100 mm
Mounting Spindle threads: M10
Battery Type: 1300 mAh Li-ion

Charger
Charging time: 1 hour
Input: 100-240V AC, 50 – 60 Hz, 27W
Output: 12.6V DC, 1500mA Max

Read this entire manual before using this product.
Failure to do so can result in serious injury. Save this manual
for future reference.

Copyright© 2013 by ACL Group (Intl) Ltd. All rights reserved. This manual or any artwork
contained herein must not be reproduced in any shape or form without the express written
consent of ACL Group (Intl) Ltd. Diagrams within this manual may not be drawn
proportionally. Due to continuing improvements, actual product may differ slightly from the
product described herein.

6

Read and Keep This Manual

Please read carefully all instructions within this manual. Failure to follow all safety warnings
can result in serious personal injury. The term “Power Tool” in all of the following warnings
refers to your mains operated (corded) or battery operated (cordless) power tool.

This symbol is to warn you of potential personal injury
hazards. Please read carefully the notes along side this warning
to avoid possible injury or death.

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.

Important SAFETY Information

General Safety Rules

Work area safety

WARNING! Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
The term “power tool” in all of the warnings listed refers to corded or
cordless power tools.