We, TerraTec Electronic GmbH, Herrenpfad 38, 41334 Nettetal, Germany declare in our
own responsibility, that the product
TerraTec TerraCam X2
corresponds with the following norms and normative documents:
• EN 55022:1998 + A1:2000+A2:2003
• EN55024:1998+A1:2001+A2:2003
• EN61000-4-2:1995
• EN61000-4-3: 1997
According to this document, the utilization of the CE label is confirmed. Guideline
89/336/EWG.
Heiko Meertz
The information in this document is subject to change without notice and shall not be deemed
as a warranty by the seller. No warranties, express or implied, are made with regard to the
quality, suitability or accuracy of this document. The manufacturer reserves the right to change
the contents of this document and/or the associated products at any time without the provision of prior notice to specific persons or organizations. The manufacturer shall not be held
liable for damages of any kind arising from the use, or the inability to use this product or its
documentation, even if the possibility of such damage is known. The information in this document is subject to copyright. All rights are reserved. No part of this manual may be reproduced or transmitted in any form or for any purpose without the express written permission of
the copyright holders. Product and brand names contained in this document are used for identification purposes only. All registered trademarks, product designations or brand names
used in this document are the registered property of their respective owners.
Service at TerraTec................................................................................................................. 14
TerraCam X2 (English) 3
A new dimension of interactive cooperation
Thank you for choosing the TerraTec TerraCam X2. The TerraCam X2 is the culmination of current webcam development and combines state-of-the-art technology with maximum convenience. In this manual, we would like to give you a bit additional information on the topic of
webcams. But first, a foretaste of what you can expect.
The TerraCam X2 has a stylish housing and outstanding technology that sets new standards.
Installing drivers is now a thing of the past: simply plug it into a free USB 2.0 port and open
your favorite messenger application. Its genuine 1.3 megapixels, resolutions of up to 1280 x
1024 (video and still) and its integrated microphone make chat sessions a special experience.
The camera is also suitable for room surveillance.
Tip: Visit http://www.terratec.de from time to time for regular software updates, tutorials and
other information that can make working with your TerraTec product easier. If you run into
problems, checking the FAQ or updating to the latest driver and software versions will usually
get you back on track.
We hope you enjoy your new TerraCam X2.
...your TerraTec Team
4 TerraCam X2 (English)
Specifications
• 1.3-megapixel CMOS sensor with genuine 1280 x 1024 resolution
• Ultra-low power technology
• State-of-the-art camera technology for webcam operation without drivers
• Focal range: 5cm to infinity
• Integrated microphone
o Sensitivity: -43 dB
o Impedance: 2.2 kOHM
o Frequency Response: 50 - 15000
• Temperature range: 0°C to 50°C
• Lens: ¼“
• Supported resolutions:
160 x 120 @ 30 fps 176 x 144 @ 30 fps 320 x 240 @ 30 fps
352 x 288 @ 30 fps 640 x 480 @ 30 fps 1280 x 1024 @ 15 fps