Terratec HEADSET MASTER5.1 USB User Manual

EN

1

2

3

1

2

Please check the scope of delivery first:

1.Master 5.1 USB headset

2.Removable microphone

+ Software CD, Protective bag,
Service request form and registration documents

Boot your PC and wait until Windows has loaded
completely. Plug the Headset Master 5.1 USB into a free
USB port. The blue LED on the controller will light up.

As soon as the headset is connected, Windows will
display a message bubble in the taskbar to indicate that
it has found new hardware. The required system drivers
will now be installed. If the installation was successful, a
bubble will appear with the message "Your hardware
was installed successfully and is ready to use".

4

5

6

Insert the CD in your CD/DVD drive and wait for it to start
automatically. Choose your language. Under the Software
menu item, install the Control Panel. Follow the onscreen
instructions and complete the installation by clicking
"Finish" and restarting your system if prompted to do so.

After rebooting your system, a headset icon will appear in
the system tray. Double-click the icon to open the Control
Panel, in which you can configure all of the important
settings of the headset.

Contact TerraTec International:
http://supporten.terratec.net

Contact TerraTec UK:
0208-6027029
Monday-Friday 12am-7pm
www.terratec.com

quick setup guide