Bitte kontrollieren Sie zunächst den Lieferumfang:
1 TerraTec Grabster AV400
2 A/V-Cinchkabel
3 S-Video-Kabel
4 USB-Kabel
5 Adapter Scart-Composite/S-Video/Stereo Audio
2
Treiber CD inkl. Handbuch
+ Servicebegleitschein & Registrierungsunterlagen
Schalten Sie Ihren PC an und warten Sie bis Windows XP
SP2 vollständig geladen ist. Legen Sie bitte die
beiliegende Installations DVD in Ihr DVD-Laufwerk.
Ignorieren Sie bitte zunächst den Autostarter. Den
brauchen wir später. Stecken Sie bitte den Grabster in
einen freien USB Anschluss Ihres PCs.
Sobald Sie den Grabster mit dem PC verbunden haben,
meldet Windows in Form einer Sprechblase in der
Symbolleiste, dass eine neue Hardware - der Grabster
AV400 - gefunden wurde. Es startet der Windows
Installations-Assistent. Wählen Sie “Nein, diesmal nicht”
und dann “Software automatisch installieren
(empfohlen)”, und “Weiter”
4
5
6
Kontakt TerraTec Deutschland:
www
.terratec.de
Jetzt wird der Treiber installiert. Windows meldet, dass
die Treiber den Windows-Logo-Test nicht bestanden
haben. Diesen Hinweis können Sie ruhigen Gewissens
ignorieren und mit einem Klick auf “Installation fortsetzen”
fortfahren. Nachdem die Treiberdateien kopiert wurden,
schließen Sie die Installation mit “Fertigstellen” ab.
Wechseln Sie nun auf die CD, wählen Sie Ihre Sprache,
dann Software und fahren Sie mit der Installation von
MAGIX Filme auf CD & DVD TerraTec Edition fort. Folgen
Sie einfach den Anweisungen auf dem Screen.
Starten Sie nun MAGIX Filme auf CD & DVD TerraTec
Edition durch einen Doppelklick auf das dazugehörige
Desktop-Symbol.
Ein ausführliches Online-Handbuch zu der Software
erhalten Sie, wenn Sie bei geöffnetem Programm F1
drücken.
Please check the scope of delivery first:
1 TerraTec Grabster AV400
2 A/V cinch cable
3 S-video cable
4 USB cable
5 Scart-composite/S-video/stereo audio adapter
2
Driver CD incl. manual
+ Service request form and registration documents
Boot your PC and wait until Windows XP SP2 has loaded
completely. Please insert the supplied installation DVD in
your DVD drive. Ignore the autostart program for the
time being. It will be needed later. Please insert the
Grabster in a free USB port of your PC.
Once you have connected the Grabster with your PC, a
message bubble over the system tray will tell you that
Windows has found new hardware Grabster AV400.
The Windows setup wizard will now appear. Select
“Install later” and then “Install software automatically
(recommended)” and “Continue”.
4
5
6
The driver is now being installed. Windows reports that
the drivers have not yet passed the Windows logo test. It
is safe to ignore this information and continue the
installation by clicking "Continue anyway". Click "Finish" to
complete the installation once the driver files have been
copied. Change to the CD, select your language, then
"Software installation" and continue the installation of
MAGIX Movies on CD & DVD TerraTec Edition Simply
follow the instructions of the setup wizard.
Start MAGIX Movies on CD & DVD TerraTec Edition by
double-clicking the corresponding desktop symbol.
A detailed online manual about the software can be
found by pressing F1.
Pour commencer, vérifiez si le coffret est complet :
1 TerraTec Grabster AV400
2 A/V câble cinch
3 Cable S-vidéo
4 Câble USB
5 Adaptateur Scart-Composite/S-vidéo/Stéréo audio
2
CD-ROM contenant les pilotes et le manuel
+ le bordereau d'accompagnement et les
documents d'enregistrement
Allumez votre PC et attendez que Windows XP SP2 soit
entièrement chargé. Insérez le DVD d'installation dans
votre lecteur de DVD. Pour commencer, ignorez la
fenêtre de démarrage automatique. Nous en aurons
besoin plus tard. Insérez le Grabster dans un
emplacement USB libre de votre PC.
Si vous avez raccordé le Grabster à votre ordinateur,
Windows vous annonce par une infobulle dans la barre
d'outils qu'il a détecté un nouveau matériel Grabster
AV400. L'assistant d'installation Windows démarre.
Sélectionnez « Non, pas maintenant » puis « Installer le
logiciel automatiquement (recommandé) » et cliquez sur
Suivant.
4
5
6
L'installation du pilote est exécutée. Windows indique
que les pilotes n'ont pas passé le test du logo Windows.
Vous pouvez ignorer cette remarque et continuer en
cliquant sur « Poursuivre l'installation ». Une fois que les
fichiers des pilotes ont été copiés, terminez l'installation
en cliquant sur « Terminer ». Passez ensuite au CD,
sélectionnez votre langue, puis "Installation de logiciel" et
continuez avec l'installation de MAGIX Films sur CD &
DVD TerraTec Edition. Suivez les instructions de
l'assistant d'installation.
Exécutez MAGIX Films sur CD & DVD TerraTec Edition en
double-cliquant sur l'icône correspondante se trouvant
sur le bureau.
Vous trouverez un manuel en ligne détaillé pour le logiciel
en cliquant F1.
Controllate prima il contenuto della confezione:
1 TerraTec Grabster AV400
2 Cavo cinch A/V
3 Cavo S-video
4 Cavo USB
5 Adattatore scart-composite/S-Video/audio stereo
2
CD dei driver incl. manuale
+ cartolina di servizio, documentazione di registrazione
Accendete il PC ed attendere finché il Windows XP SP2
non sia completamente in condizioni di operatività.
Inserite il DVD di installazione accluso nel lettore di DVD.
Ignorare prima l'autoplay. Ci servirà in seguito. Innestate il
Grabster in una presa USB libera del PC.
Non appena si è collegato il Grabster al PC, Windows
segnala sotto forma di una nuvoletta nella barra degli
strumenti che è stato rilevato del nuovo hardware, il
Grabster AV400 appunto. Si avvia l'installazione guidata
di Windows. Scegliete “No, non questa volta” e poi
“Installa il software automaticamente (scelta consigliata)”,
e “Avanti”.
4
5
6
Adesso viene installato il driver. Windows segnala che i
driver non hanno superato il test del logo Windows.
Potete ignorare tranquillamente questa avvertenza e
proseguire con un clic su "Continuare l'installazione".
Dopo che i file del driver sono stati copiati, concludete
l'istallazione con "Fine". Passate adesso al CD, scegliete
la vostra lingua e poi “Installazione del software" e
proseguite con l'installazione di MAGIX Film su CD & DVD
TerraTec Edition. Seguite semplicemente le istruzioni
dell'installazione guidata.
Avviate ora MAGIX Film su CD & DVD TerraTec Edition
attraverso un doppio clic sul simbolo corrispondente sul
desktop.
Un manuale in linea dettagliato sul software si trova
attraverso un clic sul F1.
A continuación, compruebe el volumen de suministro:
1 TerraTec Grabster AV400
2 Cable Cinch A/V
3 Cable S-video
4 Cable USB
5 Adaptador Scart - Composite/S-video/audio estéreo
2
CD de controladores incl. manual
Documento de seguimiento postventa &
documentación de registro
Conecte su ordenador y espere hasta que Windows XP
SP2 se haya cargado por completo. Introduzca el DVD
de instalación suministrado en la unidad de DVD. Ignore
el arranque automático. Lo utilizará más tarde. Conecte
el Grabster en un puerto USB disponible de su PC.
En cuanto conecte el Grabster al PC, Windows le
informará mediante un globo de diálogo que aparecerá
en la lista de símbolos de que se ha encontrado un
nuevo componente de hardware: Grabster AV400. Se
ejecutará el asistente de Windows para la instalación.
Seleccione "Ahora no" y después "Instalar el software
automáticamente (recomendado)" y "Siguiente".
4
5
6
Se instalará el controlador. Windows informa de que los
controladores no han superado el test de compatibilidad
para Windows. Ignore este mensaje y prosiga la
instalación haciendo clic en "Continuar con la
instalación". Una vez que los datos del controlador se
hayan copiado, finalice la instalación con "Finalizar".
Cambie al CD, seleccione su idioma, después
"Instalación del software" y prosiga con la instalación de
MAGIX Filmes em CD & DVD TerraTec Edition. Siga las
indicaciones del asistente para la instalación.
Inicie el software MAGIX Filmes em CD & DVD TerraTec
Edition haciendo doble clic en el símbolo
correspondiente del escritorio.
Para obtener un manual online detallado del software
pressione la tecla F1 cuando tenga el programa abierto.
Contacto TerraTec Alemania:
www.terratec.de
Servicio de Atención al Cliente
02157-817914
Lunes a viernes 13:00 - 20:00 h
http:\\supportde.terratec.net
quick setup guide
Page 6
NL
1
2
3
1
4
3
5
Gelieve eerst de leveromvang te controleren:
1 TerraTec Grabster AV400
2 A/V-cinchkabel
3 S-videokabel
4 USB-kabel
5 Adapter Scart-Composite/S-Video/Stereo Audio
2
Driver cd incl. handleiding
+ Servicegeleideformulier & registratiedocumenten
Schakel uw pc in en wacht tot Windows XP SP2 volledig
geladen is. Plaats de bijgeleverde installatie-dvd in uw
dvd-station. Negeer eerst de autostarter. Die hebben we
later nodig. Gelieve de Grabster in een vrije USBaansluiting van uw pc te steken.
Zodra u de Grabster met de pc verbonden hebt, meldt
Windows in de vorm van een tekstballon in de werkbalk
dat er nieuwe hardware - de Grabster AV400 gevonden werd. De Windows-installatie-assistent start.
Kies "Nee, nu niet" en dan "Software automatisch
installeren (aanbevolen)" en "Volgende".
4
5
6
Nu wordt de driver geïnstalleerd. Windows meldt dat de
drivers de Windows-logotest niet doorstaan hebben.
Deze melding kunt u met een gerust geweten negeren
en met een klik op "Installatie voortzetten" kunt u de
installatie voortzetten. Nadat de driverbestanden
gekopieerd werden, sluit u de installatie met "Voltooien"
af. Ga nu naar de cd, kies uw taal, dan "Software
installatie" en zet de installatie van MAGIX Film op CD &
DVD TerraTec Edition voort. Volg gewoon de instructies
van de installatie-assistent.
Start nu de MAGIX Film op CD & DVD TerraTec Edition
software met een dubbelklik op het bijbehorende
desktopsymbool.
Een uitgebreide online gebruiksaanwijzing van de
software vindt u onder de knop F1 op uw toetsenbord
wanneer het programma geopend is.