to which this declaration refers is in compliance with the following standards or standardizing
documents:
1. EN 55022
2. EN 50082-1
The following are the stipulated operating and environmental conditions for said compliance:
residential, business and commercial environments and small-company environments.
This declaration is based on:
Test report(s) of the EMC testing laboratory
The information in this document is subject to change without notice and shall not be deemed as a warranty by the
seller. No warranties, express or implied, are made with regard to the quality, suitability or accuracy of this document. The manufacturer reserves the right to change the contents of this document and/or the associated products
at any time without the provision of prior notice to specific persons or organizations. The manufacturer shall not be
held liable for damages of any kind arising from the use, or the inability to use this product or its documentation,
even if the possibility of such damage is known. The information in this document is subject to copyright. All rights
are reserved. No part of this manual may be reproduced or transmitted in any form or for any purpose without the
express written permission of the copyright holders. Product and brand names contained in this document are
used for identification purposes only. All registered trademarks, product designations or brand names used in this
document are the registered property of their respective owners.
Support ..............................................................................................................................25
SoundSystem Aureon 5.1 PCI (English) 3
Dear Customer,
In the following Quick Reference Guide, replace “<CD>” with the drive letter assigned to your
CD-ROM drive.
Layout of the card
Listed from top to bottom:
1. Microphone In
2. Line In
3. Line Out 1 (Front) / Headphone Out
3. Line Out 2 (Rear)
3. Line Out 3 (Center / Sub)
4. Digital In
5. Digital Out
4 SoundSystem Aureon 5.1 PCI (English)
Hardware installation
Installing the card
Before installing the sound card in your computer, please note the details of your computer's
configuration. Also refer to the manual of your computer and other expansion cards for their
settings.
Please observe the following instructions to ensure a trouble-free installation.
If you are still having problems, please call our service hotline. The telephone number and
operating hours of the hotline are on the included customer service card.
• 1 registration card with the product serial number
• 1 customer service card.
Please fill out and return the registration card to us at your earliest convenience or register
online at http://www.terratec.net/register.htm
services.
Safety note.
Before opening the case, unplug the AC power cable from the wall socket as well as from the
PC.
. This is important for support and hotline
SoundSystem Aureon 5.1 PCI (English) 5
And here’s what to do, step by step:
• Switch off your PC and all connected peripheral devices such as your printer and monitor.
Leave the AC power cable connected for the time being, so that your computer is still
grounded.
• Touch the metal chassis at the rear of the PC to ground and to discharge static. Now un-
plug the cord from the AC socket.
• Remove the cover from the case of your PC.
• Look for a free PCI expansion slot. (To ensure the optimal function of your Aureon 5.1 PCI,
look for an expansion slot that is not immediately next to an already-installed card. Some
cards, such as graphics cards, can send out signals that can interfere with the sound
card.) Unscrew the screw that fastens the slot blanking plate and remove the plate.
• Carefully remove the sound card from its packaging and pick it up by the edges with one
hand while your other hand is touching a metal part of the PC. This will ensure that your
body is completely discharged of static electricity via your computer without charging the
sound card. Do not touch the components of the card under any circumstances.
• Determine the function of port :
• Align the holder at the rear of the sound card in the expansion slot in such a way that the
card’s gold connectors are directly in line with the slot’s socket.
• Insert the card into the slot. You might have to press the card firmly into the slot to make
good contact. Take care to ensure that the contacts are exactly in line. If they are not, you
could do damage to the sound card or your computer's motherboard.
• Insert and tighten the screw from the slot blanking plate to secure the sound card in its
slot.
• Reinstall the cover of your PC case.
• Connect your speakers or stereo system to the sound card.
• Reconnect the AC power cable as well as all other cables. Make sure that your speakers or
HiFi system is set to low volume. Start your computer.
6 SoundSystem Aureon 5.1 PCI (English)
Connecting a speaker system to your Aureon 5.1 PCI sound card
You can connect any commercially available active speaker system to your Aureon 5.1 PCI
sound card.
Ensure that the front port is configured as “Line” using JP1.
Below is an illustration of the typical connection for a 6-channel (5.1) speaker system (the
required 2x cinch [RCA] to 3.5 mm jack connecting cables are normally included with your
speaker system, such as TerraTec HomeArena products).
To connect a 4-channel speaker system, use only the front and rear ports. For a 2 or 2.1channel speaker system, use only the front port of the sound card.
After installing the drivers and software, select the correct speaker configuration in the Aureon
5.1 PCI Control Panel (see the chapter on “The Aureon 5.1 PCI Control Panel”).
SoundSystem Aureon 5.1 PCI (English) 7
Installing the drivers on current operating systems
The current drivers are intended for the following operating systems:
- Windows XP 32
- Windows XP 64
- Windows Vista 32
- Windows Vista 64
Installing the drivers and Control Panel (XP / Vista)
After the computer has been restarted, you're logged in as administrator and Windows XP /
Vista detects the new hardware using the Add New Hardware Wizard, the following window
displays.
Windows XP Windows Vista
Insert the Aureon 5.1 PCI Software CD into your CD/DVD drive. If the installation wizard does
not start automatically, run <CD>:\Autorun.exe manually.
In the installation wizard, first select your desired menu language and then click “Software
Installation”. Start the setup by clicking “AUREON 5.1 PCI”.
Alternatively, you can also start “Setup.exe” manually from the folder
<CD>:\Software\TerraTec. Simply follow the instructions on the screen.
In the following dialog box, Windows Vista will inform you that the “Aureon 5.1 PCI” driver did
not pass the “Windows Logo test”. Click “Continue Anyway” and then “Finish” to complete the
installation.
8 SoundSystem Aureon 5.1 PCI (English)
Loading...
+ 17 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.