TerraNation Roa Kohu Assembly Instructions Manual

Assembly
instructions

1

2

2

Two (2) persons are recommended

1. Remove rocks, branches and other sharp
objects from the area you will lay on. Unfold the
shader with floor flat on the ground.

2. Assemble the n.1 black pole.

3. Find the edge of the n.1 black tunnel and slide
the pole inside.

4. Assemble the n.2 grey pole.

5. Find the edge of the n.2 grey tunnel and
slide the pole inside.

6. Insert n.1 and n.2 metallic pins, located in the
le side of the shader base, into the correspondent
poles edges. Repeat the same step for the right
side.

7. Wrap around the poles, the webbing located
on shader’s side meshes and secure it by
joining the two parts of the plastic buckle. For a
tighter fit adjust the webbing length.

8. Secure the shader to the beach ground by
inserting the included pegs in the perimetrical
appropriate housings located at the base of the
product and to the top cords located in the
triangular pockets.

9. For extra stability fill with sand or pebbles the
le and right base pockets.

Disassembly
instructions

1

2

2

o (2) persons are recommended

1. Remove all pegs and release the poles from
the metallic pin on both sides.

2. Push n.1 black pole out of its tunnel.

3. Push n.2 grey pole out of its tunnel.

4. Fold the poles and place them in their case.

5. Fold the shader fabric to the center, till it
ends up same in width as the side pockets.

6. Place the pole and peg bags into one of the two
side pockets.

7. Using the pole bag as guide wrap the fabric
tightly from one pocket to the other and place
the shader in the carry bag.

Maintenance and storage instructions:

-Only water should be used when cleaning the
fabrics.

-The stains should be treated locally and
separately.

-The beach shader must be dry and clean before
storing.

-Poles and pegs should be stored in their cases.

-Select a dry and shady place to store the beach
shade.

wT