Teron Lighting NIKE S - LED Installation & Maintenance Instructions Manual
1
WARNING: DISCONNECT POWER PRIOR TO INSTALLATION OR SERVICING OF FIXTURE
NOTE: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE
WITH THE APPLICABLE LOCAL & NATIONAL ELECTRICAL CODES
BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND FAMILIAR
WITH THE OPERATION OF THE PRODUCT AND HAZARDS INVOLVED.
INSTALLATION
1. Remove any excess packing from the fixture.
2. Line up the back of the housing in desired location, completely covering junction box and mount securely to
the junction box with (2) 8-32 screws OR with nipple mount. For nipple mount, attach crossbar(A) to the jbox with screws (By Others) and screw the nipple into the crossbar(A). Then place center hole of
housing(B) over the nipple and install the nut provided.
3. Connect the fixture leads to the supply line leads. TLI stipulates the BLACK lead as line voltage, WHITE
lead as common and BARE/GREEN lead as ground.
4. Restore the power to the circuit.
MAINTENANCE: DO NOT use cleansers containing bleach.
The metal portion of the fixture can be wiped clean as needed using a mild soap solution.
Avoid moving any exposed wires. If any wires are accidentally disconnected, call a professional
to repair.
INSTALLATION & MAINTENANCE INSTRUCTIONS
FOR THE
NIKE S - LED
Wall Mounted Luminaire P.N.:76157
2
Loading...