Bucketload™ Pannier
Specifications
• 24 L (1465 cubic in) carrying capacity
• 9 kg (20 lb) maximum load
Attach and Fasten the Pannier
Mount the Pannier far back enough so as not to interfere with Rear Axle.
How to Secure Heavier Loads
Load Pannier and insert hook into loop Tighten Inner Straps
ternbicycles.com
1 1
Check Clearance from the Ground to the Bottom of the Bag
With a loaded Pannier, tilt your bike from side to side and determine how far it can be leaned
over before the bottom of the Pannier touches the ground. Be cautious and do not exceed this
angle when making turns. Tightening the Inner Straps can increase ground clearance.
How to Use the Pannier with Cover Open
Roll the cover and tuck behind the Pannier.
Do not leave any straps loose or dangling. Secure all straps before riding.
Fold Flat When Not in Use
LIMITED PRODUCT WARRANTY INFORMATION: This Product comes with a ONE (1) YEAR Limited Warranty from the date of retail purchase by the
original end-user. If a material or workmanship defect arises and a valid claim is received within the Warranty Period, this Product will be replaced.
Mobility Holdings cannot be held liable for damages to personal property due to misuse or improper care and maintenance. This Product Warranty
does not, under any circumstance, cover the replacement or cost of any third party product used with or connected to the Product.
Tern, the Tern Werd (logotype), and the Tern Berd (device) and Bucketload Pannier, used alone or in combination are trade names, trade devices or
registered trademarks of Mobility Holdings, Ltd.
© 2018 Mobility Holdings, Ltd.
ternbicycles.com
Loading...