Termikel 17076 User Instructions

USER INSTRUCTIONS
CERAMIC HOB
Please read these instructions carefully before attempting to install or use this
17076
-2--2-
Intro d u ctio n
Thank you for choosin g this So vereign applianc e. It has been
designed to give years of trouble-free use provided it is installed
and m aintained correctly.
Please read these instructions carefully before installing or using your appliance. It is advisable to keep your purchase and installatio n receipts with these instructions in a safe place fo r future reference. Included is som e im portant safe ty inform ation in addition to guidelines and recom mendations that will enable you to
take full advantage of all the function s available.
This quality appliance has been tested and certified to m eet all
applicable UK e lec trical an d safety standards.
This applianc e must be insta lled and connected in accordance
with current regulations by a qualified electrician.
After unpa cking the appliance ensure that there is no visible
dam age. If the appliance has been dam aged during transit, do
not use it, contact your retailer imm ediately.
Termikel appliance. It has been
Termikel appliance. It has been
Termikel appliance. It has been
Termikel appliance. It has been
Termikel appliance. It has been
Termikel appliance. It has been
Termikel appliance. It has been
Termikel appliance. It has been
Termikel appliance. It has been
electrical and safety standarts.
-3--3-
G u aran tee
This applianc e is guaranteed for one year from date of purchase.
Keep your purchase receipt with the se instructions.
To fulfill th e conditions of the guarantee this appliance m ust have
been correctly installed by a qualified person and operate d in
accordance with these instructions. The appliance is intended for
dom estic use only.
If the appliance fails to work properly during the firs t year period
contact the S overeign Service H elp line on 01527 -573010.
The appliance will be repaire d or replaced (at the manu facturer’s
discretion) at no cost to you. If the guarantee has elapsed, you will
be given a quotation for any repairs or parts required.
The m ode l an d s eria l num ber together with details of your sales
receipt m ust be quoted when contacting the He lp line.
For Assistance or Service please contact the Sovereign Service Help line on 01527-573010
Termikel Service Help line.
Description Of The Appliance
-4--4-
CON TENTS:
Sectio n 1 . Ins talla tio n
Section 2. S afety A dv ic e
Section 3. O pe rating the A pp lian ce
Section 4. M ainte nance
-5--5-
Section 1. Installation
1.1. Appliance Dimensions
The following dimensions are supplied for guidance purposes only. You should accurately measure your appliance and cabinetry before commencing installation.
Your hob is supplied with a fixing kit and seal to ensure that the hob is securely fitted/sealed to the work surface.
-6--6-
SECTION 2 The Safety Instructions-
This electric cooker had been manufactured for cooking ordinary home food. Please do not use the product for any other purposes. Please read all of the instructions before using the product. This device should be installed by authorised and expert persons in accordance with the instructions of the manufacturer and also in accordance with the relevant safety standards. Before the first use, remove all of the packaging and protective films over the device. The electrical conditions that are required to be provided for the product are written on the capacity label. This device should be installed in accordance with the provisions and instructions that have been provided and should only be used in very well ventilated places. Please read this instructions manual before the installation and use of the product.
-Please do not try to make any alterations on the device of any sort.
-The operation voltage of your cooker is 230 Volts - 50 Hz.
-This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-Children should be supervised to ensure that they do not play with the appliance.
Warning
: This device is required to be earthed. Please check that all of
the control buttons are in the OFF (closed) position after the completion of cooking.
- Your cooker must be used with an earthed outlet, since the inlet of your oven is
an earthed inlet. Control if the electric supply is earthed or not. If it was not earthed, get it earthed by an electric technician. Our firm will not take any responsibility in case that it is used without grounding.
- For Mono-phase: The fuse current value in your electric installation should be
at least
16 A. A supply cord of 3 x 1,
5 mm2 is supplied with your oven.
- The connections should only be made by the authorised technical service of
TERMİKEL or the authorised persons by the customer relations department.
The Safety of Children :
- This device had been designed to be operated by adults. Do not allow the
children near the device and do not allow the children to play with the device.
- While in use, the device is going to heat up. The children should not be allowed near the device until it cools down.
- The children may cause injuries to themselves while removing utensils or dishes from the device.
Warning : Accessible parts may become hot during use. Young children should be kept away.
Attention : The hazard of burn injuries is extremely high for small children unaware of the threat. The surfaces of the cooker are hot when in use. These may cause burn injuries. For such reasons, the small children are required to be kept away from the cooker. Attention : Hazard of Burn injuries : The heating units are extremely hot when in use. For this reason, always use kitchen protective aprons and gloves for protection against heat while holding the utensils and in order to avoid burn injuries, take care while using the dishes and the utensils.
Warning : If the surface is cracked, switch off the appliance to avoid
the possibility of electric shock, for hob surfaces of glass-ceramic or similar material which protect live parts
When in use :
- Before using the device for the first time, wipe away the protective materials, wipe the racks and the trays of the oven in hot soapy water and wash the accessories; and wipe away the protective grease layer, if any.
- Do not use the device in case it is in contact with water. Do not attempt to use the device with wet hands.
- Please make sure that the buttons are in the OFF (closed) position when not in use.
- Do not keep the easily flammable materials such as gloves, dust cloths, etc ... on the cooker surface.
- Do not use the heaters of the device for the purposes of heating the room; do not keep empty utensils on the heaters that are in ON position.
The outer surfaces of the cooker could be heated up during the routine use of the device.
- Keep the electric cord of your cooker away from the hot zones and do
not allow the cords to be in contact with the cooker. Keep the cords away from sharp edges and hot surfaces.
- Use heat protective gloves while holding the utensils placed on the cooker.
- When boiling or frying things, the very hot drops of margarine or oil that have spilt on the surface of the oven, may be easily flammable and could cause fire hazards. Please keep frying under your control.
- The unbalanced or deformed utensils and dishes could cause injuries due to sliding, spilling or their inefficient use, could cause accident, so such utensils should not be used in the heater surfaces.
- Food that goes bad easily, plastic materials and aerosols could be effected from heat. For this reason, such materials should not be kept on or around the device.
- the appliance is not intended to be operated by means of external timer or separated remote-control system
The Servicing :
- In case the connection cables of the devices that are kept around this device get in contact with the hot zones of the cooker, their cables may get damaged and a short circuit may occur. For this reason, the cables of the other devices should be kept at a certain safety distance from the oven. When the current cable is damaged, please apply to the closest authorised technical service and ask for the cable to be replaced with a new one.
- The procedures that have been undertaken on the device and the repair work that had been made that are not in compliance with the technical protocols, could cause electric shocks and short circuits. Please refrain from such procedures that could damage your device and that could cause such personal injuries.
- The repair and the maintenance of this device should only be undertaken by the engineer of the authorised technical service; and the parts that are used should be original and certified spare parts.
- When the supply cable of the device is damaged, replace it with the
same cable to be supplied by the authorised technical service of TERMİKEL.
SECTION 3 : The Installation of The Product : The location where the cooker is to be placed should be in the appropriate dimensions and in the appropriate form. After the product is cleared from its packaging materials, make sure that the cooker section or any of the other equipment had not been damaged. In case you have any doubts that the product might be damaged, please get in touch with the technical personnel of the authorised service immediately and do not use the product.
The cooker is going to be fixed to the kitchen counter as shown in Figure 3. The thickness of the surface where you will be replacing your built-in cooker should not be more than 20 mms.
Kitchen Table Sealing Gasket Built-in Cooker
Figure 3 Connection Shoe
3. b. The electric connection of the cooker : Before making the electric connection of the cooker, please make sure that you have provided the circumstances that have been mentioned below :
The current transmission capacity of the system and the socket should
be appropriate for the maximum power that the cooker could utilise.
The voltage value that has been provided in the capacity sticker and the
supply voltage should be the same value.
Do not use adapters, short cables or extensions for the said connection.
These may cause over heating.
The socket should have a grounding terminal.
The total power of the product is 000 Watts. The product has been manufactured to be operated with
1A
C9 +]
The electric connection figures are shown in Figure 4. These figure are also shown at the bottom part of the product. The electric chart of the product had been provided in Section 6. Using the said chart, connect the sockets to the female sockets on the built-in oven making sure that colours would match.
The electrical connection of the product is “Y” type and local instructions should be exactly observed. If the supply cord is damaged,it must be replaced by the manufacturer or its service agent or similary qualified persons in order to avoid a hazard
The appliance is designed for using with plug or fixed connection to the mains. There is to install a
n all pole di
sconnector inside the supply circuit with a contact openning of at least 3mm ( rated
A, delay functioning type ). Wiring of the appliance must be performed by the Authorized Service.[PPsupply
cable
must be used.
Please be sure that the voltage and electrical connection conditions of your house conform to your appliance before installing the appliance; and connect your built-in cooker to the power supply with the cord at the rear part of the appliance. Your house and electric inlet must be earthed and conform to the CE di
rectives.
In case that an installation violating the instructions above is performed, the manufacturer company shall take no responsibility. The heat protection class is “Y”.
Warning : The cables should not be allowed to contact the sections that would cause the heat to increase on the same. All of the maintenance and repair works should be undertaken by the authorised technical service personnel or the personnel who had been authorised by the technical service. Warning : In all kinds of maintenance works in respect of the product, please disconnect all of the electric connections.
For a new connection, follow the connection diagrams carefully. The earth connection should be made to the terminal which is shown with (earth symbol shall be used) in the terminal box.
Figure 4
Section 3. Operating The Appliance
Ea ch ce ra mic h eat zon e is op erated b y a con tro l k n ob (se e diag ra m be lo w). V arious he a t lev els ca n be ach ie ved b y sele c tin g th e settings ‘1’ to ‘6’.
Se tting ‘0 ’ is O FF. Se tting ‘1 ’ is LO W an d s ettin g ‘6’ is H IG H .
Use pans that have a thick, flat solid base with the same (or slightly larger) diameter than the heating zone being used
.
Control Knob
1.
operatesIURQW Heat Zone (1.2kw)
Control Knob
2.
operatesEDFN Heat Zone (1.8kw)
The neon red warning lights operate whilst a heat zone is in use or until it has cooled down after use.
For the first time use, operate your electric cooker for 5 minutes in position 3 without placing a utensil on it. This is going to provide for the hardening of the heat resistant material on the cooker. In order to get the maximum efficiency out of the heaters, please pay attention to the sizes of the utensils that are going to be placed on the heaters and the utensil to be flat base one.
Figure 6 : The diameter of the bases of the utensils to be used; should be the same as the diametre of the heater. While buying new sets of utensils, please pay attention to the dimensions of the heater surfaces.
Figure 7 : In order to protect the glass surface of your cooker; the cap of the cooking utensil should be closed during the cooking procedure.
Figure 8 : Aluminium or copper based utensils may leave traces to be cleaned on the glass surface after the cooking procedure which will require cleaning.
Utensils with barbed bases should not be used since they may scratch the glass surface. The bases of the cooking utensils should be clean and dry before using on the cooker. The base of the cooking utensil should be a bit concave while cold. When it is heated in this manner due to a little bir of expansion, the contact with the surface of the cooker would have been increased and the maximum amount of heat transfer is thereby provided from the cooker to the utensil. For the enamel utensil bases the best thickness is 2 to 3 mms; however the same measurement is 4 to 6 mms at its best for stainless steel utensils with sandwich type bases. To decide on whether the base of the utensil is correct or not; a very simple test could be performed (when it is cold). Keep the base of the utensil on a flat table and cut down some paper shreds and pass them underneath the utensil. (for an enamel utensil, 5 to 10 paper shreds; and for a stainless steel utensil, 2 to 5 paper shreds are going to be appropriate).
SECTION 5 : Cleaning and Maintenance : In order to be able to use the cooker in the best consitions possible; please clean the cooker after every time you cook. Make sure that you have cut the electric connection before you start cleaning the cooker. Wait for the cooker to cool down before starting to clean. Do not remove the buttons from their locations.
Warning: The moment you see any kind of fractures on the surface of the hot glass (seran) surface; cut down the supply immediately. Do not use the product under such circumstances. Contact the authorised technical service immediately.
Wanrning: A steam cleaner not be used
Remove all of the food and oil wastes with a glass scrubber without scratching the surface. As a glass cleaner, soft razor nuzzle or the fixed razor could be selected preferably. While the cooker is still hot to touch, clean the cooker with the appropriate liquid cleaner and paper towels. After this, wipe with a wet piece of cloth and dry with a clean and dry cloth. In case sugar or food with a high rate of sugar is spilled over onto the cooker, it should be cleaned in the same manner. Scrubbing sponges, or corroding chemical detergents should not be used under any circumstances including the oven spreys and stain removers.
Figure 9 Figure 10 Figure 11
Rem ove all packaging m aterials and any protective film
applied to the appliance surfaces.
W ipe the glass surface with a soft damp cloth.
This appliance must be ‘hard wired’ to a separate
30amp
cooker circuit with an isolation switch positioned above the work surface. Check the rating plate for further details.
Do not connect this appliance to a standard 13amp socket outlet!
During initial use you may notice a ‘newness’ or ‘hot’ smell coming from the appliance - this is quite normal.
Ne ver allow ch ildre n to p la y w ith this ap plia nce o r op erate the
ap p lian ce un supe rv is ed.
Th is a pplianc e is m anufac tu re d a nd inten ded for D OM E STIC
use on ly. T h e gu a ra ntee o ffere d w ith the ap plia n ce is n o t valid for a n y installation in a co m m ercial en viro nm ent.
Alw ays tu rn off th e e le ctric ity su pply be fo re clea nin g the
exte rn a l su rfa c es of the app lian ce.
Th e e x te rn al surfac e s of this app lian ce g et h ot during us e.
Ta k e ca re w hen u sing th e a pplianc e a nd k e ep c h ild re n we ll aw ay.
Th is a pplianc e m ust b e installed b y a su itab ly q ualifie d
elec trician .
-9--9-
Im po rtan t Note:
This appliance is m arked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipmen t (WE EE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environm ent and huma n health, w hich could otherwise be caused by inappropriate waste handling of this product.
The sym bol on the product, or on the docum ents accompanying the product, the Crossed O ut W heelie Bin, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Disposal m ust be carried out in accordance with local environmental regulations for w aste disposal. For more detailed inform ation about treatm ent, recovery and recycling of this product, please contact your local authority, your household waste disposal service or the retailer where you purchased the product.
W e continuo u s ly try to im prove o u r products for the bene fit of ou r custom ers.
Fo r th is reason we rese rve the rig ht to m ake change s to any p rodu ct at a ny time, w ithout
notic e
Loading...