TermaTech TT1, TT2, TT3 User And Mounting Manual

User and mounting manual

Stove models:

TT1,TT2 and TT3 models

CE approved according to: DS/EN13240

DS (Danish Standard), DIN (Deutsche Industrienorm),

SINTEF (Norwegian Standard) and 15A (Austria)

Version 18.11.09 english

Congratulations on your new wood-burning stove.
We thank you for choosing a TermaTech wood-burning stove and wish you
many cosy and warm moments in the future.

Before using the stove you should read the user and mounting manual so you
are familiar with the legal requirements as well as the instructions regarding
maintenance. By this it is ensured that the product works as it is intended and
you get the most out of your investment for many years to come.

1. Installation instruction

2. Lighting instruction

3. Maintenance

4. Hints

5. Remedy of malfunctions / FAQ

6. Technical specifications

1. INSTALLATION INSTRUCTION

The stove is intended for ”intermittent combustion”. It is not meant to “heat
over” at night. By following the instruction below in “Lighting instruction” the
best and most environmentally friendly combustion is achieved.

The wood-burning stove is delivered ”ready for mounting” (the exhaust branch
may need to be screwed on) and must be connected to the chimney with a
smoke pipe. The connection between stove and chimney must, as far as
possible, be mounted in one straight piece (with as few bends as possible) and
as minimum horizontally, but preferably rising from the stove to the chimney.
Joints must be tight. Remember that is has to be possible to clean the pipe
(possibly with a cleaning hatch on the pipe).

Any unauthorised changes to the wood-burning stove will be viewed as a
structural change and thereby the warranty will be void and is also a risk to
safety.

In the door on your TT stove there is a spring that makes the door close by
itself when you let go of the handle.
This closing device is not a demand in the UK, Denmark and many other
countries and can therefore be removed. In the bottom hinge the split with
lentil head is removed which removes the tension from the spring. This is most
easily done by using a small screw driver and side-cutting pliers.

National and European norms

The regulations in force at the time in question, including those that refer to
national and European standards, must be respected when installing the wood­burning stove. Contact your local dealer for further advice and guidance in
connection with mounting. Notify your Hetas installer before you use your
wood-burning stove. It must be ensured that there is sufficient airflow for the
combustion in the stove, so care must be taken concerning closely shut
windows and doors that may hinder the flow of air to the combustion.

Safety references

The surface of the stove as well as knobs, handle, window, smoke pipe, etc.
become very hot when the stove is in use. Touching these parts without
necessary protection (glove or other protective material) can lead to burns.
Remember to make children aware of this danger and make sure to keep them
away from the wood-burning stove when it is in use. For this purpose
TermaTech offers various grates for the protection of children. (Ask your
dealer)

Allowed in the wood-burning stove

Only use dry and clean wood for combustion in the wood-burning stove.
Maximum size of logs used in the stove is up to 30 cm in length and 10 cm in
diameter.

Only use dry wood. The burning of waste, synthetic materials and other
treated or impregnated materials is not allowed as it is very hazardous to the
environment. Furthermore the stove and the chimney will be damaged by
these materials. There is a danger of emission of unhealthy substances which
can also lead to complaints from neighbours.
Dry and clean wood has a maximum of 20% water which is achieved with
outdoor storage for between 1 year (soft wood) and 2 years (hard wood). The
wood must be in contact with air during storage so the moisture can get out of
the wood.

Firewood is not meant to ”burn overnight”. Never close off the airflow
completely, instead let the fire die out and light it again when you need it.
We warn against closing off the airflow completely. The wood-burning stove
can only burn sensibly and environmentally friendly if there is sufficient airflow
for the combustion.

Cleaning and checks

The wood-burning stove and the smoke pipe should be checked and cleaned
once a year.