TERK Technologies XMDPIO110 User Manual

12 Month Limited Warranty

For Customer Service

Visit Our Website At

www.audiovox.com

Product Information, Photos,

FAQ’s, Owner’s Manuals

VOX ELECTRONICS CORPORATION (the Company) warrants to the

AUDIO
original retail purchaser of this product that should this productor any part
thereof, under normal use and conditions, be proven defective in material or

orkmanship within 12 months from the date of original purchase, such

w
defect(s) will be repaired or replaced with new or reconditioned product (at the
Company's option) without charge for parts and repair labor. To obtain repair or

eplacement within the terms of this Warranty, the product is to be delivered

r

oof of warranty coverage (e.g. dated bill of sale), specification of

with pr
defect(s), transportation prepaid, to an approved warranty station or the
Company at the address shown below. This Warranty does not extend to the
elimination of e
installation, removal or reinstallation of the product, damage to speakers,
accessories, or vehicle and home electrical systems, malfunction of satellite
transmissions, repeater signal or receiver unit. This Warranty does not apply to
any product or part thereof which, in the opinion of the Company, has suffered
or been damaged through alteration, improper installation, mishandling,
misuse, neglect, accident, or by removal or defacement of the factory serial
number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER
THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE
PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This Warranty is
in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE
LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR
BREACH OF ANY WARRANTY HERE UNDER INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF
48 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. No person or representative is authorized to assume for the
Company any liability other than expressed herein in connection with the sale of
this product. Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential
damage so the above limitations or exclusions may not apply to you. This
Warranty gives you specific legal rights and you may also have other rights
which vary from state to state.

U.S.A.: AUDIOVOX ELECTRONICS CORPORATION,
150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 1-800-645-4994
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION
SERVING YOUR AREA

xternally generated static or noise, to costs incurred for

128-7351

SMART DIGITAL ADAPTER

Installation Guide

For customer service and
technical information:: 1.800.290.6650

TERK and TERK logo are registered trademarks of AUDIOVOX Corp.

403P006B

XMDPIO110
Smart Digit

al Adapt

or Pioneer Car St

er f

ereos

Smart Digital Adapter

Smart Digital Adapter

Universal Tuner

XMDPIO110

XMD1000

Adapter

Tuner

Antenna

Head Unit

to constant
12V source

grounded

Introduction

Thank you for purchasing the TERK Smart Digital Adapter for
satellite radio ready Pioneer car stereo head units. This product
must be used in conjunction with the XM Universal Tuner Box
(part # XMD1000) sold seperately. The Smart Digital Adapter for
Pioneer allows you to adapt a satellite radio ready car stereo to
receive XM Satellite Radio service.

Important Note::

The TERK Smart Digital Adapter for Pioneer car stereo head
units is compatible with most Pioneer head units displaying
the logo. For a complete compatibility list go online
to TERK.com/XMDirect

The XMDPIO110 is easy to install plugging directly into the
XMD1000 and the Pioneer car stereo head unit*. The illustration
below shows the complete installation of the XM Direct system,
including the XMDPIO110 and the XMD1000 into your Pioneer car
stereo head unit.

Installation Overview

Smart Digital Adapter

Installation Basics::

When choosing a location to mount the components, care must be
taken not to interfere with any of the vehicles existing systems.
Good installation practices should be observed when mounting
components to avoid any vibration, movement or rattling after
installation. When routing the cables avoid blocked passages and
any obstructions that could kink, crimp, twist, or chafe the cables.
Components should be secured in place with methods such as
Velcro, double stick foam tape, screws and nuts, cable ties etc. All
mounting hardware and methods are at the discretion of the installer.
Cables should also be secured in place to avoid movement. Care
should be taken not to crimp any of the cables when installing them.
And special care should be taken not to route cables on or near sharp
edges that could eventually cut into the jacket of the cable.

Installation Planning::

The XMDPIO110 should be located within 2-3 feet of the XMD1000
due to the cable lengths. The antenna should be located in an area
to insure the cable will reach the tuner location. Check this prior
to installation. The installation guide supplied with your XM
Universal Tuner and bundled antenna has additional information
on antenna location and installation.

1

Fig. 1

*IT IS RECOMMENDED THAT A PROFESSIONAL INSTALLER

INSTALLS THE XM DIRECT SYSTEM (XMDPIO110 AND XMD1000).

2